• 한국항해항만학회지
• /
• 제37권6호
• /
• pp.673-680
• /
• 2013

본 연구는 요트체험 활동 참여자들의 몰입도가 만족도 및 자아존중감에 미치는 영향에 관한 것으로서 우리나라 요트문화 및 레저산업의 대중화 실현에 기초자료를 제공하는데 그 목적이 있다. 이러한 연구 목적을 달성하기 위해 부산 울산 경남지역 주민을 대상으로 해양레저 아카데미 및 해양레저 체험 프로그램에 참여한 경험이 있는 대상자 총 428명을 모집단으로 선정하여 설문조사를 실시하였으며, 자료처리 방법은 빈도분석, 신뢰도분석, 타당도분석, 단순회귀분석, 다중회귀분석을 사용하였다. 이상과 같은 연구방법 및 자료분석의 결과를 통해 도출된 결론은 다음과 같다. 첫째, 요트체험 참가자들의 몰입도는 만족도에 정적인 영향을 미치는 것으로 나타났다. 둘째, 요트체험 참가자의 몰입도는 자아존중감(일반요인, 가정요인, 직장요인, 사회요인)에 정적인 영향을 미치는 것으로 나타났다. 셋째, 요트체험 참가자의 만족도는 자아존중감(일반요인, 가정요인, 직장요인, 사회요인)에 정적인 영향을 미치는 것으로 나타났다.

• 해양환경안전학회지
• /
• 제22권2호
• /
• pp.174-180
• /
• 2016

본 연구는 여수에서 출항하여 백도와 도서문화가 살아있는 거문도를 거쳐 제주 김녕항으로 이어지는 해양관광 크루즈 세일링 요트 항로를 제안하였다. 최근 해양레저 활성화에 비례하여 안전사고도 늘어나고 있으며, 세일링 요트의 특성을 고려한 안전항로 개척은 지역별, 해역별로 조사되어야 한다. 따라서 거문도의 사례를 통해 분석해 보면 해양문화의 소개, 국제요트대회유치, 다기능항으로 개발 등이 필요하고, 특히 해당 항로의 운항패턴과 밀집도 분석 등이 추가로 도출되어야 할 것이다. 이러한 정보는 세일링 요트의 운항 안전율을 높여 지역 관광산업에 도움이 될 것이다.

• 대한조선학회논문집
• /
• 제44권3호
• /
• pp.248-257
• /
• 2007

Turbulent flows around a sailing yacht hull were calculated using CFD technique. Grid system was generated by using Gridgen package and Fluent package was used to calculate flows around a 30ft-class yacht hull designed by MOERI. The drafts at starboard and port sides of a yacht. when the hull was heeled, were determined by adjusting the same displacement in the generated grid system. Pressure distribution on the sailing yacht hull was obtained and the changes of drag and side force by heel and leeway variation were shown. The flow calculations have been carried out both with and without free surface, and keel and rudder were included for both cases. It was found that the calculated results with free surface gives better agreement with experiments than those without free surface, although there are still a room for the improvement in correct prediction of forces.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2013년도 추계학술대회 논문집
• /
• pp.753-756
• /
• 2013

The demand for sailing yacht is increasing in consonance the improvement of people's live. These yachts can be dually propelled by wind and by diesel engine power. A singing (humming, whistling) phenomenon induced on the propeller was discovered on a 55-foot catamaran sailing yacht. As a result, an increase in the structural vibration of the stern tube room and propulsion system with abnormal noise was detected due to this flow. In this study, the cause of the phenomenon is investigated and its possible countermeasures proposed.

• 대한조선학회논문집
• /
• 제43권1호
• /
• pp.32-42
• /
• 2006

This study aims at establishing a technique for sailing yachts model tests with sailing condition. It is very important to estimate a ship's potential speed performance before building a real ship. Several methods are used to estimate a ship's potential speed performance such as using parent ship data, standard vessel chart and model test. Model test is the most precise among these options. In korea. model testing is widely used with general vessels but not with sailing yachts. Because sailing yachts are propelled with heeling and leeway. using the wind. another method is needed to estimate their speed. The new model test. which is different from tests for upright general vessels, is in a great demand. In this paper. we describe a test method for the sailing yacht model test. based on Masuyama's equation of motion. And we describe choosing scale ratio. production process and materials of the model. Also. various ways of measuring instruments. attaching jigs and adjusting calibration are described so that they can be utilized as useful data for model testing.

