• Journal of dental hygiene science
• /
• v.12 no.4
• /
• pp.310-319
• /
• 2012

In this study, 1,495 cases of computerized data collected as disease entities of oral and maxillofacial injuries among patient visiting S university hospital located in Seoul in 2009 were analyzed and following results were obtained. It was found that the injury incidence in male was greater than in female (1.49:1), it occurred most frequently in the age of 7~14 years old (19.6%), and its most frequent cause was falling down (25.9%). Injuries occurred in other place including beach and open-air (24.7%) most frequently, often developed in anterior teeth (43.2%) and posterior teeth (43.1%), their incidence was relatively higher between 15:00~17:00 (10.4%) and 19:00~23:00 (7.1%) O'clock. In the relationship between causes of the injury and the diagnosis based on the international classification of disease), falling, fall, impingement, violence, traffic accident, sports and own making accident caused most frequently lip and oral open injuries (S01.5), open fracture of tooth (S02.51), close fracture of tooth (S02.50), close fracture of mandible (S02.60), close fracture of tooth (S02.50), respectively. From the above results, it is necessary to understand general characteristics of oral and maxillofacial injuries and to consider their trends for the establishment of systematic complement policies and for the performing safety training and public relations activities.

• Korean Security Journal
• /
• no.48
• /
• pp.147-176
• /
• 2016

Korean Peninsula is surrounded by ocean on three sides. Because of this geographical quality over 97% of export and import volumes are exchange by sea. Foreign ship and international passenger vessels carries foreign tourist and globalization and internationalization increases this trends. Leisure population grows with national income increase and interest of ocean. And accidents and incidents rates are also increases. Korea Coast Guard's jurisdiction area is 4.5 times bigger than our country. The length of coastline is 14,963km including islands. One patrol vessel is responsible for 24,068km and one coast guard substation is responsible for 94km. Efficient patrol activities can not be provided. This research focus on this problem. Analyze the status and trends of maritime crime and suggest efficient patrol activities. To deal with increasing maritime crime rate this study suggest to use geographical profile method which developed early 1900s in USA. This geographical profile analyse the spatial characteristic and mapping this result. With this result potential crime zone can be predicted. One of the result is hot spot management which gives data about habitual crime zone. In Korea National Police Agency adopt this method in 2008 and apply on patrol and crime prevention activity by analysis of different criteria. Korea National Police Agency analyse the crime rate with crime type, crime zone and potential crime zone, and hourly, regionally criteria. Korea Coast Guard need to adopt this method and apply on maritime to make maritime crime map, which shows type of crime with regional, periodical result. With this geographical profiling we can set a Criminal Point which shows the place where the crime often occurs. The Criminal Points are set with the data of numerous rates such as homicide, robbery, burglary, missing, collision which happened in ocean. Set this crime as the major crime and manage the data more thoroughly. I expect to enhance the reinforcement of marine crime using this Criminal Points. Because this points will give us efficient way to prevent the maritime crime by placing the patrol vessel where they needed most.

• Proceedings of the Korean Reliability Society Conference
• /
• 2001.06a
• /
• pp.277-278
• /
• 2001

The successful operation of a product In service depends upon the effective provision of logistic support in order to achieve and maintain the required levels of performance and customer satisfaction. Logistic support encompasses the activities and facilities required to maintain a product (hardware and software) in service. Logistic support covers maintenance, manpower and personnel, training, spares, technical documentation and packaging handling, storage and transportation and support facilities.The cost of logistic support is often a major contributor to the Life Cycle Cost (LCC) of a product and increasingly customers are making purchase decisions based on lifecycle cost rather than initial purchase price alone. Logistic support considerations can therefore have a major impact on product sales by ensuring that the product can be easily maintained at a reasonable cost and that all the necessary facilities have been provided to fully support the product in the field so that it meets the required availability. Quantification of support costs allows the manufacturer to estimate the support cost elements and evaluate possible warranty costs. This reduces risk and allows support costs to be set at competitive rates.Integrated Logistic Support (ILS) is a management method by which all the logistic support services required by a customer can be brought together in a structured way and In harmony with a product. In essence the application of ILS:- causes logistic support considerations to be integrated into product design;- develops logistic support arrangements that are consistently related to the design and to each other;- provides the necessary logistic support at the beginning and during customer use at optimum cost.The method by which ILS achieves much of the above is through the application of Logistic Support Analysis (LSA). This is a series of support analysis tasks that are performed throughout the design process in order to ensure that the product can be supported efficiently In accordance with the requirements of the customer.The successful application of ILS will result in a number of customer and supplier benefits. These should include some or all of the following:- greater product uptime;- fewer product modifications due to supportability deficiencies and hence less supplier rework;- better adherence to production schedules in process plants through reduced maintenance, better support;- lower supplier product costs;- Bower customer support costs;- better visibility of support costs;- reduced product LCC;- a better and more saleable product;- Improved safety;- increased overall customer satisfaction;- increased product purchases;- potential for purchase or upgrade of the product sooner through customer savings on support of current product.ILS should be an integral part of the total management process with an on-going improvement activity using monitoring of achieved performance to tailor existing support and influence future design activities. For many years, ILS was predominantly applied to military procurement, primarily using standards generated by the US Government Department of Defense (DoD). The military standards refer to specialized government infrastructures and are too complex for commercial application. The methods and benefits of ILS, however, have potential for much wider application in commercial and civilian use. The concept of ILS is simple and depends on a structured procedure that assures that logistic aspects are fully considered throughout the design and development phases of a product, in close cooperation with the designers. The ability to effectively support the product is given equal weight to performance and is fully considered in relation to its cost.The application of ILS provides improvements in availability, maintenance support and longterm 3ogistic cost savings. Logistic costs are significant through the life of a system and can often amount to many times the initial purchase cost of the system.This study provides guidance on the minimum activities necessary to Implement effective ILS for a wide range of commercial suppliers. The guide supplements IEC60106-4, Guide on maintainability of equipment Part 4: Section Eight maintenance and maintenance support planning, which emphasizes the maintenance aspects of the support requirements and refers to other existing standards where appropriate. The use of Reliability and Maintainability studies is also mentioned in this study, as R&M is an important interface area to ILS.

