• Title/Summary/Keyword: sample rate

Search Result 3,336, Processing Time 0.03 seconds

Experimental Study on the Channel Type Heat Sink to Maintain Proper Temperature Cycle of Bio-Sample (바이오 시료의 적정온도 사이클 유지를 위한 채널형 히트싱크에 대한 실험적 연구)

  • Jeong-Gyu Hwang;Sang-Hee Park
    • Journal of the Korean Society of Industry Convergence
    • /
    • v.26 no.1
    • /
    • pp.183-191
    • /
    • 2023
  • This study was conducted experimentally to investigate the surface temperature of the heat sink, the air temperature in the flow channel and the sample temperature by changing the channel number of channel type heat sink and the air flow rate when heating and cooling the bio sample. The target temperature of the sample was 15℃ or less as the minimum value and 82℃ or more as the maximum value. In this study, the channel number of the heat sink(N = 1, 2, 4, 5, 10) and the air flow rate(Q=25, 42, 54m3/min) were varied. The bio sample was replaced with water, and the volume of water is 4mL. The size of the heat sink is 80x73x150mm and the material is aluminum. When cooling the sample, the surface temperature, the air temperature and the sample temperature were highly dependent on the number of channels and the flow rate. However, when the sample is heated, the surface temperature, air temperature and sample temperature do not depend on the number of channels and the flow rate. It was found that the conditions for satisfying the minimum temperature of 15℃ or less when cooling the sample were the number of channels N≥5 and the flow rate Q≥42m3/min. When heating the sample, the conditions to satisfy the maximum temperature of 82℃ or more are the number of channels N≤5 and the air flow rate Q≤42m3/min.

The influence of sputtering rate during depth profiling (Depth Profiling에서 Sputtering Rate의 영향)

  • 김주광;성인복;김태준;오상훈;강석태
    • Journal of the Korean Vacuum Society
    • /
    • v.12 no.3
    • /
    • pp.162-167
    • /
    • 2003
  • To find the concentration according to the depth-direction of ions implanted in the sample, with sputtering of the sample surface, one needs the depth profiling of ion implanted in the sample. On measuring of depth profiling, the sputtering rate to affect depth direction, is calculated by SRIM simulation. When ion is implanted in the sample, the atomic density of the sample rises up a little, and it alters sputtering yield. This alteration then causes differences of sputtering rate to affect depth-direction, on measuring of depth profiling. With the usage of SRIM Monte Carlo simulation code, one calculates sputtering rate, with sputtering yield by the alteration of atomic density of the sample through ion implantation. As a result, it goes to prove that its difference affects depth distribution, on measuring of depth profiling.

Purgative Effect of Jechun-Jun(Jichuan-Jian) and Add or Omit Herbs in Rat (제천전(濟川煎)과 약물(藥物) 가감(加減)이 흰쥐의 사하작용(瀉下作用)에 미치는 영향(影響))

  • Lee Seung-Hee;Lee Sang-Jun;Park Soo-Yeon;Kim Hong-Yeoul;Park Seong-Kyu
    • Herbal Formula Science
    • /
    • v.10 no.1
    • /
    • pp.73-80
    • /
    • 2002
  • We have examined the purgative effect of three Jechun-jun formulas in sprague dawley(SD) rat. Three jechun-jun formulas were Jechun-jun(Sample I ) and augmented Jechun-jun(Sample II) and augmented Jechun-jun add rhubarb(sample III ). We examined the amount and the humidity of feces in rat. The experimental animals were devided into four groups. as control group and three Jechun-jun (sample I, II, III). We administerd the water extract of sample I, II, III to rat per oral for 8days long. After every 24hours measured the amount of wet feces from rats in metabolic cage. Humidity rate of feces from rat was at first measure wet feces for 24hours (W) and measure dried feces (W1) and then we consider W-W1 as humidity. High humidity rate means constipation changes into moistening stool. The amount of wet feces and humidity rate of feces in rats were increased in sample I, II, III. Sample I has highest humidity rate of feces. so showed strong moistening effect. Sample II has mild effect in treating constipation. sample III has most amount of wet feces. in conclusion Jechun-jun has an effect of moistening stool. and augmented Jechun-jun add rhubarb has strong purgative effect.