• 대한조선학회논문집
• /
• 제47권3호
• /
• pp.321-327
• /
• 2010

During sailing by wind-driven thrust on the sail, a catamaran sailing yacht generates leeway and heeling. For estimating resistance and moment prediction of a real ship by changing of running attitude, a model test of the ship has to be carried out. This study aims at establishing experimental techniques for a catamaran sailing yacht by changed attitude during running direction. Through the model test, drag and side force of the real ship are predicted. Also through experiment, rolling and yawing moments were considered.

• 한국해양공학회지
• /
• 제31권6호
• /
• pp.419-424
• /
• 2017

Unlike other leisure boats, a sailing yacht is propelled by wind power using sails that are controlled by the crew. Therefore, the ergonomic design of the equipment that the crew has to operate for sailing might be very important. However, it is difficult to find design rules and regulations for the equipment arrangement of a sailing yacht based on ergonomics. In this study, the arrangement design for the height and side plate angle of a winch for a sailing yacht was examined from an ergonomic design point of view. In a simulation, a Korean male in his 20s was selected as a human model for a grinder. The physical load was analyzed when he was operating a winch using a 3D human simulation. The lower back load showed the highest value when using the grinder at $90^{\circ}$ and $180^{\circ}$. Based on the results for the lower back load when using the grinder with various winch heights, it is suggested that the winch height from the cockpit floor to the top of the winch should be more than 40% of the height of the human operator. In addition, according to the results for the lower back load with various horizontal distances from the body, it is suggested that the side plate angle should be less than $16^{\circ}$.

• 대한조선학회논문집
• /
• 제42권3호
• /
• pp.233-240
• /
• 2005

A model test was carried out, in order to verify the hydrodynamic performances of public 30 feet class sailing yacht. In the initial design stage, the performances and the running attitude of sail yacht including the hull form and sail plan, appendages were estimated by VPP, from which made the representative test conditions. A new experiment system such as captive model device was composed because the running attitude could be changed by wind conditions. The test results show that the minimum resistance is generated in the heeling 20 degree, which was expected in the initial design stage. It is thought to be the useful informations that the keel has au effects on hydrodynamic forces and resistance differences between the upwind and the downwind condition.

• 수산해양교육연구
• /
• 제15권1호
• /
• pp.123-133
• /
• 2003

The present investigations were carried out for the most and fundamental elements, what is called maneuverability, stability, safety, rig, sail about the world famous race, VOLVO60 and America's cup. The results obtained are summarized as follows: First, the structure of yacht should be designed with focuse on the preparation for the preparation of collision with other yachts around, with the dumps of iceberg and also whales nearby. At the same time, the accurate calculation on the each structure and equipment of yacht should be processed for the dynamic stability in the rainstorms. Second, VOLVO60, long-distance sailing, should be emphasized on the light weight and the safety, while the boat for America's cup, short-distance sailing, should be stressed on the appropriate weight of the body and the maximum speed for fast maneuverability. Third, up-to-the minute materials should be developed for the appropriate wind power and the turning of directions.

• 한국전산유체공학회지
• /
• 제19권3호
• /
• pp.1-7
• /
• 2014

One of the most important factors in sailing yacht design is an accurate velocity prediction. Velocity prediction programs (VPPs) are widely used to predict velocity of sailing yachts. VPPs, which are primarily based on experimental data and experience of long years, suffer limitations applied in realistic conditions. Thus, in the present study, a high fidelity velocity prediction method using the computational fluid dynamics (CFD) is proposed. Using the developed method, velocity and motion of a 30 feet sloop yacht, which was developed by Korea Research Institute of Ship and Ocean (KRISO) and termed KORDY30, were predicted in upwind sailing condition.