• 한국정보과학회논문지:시스템및이론
• /
• 제36권3호
• /
• pp.210-216
• /
• 2009

CPU기반의 볼륨 광선 투사법을 위하여 빈 공간을 도약하는 많은 방법들이 소개되었다. 하지만 광선의 샘플점이 투명한 공간과 비투명한 공간 사이에 있는 반투명-셀에 놓일 경우 기존의 방법들은 투명도 값을 매번 계산해야 하는 문제점이 있다. 이 문제를 해결하기 위하여 기존 마칭큐브를 이용하는 방법이 제안되었다. 광선이 반투명-셀에 도착하면 마칭큐브 방법을 이용하여 생성된 삼각형들을 둘러싸고 있는 육면체를 구하고, 현재 샘플점이 육면체 내/외부에 있는지 계산한다. 샘플점이 육면체 외부에 위치하면 투명하다고 판단되어 재샘플링 연산없이 다음 샘플점으로 이동한다. 하지만 기존의 마칭큐브 테이블 구조를 그대로 이용하면 인접한 복셀의 테이블 값을 여러 번 참조해야 하므로 비효율적이다. 본 논문에서는 볼륨 광선 투사법에 적합한 마칭큐브 테이블을 제안함으로써 렌더링 속도를 높인다.

• Restorative Dentistry and Endodontics
• /
• 제43권2호
• /
• pp.15.1-15.7
• /
• 2018

Objectives: The present study aimed to evaluate the shaping ability of 2 thermally treated nickel-titanium reciprocating systems in simulated curved canals. Materials and Methods: Forty simulated canals were prepared to apical size 25 using Reciproc Blue R25 (VDW) and WaveOne Gold Primary (Dentsply Sirona) instruments. Standard pre- and post-preparation images were taken and superimposed. The removal of resin material was measured at 5 standard points: the canal orifice, halfway between the canal orifice and the beginning of the curve, the beginning of the curve, the apex of the curve, and the end-point of the simulated canal. The data were analysed using the independent sample t-test with a 5% significance threshold. Results: The canals in which Reciproc Blue R25 was used showed a significantly greater widening than those in which WaveOne Gold was used at 4 of the 5 measurement points (p < 0.05). The Reciproc Blue R25 instrument removed significantly more resin from the inner aspect of the curve at 2 of the 5 points and similar amounts at the remaining 3 points. At the 2 apical points, there was no significant difference between the Reciproc Blue R25 and WaveOne Gold Primary instruments. Conclusion: Both instruments respected the original canal anatomy; however, WaveOne Gold resulted in a more conservative shape with less transportation.

• Communications for Statistical Applications and Methods
• /
• 제15권5호
• /
• pp.709-717
• /
• 2008

The difference of two one-sided kernel estimators is usually used to detect the location of the discontinuity points of regression function. The large absolute value of the statistic imply discontinuity of regression function, so we may use the difference of two one-sided kernel estimators as the test statistic for testing null hypothesis of a smooth regression function. The problem is, however, we only know the asymptotic distribution of the test statistic under $H_0$ and we hardly expect the good performance of test if we rely solely on the asymptotic distribution for determining the critical points. In this paper, we show that if we adjust the bias of test statistic properly, the asymptotic rules hold for even small sample size situation.

• 한국지능시스템학회:학술대회논문집
• /
• 한국퍼지및지능시스템학회 1998년도 The Third Asian Fuzzy Systems Symposium
• /
• pp.426-431
• /
• 1998

We propose a fuzzy rule based method for structure preserving dimensionality reduction. This method selects a small representative sample and applies Sammon's method to project it. The input data points are then augmented by the corresponding projected(output) data points. The augmented data set thus obtained is clustered with the fuzzy c-means(FCM) clustering algorithm. Each cluster is then translated into a fuzzy rule for projection. Our rule based system is computationally very efficient compared to Sammon's method and is quite effective to project new points, i.e., it has good predictability.

• 한국경영과학회지
• /
• 제17권2호
• /
• pp.91-106
• /
• 1992

It an inventory control system, the demand over time are often assumed to be independently identically distributed (i. i. d.). However, the demands may well be correlated over time in many situations. The estimation of reorder points is not simple for correlated demands with variable lead time. In this paper, a general class of autoregressive and moving average processes is considered for modeling the demands of an inventory item. The first four moments of the lead-time demand (L) are derived and used to approximate the distribution of L. The reorder points at given service level are then estimated by the three approximation methods : normal approximation, Charlier series and Pearson system. Numerical investigation shows that the Pearson system and the Charlier series performs extremely well for various situations whereas the normal approximation show consistent underestimation and sensitive to the distribution of lead time. The same conclusion can be reached when the parameters are estimated from the sample based on the simulation study.

