• 제목/요약/키워드: sample rate

검색결과 3,344건 처리시간 0.03초

냉동건조에 의한 잎담배 팽화특성 (Characterization of Expanded Tobacco Lamina Tissues by Freeze Drying)

  • 김병구
    • 한국연초학회지
    • /
    • 제17권2호
    • /
    • pp.149-159
    • /
    • 1995
  • The freeze drying rate was investigated under various conditions such as pressure and moisture contents in order to establish the optimum condition for expansion of the culled flue cured tobacco lamina. The optimal pressure in the chamber to maintain the heat and mass transfer was about 0.8torr, When the moisture contents of sample was 50-60%, expanding rate was the optimum condition and the rate was 67-76%. As the thickness of the sample layers was increased, drying-rate was decreased conversely and this result seemed to be due to decline of heat and mass transfer coefficients. Differences with the position of its stalk were also observed in drying rate, and low stalk position leaves of 5 and 3 was the fastest. Key words : freeze drying, Popping, expansion tobacco.

  • PDF

음성의 변곡점 추출 및 전송에 기반한 가변 데이터율 음성 부호화 기법 (A Variable Data Rate Speech Coding Technique Based on the Inflection Point Detection of Speech)

  • 임병관
    • 전기학회논문지
    • /
    • 제62권4호
    • /
    • pp.562-565
    • /
    • 2013
  • A new variable rate speech coding technique is proposed. The method is based on the observation that the speech signal approximately looks linear for a very short period of time. The information transmitted is the location and data value of inflection points. If the distance between the inflection points is large, the mid point location and its data value are also delivered. Thus, the encoder transmits both the location and the data value for the inflection samples, but the location only for the non-inflection points. The location information is expressed using one bit for each sample, 0 for non-inflection and 1 for inflection point. At the receiver, using the interpolation, the decoder estimates the untransmitted sample values for non-inflection locations from the received sample values for the inflection samples. With 50 % of computational cost of the existing CVSD delta modulation, the proposed method is expected to achieve the data rate of 36 to 38 kbps and the SNR of 10 to 13 dB.

Simulation of the Determination of NaCl Concentration in Concrete samples by the Neutron induced Prompt Gamma-ray Method

  • Kim, Hyeon-Soo
    • 한국환경과학회지
    • /
    • 제13권2호
    • /
    • pp.175-180
    • /
    • 2004
  • A prompt gamma-ray neutron activation (PGNA) system was simulated by the Monte Carlo N-Particle transport code (MCNP-4A) to estimate the level at which the scattered photon fluence rate, the absolute efficiency of the HPGe-detector, the volume of the concrete sample and the $^{35}$ /Cl(n, ${\gamma}$) reaction rate in this sample contribute to the count rate in the NaCl concentration measurement. The n- ${\gamma}$ fluence rates at the ST-2 beam tube exit of the HANARO reactor were used as input data, and the GAMMA-X type HPGe detector was modeled to tally 1.1649 MeV ${\gamma}$ -rays emitted from the $^{35}$ Cl(n, ${\gamma}$) reaction in the concrete sample. For three cylindrical concrete samples of 13.8, 46.8 and 157.1 ㎤ volumes, respectively, the relations between the NaCl weight fractions of 0.1, 1, 2 and 5 % in each of the concrete samples and the 1.1 649 MeV pulses created in the HPGe detector model were studied. As a result, it was found that the count rate at the same NaCl concentration nearly depends on the volume of the samples in a simulated condition of the same NaCl concentration samples, and that the linearities of the NaCl concentration calibration curves were reasonable in the narrow range of the NaCl weight fraction.

