• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.21 no.9
• /
• pp.1689-1696
• /
• 2017

In the process of obtaining and transmitting image, there is degradation of image due to various noise, and there have been many active studies ongoing to remove the noise added on the images. This thesis has proposed a switching filter processing by the types of noise in order to remove the complex noise added on images. When the center value of local mask is damaged by AWGN based on the noise judgment, the threshold value is applied on standard deviation of local mask to process by applying different weight of weighted mask, and if the image is damaged by the salt and pepper noise, the local mask is subdivided into 4 directions, and processed by applying cubic spine interpolation in the direction with the least slat and pepper noise. Also, in order to evaluate the performance of proposed filter algorithm, the study conducted comparison among the existing methods and proposed filter using PSNR.

• Proceedings of the Korea Concrete Institute Conference
• /
• 1994.04a
• /
• pp.148-151
• /
• 1994

Up to now, sea sand without complete removal of salt is being used in the construction works because there is little satisfactory counterplan for the substitute aggregate. In the case that such sea sand is used in the reinforced concrete, the residual salt gives rise to deterioration phenmenon and iron corrosion, reducing durability of the ferro-concrete structures. The paper, an experimental study on the effect of corrosion protection by tighting concrete used SF and FA, is to investigate general steel bar's corrosion and to develop concrete using sea sand economically after it is analyzed and examinated ratio of the corrosion area affected by the autoclave cycle. As a test results, as for corrosion area ratio, it is very effective to use admixrutes such as SF and FA which decrease corrosion area remarkably with increasing the amounts of admixtures. Accordingly the use of admixtures is advantageous for tightening concrete and has an effect of salt damage prevention and rust protection in concrete used sea sand.

• Journal of Korean Society of Water and Wastewater
• /
• v.26 no.6
• /
• pp.807-813
• /
• 2012

Flocculation and flotation are used as pretreatment steps prior to the reverse osmosis (RO) process. During seawater treatment, high temperature can change the water chemistry of seawater during the process of coagulation. It also affects bubble volume concentration (BVC) and bubble characteristics. Coagulants such as alum and ferric salts at $40^{\circ}C$ can also change flux rates in the seawater reverse osmosis (SWRO) process. In this study, the bubble characteristics in dissolved air flotation (DAF), used as a SWRO pretreatment process, were studied in synthetic seawater at $20^{\circ}C$ and $40^{\circ}C$. The flux of an RO membrane was monitored after dosing the synthetic seawater with coagulants at different temperatures. Results showed that BVC increases as the operating pressure increases and as the salt concentration decreases. The bubble size released at $40^{\circ}C$ is far smaller than that at $20^{\circ}C$The addition of a ferric salt is effective for turbidity removal in synthetic seawater at $20^{\circ}C$; it is more effective than alum. When synthetic seawater was dosed with a ferric salt, the RO membrane flux increased by 27 % at $40^{\circ}C$.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.9 no.8
• /
• pp.2928-2947
• /
• 2015

Adaptive Gaussian filter (AGF) is a recently developed switching filter to remove salt and pepper noise. AGF first directly identifies pixels of gray levels 0 and 255 as noise pixels, and then only restored noise pixels using a Gaussian filter with adaptive variance based on the estimated noise density. AGF usually achieves better denoising effect in comparison with other filters. However, AGF still fails to obtain good denoising effect on images with noise-free pixels of gray levels 0 and 255, due to its severe false alarm in its noise detection stage. To alleviate this issue, a modified version of AGF is proposed in this paper. Specifically, the proposed filter first performs noise detection via an image block based noise density estimation and sequential noise density guided rectification on the noise detection result of AGF. Then, a modified Gaussian filter with adaptive variance and window size is used to restore the detected noise pixels. The proposed filter has been extensively evaluated on two representative grayscale images and the Berkeley image dataset BSDS300 with 300 images. Experimental results showed that the proposed filter achieved better denoising effect over the state-of-the-art filters, especially on images with noise-free pixels of gray levels 0 and 255.