• Communications for Statistical Applications and Methods
• /
• 제29권1호
• /
• pp.127-150
• /
• 2022

We discuss multiple change-point estimation as edge detection in piecewise smooth functions with finitely many jump discontinuities. In this paper we propose change-point estimators using concentration kernels with Fourier coefficients. The change-points can be located via the signal based on Fourier transformation system. This method yields location and amplitude of the change-points with refinement via concentration kernels. We prove that, in an appropriate asymptotic framework, this method provides consistent estimators of change-points with an almost optimal rate. In a simulation study the proposed change-point estimators are compared and discussed. Applications of the proposed methods are provided with Nile flow data and daily won-dollar exchange rate data.

• 품질경영학회지
• /
• 제45권4호
• /
• pp.943-956
• /
• 2017

Purpose: This paper proposes a VSS(Variable Sample Size) ${\bar{X}}$ control chart using surrogate variable and shows its effectiveness compared with FSS(Fixed Sample Size) ${\bar{X}}$ control chart using either performance variable or surrogate variable. Methods: The expected cost function of VSS ${\bar{X}}$ control chart is derived. The optimal designs are then found for numerical examples using a GA(genetic algorithm) and compared to those of the FSS ${\bar{X}}$ control charts. Results: Computational results show that VSS ${\bar{X}}$ control chart using surrogate variables is superior to FSS ${\bar{X}}$ control chart using either performance variable or surrogate variable from the economic view points. Conclusion: The proposed VSS ${\bar{X}}$ control chart will be useful in industry fields where a performance variable is not avaliable or too costly.

• 아태비즈니스연구
• /
• 제13권3호
• /
• pp.329-341
• /
• 2022

Purpose - The purpose of this study was to investigate consistency in estimating the number of vacant jobs using the two business labor force survey with two different time points of survey. Design/methodology/approach - We studied the cause of the differences in estimating the number of vacant jobs between the monthly sample and the new sample in business labor force survey. Findings - To summarize our findings, As the size of the company increases, the number of vacant jobs in the company also increases, and the probability that the number of vacant jobs in the company is zero decreases. The monthly sample was assessed to have a higher likelihood that the number of vacant jobs in the company was zero and the number of vacant jobs was considerable compared to the local sample. Research implications or Originality - Because local survey sample companies tend to minimize the number of vacant jobs even when they reply under the same conditions, the estimation result of the number of vacant jobs in the current monthly survey differs significantly from the estimation result of the local survey. Divergent "degrees of knowledge of question items," survey methodologies, or investigators could be the causes of the various response trends.

• Communications for Statistical Applications and Methods
• /
• 제9권3호
• /
• pp.877-887
• /
• 2002

In this paper, behaviors and properties of p-values for goodness-of-fit test are investigated. With some findings on the p-values, we consider some applications to determine sample size of a survey research using the regression equation based on a pilot study data. Regression equations are obtained by the well-known least squared method, and we find that regression lines could be formulated with only two data points, alternatively. For further studies, this works might be extended to t distributions for testing hypotheses about population mean in order to determine sample size of a prospective study. Also similar arguments could be explored for F test statistics.

• 한국인쇄학회:학술대회논문집
• /
• 한국인쇄학회 2000년도 추계학술발표회 논문집
• /
• pp.0.3-0
• /
• 2000

Gamut mapping is a technique that acts on cross-media reproduction to transform a color between devices for the purpose of enhancing the appearance or preserving the appearance of an image. Gamut mapping essentially produces color conversion error which depends the gamut mapping method, source and destination devices, and sample points for gamut modeling. For color space conversion between monitor colors and printer colors, empirical representation using sample measurements is currently widely utilized. Color samples are uniformly selected in the device space such as CMY or RGB, represented as color patches, and then measured. However, in the case of printer, these color samples are not evenly distributed inside the printer gamut and the color conversion error is increased. Accordingly, this paper introduces a equally distributed color sampling method in CIELAB space, a device-independent color space, to reduce color conversion error, and the performance is analyzed via color space conversion experiments using tetrahedral interpolation.