Minimum detectable activity of plastic scintillator for in-situ beta measurement system in ground water

  • Choi, Woo Nyun;Lee, UkJae;Bae, Jun Woo;Kim, Hee Reyoung
    • Nuclear Engineering and Technology
    • /
    • 제51권4호
    • /
    • pp.1169-1175
    • /
    • 2019
  • The minimum detectable activity (MDA) value was derived according to the flow rate of the sample and degree of amplification of the device by sending the sample directly from the collection site to the detection part through a pump. This method can lead to reduction in time and cost compared to the existing measurement method that uses a pre-treatment process. In this study, experiments were conducted on $^3H$ and $^{90}Sr$, which are the major pure beta-emitting radionuclides, by setting the sample flow rate and the amplification gain as factors. The MDA values were derived according to the flow rates, considering that the flow rate can affect the MDA values. There were no change in the MDA under different flow rates of 0, 600, 800, and 1000 mL/min. Therefore, it was confirmed that the flow rate may not be considered when collecting samples for monitoring in actual field. As the degree of amplification of the amplifier increased, the time required to reach the target MDA decreased. When the amplification was quadrupled, the detection efficiency increased by approximately 23.4 times, and the time to reach the MDA decreased to approximately 1/550 times. This method offers the advantage of real-time on-site monitoring.

층별 응답률을 사용한 멱배정 방법의 확장 (Expansion of power allocation using response rate per stratum)

  • 박현아
    • 응용통계연구
    • /
    • 제34권5호
    • /
    • pp.671-683
    • /
    • 2021
  • 멱배정의 전체 효율은 최적배정보다 감소하지만, 층별 표본을 골고루 배정하는 기법이며 조사 현장에서는 제곱근 비례배정으로 많이 사용된다. 그리고 실제조사에서는 무응답을 고려하여 이론적 공식에서 나오는 것보다 더 많은 표본크기를 추출한다. 본 연구에서는 층별 표본크기를 결정함에 있어서 멱배정 방법에 층별 응답률의 정보를 추가하여 배정하는 기법을 연구한다. 제안된 배정기법들을 비례,최적,제곱근 비례 배정과 비교하며 응답률이 추가된 비례, 최적배정과도 비교하는 것을 모의실험을 통해 살펴봄으로써 배정방법들의 장단점을 살펴본다.

[ $\bar{X}$ ] Control Charts with Variable Sample Sizes and Variable Sampling Intervals

  • Lee, Jae-Heon
    • Journal of the Korean Data and Information Science Society
    • /
    • 제14권3호
    • /
    • pp.429-440
    • /
    • 2003
  • Variable sampling rate (VSR) control charts vary the sampling interval and/or the sample size according to value of the control statistic. It is known that $\bar{X}$ charts with VSR scheme lead to large improvements in performance over those with fixed sampling rate (FSR) scheme. In this paper, we studied $\bar{X}$ charts with several VSR schemes, and compared their statistical performance each other.

  • PDF

관절염 백선의 부종과 혈액에 미치는 천수근의 효능연구 (Study of Effects of Harpagophyti Radix on Edema and Blood of Rats with Arthritis)

  • 이정훈;김연섭
    • 동의생리병리학회지
    • /
    • 제18권2호
    • /
    • pp.446-450
    • /
    • 2004
  • Objectives: In order to study the effects of Harpagophyti Radix in rats with arthritis induced by Freund's complete adjuvant. Methods : In this study, rats with arthritis induced by Freund's complete adjuvant were divided into four groups; Normal, Control, Sample A(Harpagophyti Radix 6mg/200g) and Sample B(Harpagophyti Radix 12mg/200g). After 1 week, separated searches were made on the change of edema rate, the count of WBC, the quantity of total protein, total bilirubin, GOT and GPT in the serum. Results: In the right plantar edema, both of Sample groups showed a decrease in comparison with Control group. In the count of WBC, the quantity of serum total protein and SGOT, Sample B showed a decrease with statistical significance in comparison with Control group. In the quantity of serum total bilirubin and SGPT, both of Sample groups did not show any harmful change in in comparison with Control group. Conclusion : Reviewing these experimental results, it appeared that Harpagophyti Radix showed the therapeutic effect of anti-inflammatation on adjuvant arthritis.