• Journal of Ecology and Environment
• /
• v.29 no.1
• /
• pp.29-34
• /
• 2006

Three macrophytes species, that are, Phragmites australis, Zizania latifolia and Typha angustifolia were grown in mono culture in order to compare growth (relative biomass increase rate), variation of photosynthetic pigment (total chlorophyll, Chl a, Chl b and Chl a/Chl b) and effectiveness of nutriment removal in 15%o NaCl-salt solution or processed-leachate (salinity 19.6%o) from sanitary landfill sites. The relative biomass increase rate of p. australis was significantly higher than Z. latifolia and T. angustifolia. In the case of processed-leachate treatment, the relative biomass increase rates of above-part, rhizome and root of P. australiswere 178 %, 148 % and 157 %, respectively. Also, in 15%o NaCl-salt solution treatment, the relative biomass increase rates of P. australis increased as follows; 161 % (above-part), 183 % (rhizome) and 112 % (root). Total chlorophyll contents increased significantly in the leaves of P. australis and Z. latifolia grown in 15%o NaCl-salt solution and processed-leachate. Among three macrophytes, P. australis was evaluated as most effective macrophyte for the biological retreatment of processed-leachate from sanitary landfill sites.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2003.10a
• /
• pp.185-186
• /
• 2003

• Membrane Journal
• /
• v.32 no.5
• /
• pp.314-324
• /
• 2022

This study is aimed to design a membrane process that systematically removes contaminants including microplastics in sun-dried salt using a separation membrane. In this study, we selected the separation membrane material, pore size, and module suitable for the sun-dried salt fields, and proceeded with the experiments under the salt fields and laboratory conditions. A pilot plant was constructed and tested in our lab and in the actual saltern with the selected 200 kDa, 4 kDa ultrafiltration membranes, and 3 kDa nanofiltration membranes. Most of the impurities in the sea salt were 0.1 ㎛ in size, and more than 7 types of various microplastics were detected in the impurities. After that, as a result of checking the filtered water through the separation membrane process, no impurities were detected. As a result of comparing the existing sea salt component and the sea salt component prepared with separation membrane filtrate, impurities were effectively removed without change in the sea salt component.

• Applied Chemistry for Engineering
• /
• v.31 no.5
• /
• pp.575-580
• /
• 2020

In this study, we simulated an amine regeneration process with heat-stable salts removal unit. We derived the optimal operating conditions considering the flow rate of waste, the removal rate of heat-stable salts, and the loss rate of MDEA (methyl diethanolamine). In the amine regeneration process that absorbs and removes acid gas, heat-stable salt impairs the absorption efficiency of process equipment and amine solution. An ion exchange resin method is to remove heat-stable salts through neutralization by using a strong base solution such as NaOH. The acid gas removal process was established using the Radfrac model, and the equilibrium constant of the reaction was calculated using Gibbs free energy. The removed amine solution is separated and flows to the heat-stable salts remover which is modeled by using the Rstoic model with neutralization reaction. Actual operation data and simulation results were compared and verified, and also a case study was conducted by adjusting the inflow mass of removal unit followed by suggesting optimal conditions.

• KSBB Journal
• /
• v.29 no.3
• /
• pp.139-144
• /
• 2014

Microorganisms play a significant role in bioremediation of heavy metal contaminated seawater. In this study, we reported an effective removal of Cu and Zn in marine envionment by using Desulfovibrio desulfuricans (D. desulfuricans) which belong to sulfate reducing bacteria. D. desulfuricans showed stable growth characteristics in high salt concentration and had resistance to heavy metals. Cu and Zn was removed not only by physical adsorption on the surface of bacteria but also by precipitation reaction of microbial metabolism by D. desulfuricans in seawater. In case of different heavy metal concentration, Cu was effectively removed 85% at 25 ppm and 60% at 50 ppm and Zn was effectively removed 54% at 50 ppm and 46% at 200 ppm, respectively.

• KSBB Journal
• /
• v.27 no.1
• /
• pp.28-32
• /
• 2012

In this study, the treatment ability of the wastewater containing perchlorate by non-salt tolerant perchlorate reducing bacterial consortium (N-PRBC) was evaluated in a continuous stirred tank bioreactor (CSTR). To obtain the optimal operating condition the bioreactor was operated with the different wastewater empty bed retention time (EBRT). The treatment performance in the bioreactor could be maintained at 100 $mg-ClO_4{^-}L^{-1}$ up to a EBRT of 3 h, and the removal capacity in the CSTR was about 3.3 times higher than that in a batch operation. With a decrease from 9 h to 2 h in a EBRT, the volumetric perchlorate reduction rate was increased from 11.1 $mg-ClO_4{^-}L^{-1}h^{-1}$ to 50.0 $mg-ClO_4{^-}L^{-1}h^{-1}$, and the specific perchlorate reduction rates were increased from 3.01 $mg-ClO_4{^-}g-DCW^{-1}h^{-1}$. In conclusion, the treatment capacities in a CSTR were much better than those obtained in a batch operation.