  • PDF

Representative of Sample and Efficiency of Estimation (표본의 대표성과 추정의 효율성)

  • Kim, Kyu-Seong
    • Survey Research
    • /
    • v.6 no.1
    • /
    • pp.39-62
    • /
    • 2005
  • In this paper we investigate some concepts frequently called in sample surveys such as 'representative of sample' as well as 'consistency', 'unbiasedness', and 'efficiency' in estimation. The first is strongly related with sampling procedure including coverage rate of survey population, response rate in establishment survey, and recruit rate of final samples. The others, however, are concerned with both sampling design and corresponding estimators simultaneously. Whereas both consistency and unbiasedness are based on the representative sample, efficiency does not depend on the representative sample. The representative of sample can be increased by raising the rate of coverage, response and recruit as well. Consistency may be investigated according to variables of interest and auxiliary variables. The well-known raing-ratio weighting method is a method to increase consistency of auxiliary variables by means of matching population size in each cell. Efficiency is not directly related with the representative of sample, and allocation methods such as proportional and Neyman allocation in stratified sampling and post-stratification are all methods to increase the efficiency of estimation under the condition of satisfying the representative of sample.

  • PDF

Quality Characteristics of Muffins containing Maesangi Powder Abstract (매생이가루 첨가량에 따른 머핀의 품질특성)

  • Seo, Eun-Ok;Kim, Kwang-Oh;Ko, Seong-Hye;Park, Jin-Hee;Han, Eun-Ju;Cha, Kyung-Ok;Ko, Eun-Hee
    • Journal of the East Asian Society of Dietary Life
    • /
    • v.22 no.3
    • /
    • pp.414-421
    • /
    • 2012
  • Moisture content of muffin tended to increased as increasing mixing rate of maesangi. For crude protein, sample group of 9% replaced by maesangi powder was the highest. For crude fat and crude ash, there was no significant difference among sample groups. The average height of muffin was 4.7 cm, but was no significant difference among sample groups. Volume of muffin has been gradually increased as increasing mixing rate of maesangi powder, but was no significant difference among sample groups. From the SEM (scanning electron microscope) result, thick cell wall and rough blowholes were appeared. L-, a and b-values of muffin was declined as per increase of mixing rate of maesangi powder. Hardness was inclined as per increase of mixing rate of maesangi powder. There were significant differences between sample groups and reference group for adhesiveness, springiness and cohesiveness, but was no significant difference among sample groups. For gumminess, sample group of 9% replaced by maesangi powder was the highest, but there were no significant difference from sample groups of 3% and 6% replaced by maesangi powder. Chewiness was inclined as per increase of mixing rate of maesangi powder, and sample group of 9% replaced by maesangi powder was the highest. From sensory test result, sample group of 9% replaced by maesangi powder was the highest for color, and there were significant differences among sample groups. Sample group of 6% replaced by maesangi powder was the highest for flavor and taste, and there were significant differences among sample groups. Sample groups of 6% and 9% replaced by maesangi powder were the highest for texture. Sample group of 9% replaced by maesangi powder was the highest for overall preference. From all these results, the most suitable one would be the sample group of 9% replaced by maesangi powder.

Dispersion of Li[Ni0.2Li0.2Mn0.6]O2 Powder by Surfactant for High-power Li-ion Cell

  • Yun, Su-Hyun;Park, Yong-Joon
    • Bulletin of the Korean Chemical Society
    • /
    • v.30 no.7
    • /
    • pp.1598-1602
    • /
    • 2009
  • The particle size of Li[$Ni_{0.2}Li_{0.2}Mn_{0.6}]O_2$ cathode powder was controlled effectively by dispersion using lauric acid as a surfactant. The samples treated by lauric acid showed smaller particles of approximately half the original size compared to the particles of a pristine sample. A structural change due to the dispersion of Li[$Ni_{0.2}Li_{0.2}Mn_{0.6}]O_2$ powder was not detected. The rate performance of the Li[$Ni_{0.2}Li_{0.2}Mn_{0.6}]O_2$ cathode was improved by dispersion using lauric acid, which was likely due to the decrease of the particle size. In particular, a sample dispersed pristine powder using lauric acid (L2) presented a greatly enhanced discharge capacity and capacity retention at a high C rate. The discharge capacity of a pristine sample was only 133 m$Ahg^{-1}$ (3C rate) and 96 m$Ahg^{-1}$ (12C rate) at the tenth cycle. In contrast, the L2 electrode delivered higher discharge capacities of 160 m$Ahg^{-1}$ (3C rate) and 129 m$Ahg^{-1}$ (12C rate) at the tenth cycle. The capacity retention at a rate of 12C/2C was also enhanced from ~ 45% (pristine sample) to 57% (L2) by treatment with lauric acid.