Properties of Merging Galaxies in the Nearby Universe

  • 박종한;안홍배;강혜성
    • 천문학회보
    • /
    • 제36권2호
    • /
    • pp.70.1-70.1
    • /
    • 2011
  • We have investigated properties of merging galaxies in the nearby universe, using Sloan Digital Sky Survey (SDSS) DR7. We first constructed two galaxy samples according to redshift range: Sample 1 for 0 ${\leq}$ z ${\leq}$ 0.025 and Sample 2 for 0.09 ${\leq}$ z ${\leq}$ 0.1. We then identified 118 and 184 merging galaxies among the galaxies in the Sample 1 and 2, respectively, and classified them into different merging types and stages by visual inspection of galaxy images. In the Sample 1, there are more wet mergers than dry mergers, while most merging galaxies in the Sample 2 are dry mergers. The color-magnitude diagram of the merging galaxies in our samples is comparable to that of normal galaxies. Dry mergers tend to locate in the red sequence, while wet and mixed mergers reside mostly in the blue cloud. Unlike some previous studies, we did not find a clear trend that the merger rate increases at higher redshift. However, it is difficult to make a direct comparison of the merger rate found in different studies, because it depends on the number of observed galaxies and criteria for merger classification. From the ratios of emission lines, we infer that the faction of merging galaxies with AGNs is higher in wet mergers than in other types.

  • PDF

Freon Gas흡착 및 열처리에 의한 담배조직의 물리적, 역학적 특성변화연구 (Changes in Physical and Mechanical Properties of Freon-Adsorbed and Heat - Treated Leaf Tobacco)

  • 김기환;유광근;주영석
    • 한국연초학회지
    • /
    • 제6권1호
    • /
    • pp.39-49
    • /
    • 1984
  • In the tobacco industry, it is important to study the change of mechanical property occurring the expansion process. The purpose of this study is to attain basic data for development of a tobacco expansion method. 1 . Freon gas was adsorbed to tobacco under various conditions of temperature, relative humidity and pressure, and then the amount of freon gas adsorbed was analyzed by GC. Freon adsorption rate of Burley 21 was more than that of By104 at the same condition and about 17 $\pm$ 1% moisture content produced better adsorption rate. 2. Freon adsorbed sample were heated to about $150^{circ}C\;to\;230^{\circ}C$ in a drying oven and recycle duct form about 2 to 30 seconds, and then the change of mechanical property were measured. Heated leaf was damaged when the tissue was pressed by the force of above $0.5x10^8dyn/cm^2$. The optimum condition of no damage of the sample was below the temperature of 15$0^{\circ}C$ and heating time of 10 seconds. It was more economically advantages to treated sample in a recycle duct than to be in a drying oven. By this process, the specific volume of the heated sample was increased from 80 to 110 percent in comparison to that of untreated sample.

  • PDF

아크릴계 수지(Paraloid B-72)가 사찰벽화 보존에 미치는 영향에 관한 연구 - 금산사 미륵전 외벽화를 중심으로 - (Assessing the Effects of Acrylic Resin (Paraloid B-72) on Buddhist Mural-painting conservation - Focusing on Outside Mural Paintings of Mireuk Hall in Geumsan Temple -)

  • 이경민;한경순;이화수
    • 보존과학연구
    • /
    • 통권29호
    • /
    • pp.65-90
    • /
    • 2008
  • This study examines the status and the physical features of Paraloid B-72 layers with examination of microstructure and analysis of organic matters. Paraloid B-72 layers were coated on samples from the colour layer of outer wall painting in Mireuk hall in Geumsan temple. On the basis of the previous examination result, it has made the samples which are similar to outer wall in Mireuk hall in Geumsan temple. The samples can be divided into two, one; 5% Paraloid B-72 coating and another is without coating. Then samples have been experimented under the compulsive environments of infrared radiation and immersion, thereafter compared the results of the damages and physical features between two samples. As a result of the comparison, the sample with Paraloid B-72 had more serious cracks, exfoliations and peeling layers than that of without Paraloid B-72. Otherwise, in the examination of ultraviolet radiation, the sample with Paraloid B-72 coating showed weaker physical properties, less density in structure of colour layer and less hardness in surface of colour layer than the sample without coating. The percentage of moisture content after the ultraviolet radiation was higher in the sample without Paraloid B-72 than the sample with Paraloid B-72 coating. Observing the conditions before the ultraviolet radiation, the sample with Paraloid B-72 coating demonstrated lower rate in moisture evaporation rate than the sample without Paraloid B-72. As a consequence, in examination of this samples, the change of physical features are increased in the sample with Paraloid B-72 coating than that without Paraloid B-72 when compulsive environment of heat, moisture and ultraviolet rays for a short term are imposed.

  • PDF