The Effects of Yanghyulsamultanggamibang to Allergic Contact Dermatitis (양혈사물탕가미방(凉血四物湯加味方)이 Allergy성(性) 접촉(接觸) 피부염(皮膚炎)에 미치는 영향(影響))

  • Kim, Chang-Hwan;Kim, Kyung-Jun
    • The Journal of Korean Medicine Ophthalmology and Otolaryngology and Dermatology
    • /
    • v.18 no.1
    • /
    • pp.13-26
    • /
    • 2005
  • Experimental drug was applied to a white male mouse taken ill with allergic contact dermatitis to investigate the effects of Yanghyulsamultanggamibang. 1. In case of skin moisture, when it was checked 72 hours later, there showed up meaningful differences among the normal, control, and sample groups. Especially, the moisture increased more noticeably in the sample group than in the control group. 2. With regards to RBC count in blood, it increased more in the control and sample groups than in the normal group when it was checked both in 24 hours and 72 hours. When it was checked in 48 hours, the number of RBC in the sample group increased the most, and the count in the control group increased more than in the normal group. 3. About the neutrophil rate in WBC count, it increased meaningfully more both on the control and sample groups than in the normal group in 24 hours. When the rate was checked in 48 hours, it increased the most in the sample group, and it increased more in the control group than in the normal group. When in checked72 hours later, it increased substantially more in the control group than both the sample and normal group. 4. As of the lymphocyte rate in WBC count, when measured in 24 hours, it increased in the normal group than in the control and sample groups. In 48 hours, it increased the most in the normal group, and it increased meaningfully more in the control group than in the sample group. 5. Regarding the total IgE, when measured 24 hours later, it increased noticeably more in the normal group than in the control and sample groups. In 48 hours, there showed up substantial differences among the normal, control and sample groups. In particular, it increased meaningfully more in the control group than in the sample group. 6. When the sample of skin tissue was examined, the corneal layer restoration increased more in the sample group than in the normal group. The above-mentioned results prove that Yanghyulsamultanggamibang can be taken when allergic contact dermatitis develops on the skin. Long-term observation afterward is also advised.

  • PDF

Studies on the catalytic charcoaling (촉매적(觸媒的) 제탄(製炭)에 관(關)한 시험(試驗))

  • Park, Tae Sik;Park, Meung Gue
    • Journal of Korean Society of Forest Science
    • /
    • v.3 no.1
    • /
    • pp.18-22
    • /
    • 1963
  • 1. Objects The experiments of catalytic aharcoaling were carried out for the fallowing purposes. (1) To determine the economically desirable amount of catalytic materials to be used when a catalytic charcoaling is practiced. (2) To observe the rate of carbonization of non-treated charcoal wood when the catalytic charcoaling is proceeded in the same charcoal pit. 2. Meterials (1) Small sample chips made of oak (Q. accutissima Carr.), measured by 0.5cm in width and thickness, respectively, and 1cm in length, were used as charcoal wood in each experiment. (2) Ammonium chloride was used as a catalytic material and electric kiln as a charcoaling apparatus. 3. Experiment (1) The sample chips were put into a electric oven for three hours at the temperature $60^{\circ}{\sim}70^{\circ}C$ in order to reduce some water contents. (2) Oven dried sample chips were then soaked for an hour in solution of ammonium chloride. Three kinds of solution were prepared, that is, 2.5%, 5%, and 10%, solution in which the amount of ammonium chloride used was weighed at the rate of 0.5%, 1.0%, and 2.0% to the total weight of the sample chips, resppectivelly. (3) Soaked sample chips were put in the air for 12 hours to reduce some water contents, and then were put into electric oven for 2 hours at the temperature $105^{\circ}{\sim}110^{\circ}C$. (4) Dried sample chips were kept in a desiccator with control sample chips which were treated excarly the same process as the treated sample chips except only not using the ammonium chloride in the process of soking. (5) Sample chips kept in the desiccator were used at random in each charcoaling experiment. (6) Charcoaling in the electric kiln were carried out by using small crucibles with complete cover to reduce the amount of ash. At each charcoaling experiment four crucibles filled with sample ships, weighed about 20gr, were put into electric kiln. The charcoaling was continued for an hour at the temperature $400^{\circ}{\sim}450^{\circ}C$. (7) In order to investigate the influence given by the gases produced during the catalytic charcoaling to the rate of carbonization of non-treated sample chips, the following experiment was done. (a) A crueible was divided into two parts by inserting a fine iron net at the middle of the crucible, and then non-treated sample chips, weighed about 10gr, were put in the upper part of the crucible and treated sample chips, weighed also about 10gr, were put in the under part. (b) The crucibles filled with two kinds of sample chips were put into a electric kiln for an hour at the temperature $400^{\circ}{\sim}450^{\circ}C$. 4. Results. Results for two replications (with four crucibles in one replication) for each experiment designed are as follows : (1) The rats of carbonization of the non treated sample chips, and that of the treated sample chips with ammonium chloride at the rate of 1.5%, 1.0%, and 2.0% to the total weight of the sample chips used were averaged at 19.85%, 22.63%, 24.14%, and 26.60%, respectively. (2) The rats of carbonization of the non-treated sample chips were averaged at (a) 20.04% (0.5% treatment), (b) 20.28% (1.0% treatment), and (c) 20.61% (2.0% treatment) when the treated sample chips were carbonized in the same crucible.

  • PDF

Effect of Cooling Rate on Damping Capacity of Magnesium (마그네슘의 진동감쇠능에 미치는 냉각 속도의 영향)

  • Jun, Joong-Hwan
    • Journal of the Korean Society for Heat Treatment
    • /
    • v.30 no.6
    • /
    • pp.258-263
    • /
    • 2017
  • The effect of cooling rate on the damping capacity of pure Mg was studied. Two Mg samples with different cooling rates were prepared by heat treatment at 873 K for 24 h, followed by water quenching and by furnace cooling to room temperature, respectively. The average grain sizes of the Mg samples were almost identical regardless of the cooling rate, but more twins were observed in the sample with faster cooling rate. The calculated vacancy fraction was higher in the fast cooling sample than the slow cooling one. It is noted that the fast cooling sample exhibited lower damping capacity both in the strain-amplitude independent and strain-amplitude dependent regions. Higher values of vacancy concentration and number density of twins in the fast cooling sample are considered to be responsible for the deteriorated damping capacity in the strain-amplitude independent and strain-amplitude dependent regions, respectively.

A Study on Run-off of Small Basins Representing the four major Rivers in Korea (소류역의 유출량에 관한 연구 (사대강을 중심으로))

  • 이석우;김시원;엄태영
    • Magazine of the Korean Society of Agricultural Engineers
    • /
    • v.22 no.2
    • /
    • pp.55-63
    • /
    • 1980
  • To study run-off characteristics in the small watersheds in Korea, investigations had been carried out for a period of 4 years from 1972 to 1975 in the sample watersheds. The samples were selected in four major river basins such as the Han River, the Keum River, the Nakdong River and the Yongsan River. Water levels and rainfall data had been. collected from each sample area where the measuring instruments were installed. The findings of this investigation can be summarized as follows; 1. With an average runoff rate of 60% in the sample watersheds, the average runoff rate. in each sample proved to be as below; the Han River Basin : 41.4% the Keum River Basin : 61.7% the Nakdong River Basin : 69.4% the Yong San River Basin : 69.2% 2. The base flow rate in the sample watersheds proved to be 8.1 mm/month. 3. A comparison of the runoff obtained from actual measurements made and that calculated by the Kaijyama formula showed that the latter is 9.1% lower than the former.

  • PDF