• Korean Security Journal
• /
• no.22
• /
• pp.145-168
• /
• 2010

Since Alarm Monitoring Service was introduced in Korea in 1981, the market has been increasing and is expected to increase continually. Some factors such as the increase of social security need and the change of safety consciousness, increase of persons who live alone could be affected positively on Alarm Monitoring Service industry. As Alarm Monitoring Service come into wide use, the understanding of electronic security service is spread and consumer's demand is difficult, so consideration about new developmental plan is need to respond to the change actively. Electronic security system is consist of various kinds of element, so every element could do their role equally. Alarm Monitoring Service should satisfy consumer's various needs because it is not necessary commodity, also electronic security device could be easily operated and it's appearance has to have a good design. To solve the false alarm problem, detection sensor's improvement should be considered preferentially and development of new type of sensor that operate dissimilarly to replace former sensor is needed. On the other hand, to settle the matter that occurred by response time, security company could explain the limit on Alarm Monitoring System to consumer honestly and ask for an understanding. If consumer could be joined into security activity by security agent's explanation, better security service would be provided with mutual confidence. To save response time the consideration on the introduction of GIS(Global Information System) is needed rather than GPS(Global Positioning System). Although training program for security agents is important, several benefits for security agents should be considered together. The development of new business model is required for preparation against market stagnation and the development of new commodity to secure consumer for housing service rather than commercial facility service. for the purpose of those, new commodity related to home-network system and video surveillance system could be considered, also new added service with network between security company and consumer for a basis is to be considered.

• Korean Security Journal
• /
• no.14
• /
• pp.367-388
• /
• 2007

Some of individuals working at various fields of security guard are given the legal right to use a gun to cope with expected risks and crimes. Not only in Korea but also throughout the world, a pistol is being used as a device for the workers of security guard such as the army, the police and intelligence agencies to keep the law and social order. A pistol, which is regarded as the last safety measure of security guard, is easy to carry but, because of its short barrel for high portability, its hit ratio and long-range shooting performance are much lower than ordinary guns. Despite such weak points, a pistol can be a great tool because of its high portability and if the users make steady efforts to improve their skills and, for this reason, it has been being used widely until now. National agency workers' pistol shooting skills depend on several important factors, but for the fast and accurate shooting, the mot important factor is how to aim at the target. Because it takes a relatively longer time to align the sight on the target, the change of the sight alignment method is expected to improve pistol shooting skills a lot. In Korea, however, most of national agency training centers teach the basic aiming method that crosses the foresight and the backsight and aligns the crossing to the target. That is, they teach the sight alignment method for fixed targets. Some agencies in Korea and foreign countries that have used guns more frequently and longer than us are teaching different sight alignment methods as well. Representative ones of them are aiming only with the foresight and pointing shooting. These aiming methods are expected to produce good results against moving targets. While the basic sight alignment method has to cross the foresight and the backsight and then to align the crossing to the target, so takes a longer time than other aiming methods, the other two aiming methods are expected to be effective in fields where both swiftness and accuracy are require. Because domestic agencies are teaching mainly the basic sight alignment method, the present study purposed to examine the effects of different aiming methods on shooting records and ultimately to contribute to national agency workers' operation. For this purpose, we selected 20 policemen from local police commandos under the National Police Agency who were accustomed to pistol shooting and measured their pistol shooting. According to the results, the pointed shooting method showed the best record in 5m short.range shooting. As to hit ratio in 15m shooting, which is relatively long.range for pistol shooting, the basic aiming method showed the best record, but the results of statistical analysis showed that pointed shooting is most superior. Of course, the results were obtained from a group who were used to and skillful in pistol shooting, but they are considered meaningful in that all the police and national agency workers should have such high shooting skills.

• Journal of Korean Society of Forest Science
• /
• v.87 no.2
• /
• pp.131-144
• /
• 1998

Understanding of the reasons why users in recreation settings select particular trails may provide useful information for effective recreation resources management. This study investigated the present use of the major trails in Mudeung-san Provincial Park and the major influential factors on trail selection. This study was conducted in Mudeung-san Provincial Park stretching over Hwasun-gun and Damyang-gun of Chonnam Province and Kwang-ju city during August in 1996. Data were collected through on-site survey and mail-back questionnaire. 519(44.2%) out of 1173 survey samples were used for analysis. Reasons for selecting a particular trail were classified into 8 major factors. In overall, the order of the importance degree of the factors was 1) aesthetics of landscape, 2) safety(from physical and crime), 3) conditions for health, 4) quietness, 5) familiarity, 6) on the way to the destination, 7) convenience/social, 8) others' intention. There were differences in the degree of importance of each factor depending on trails, users' characteristics(eg., gender, age, group size, visit experience, etc.) and users' behavioral patterns. Recreation motivations were classified into 5 major factors. The order of the importance degree of the factors was 1) contacting with nature, 2) self-training, 3) solitude, 4) social interaction, 5) appreciating cultural properties. Regardless of trails, 'contacting with nature' was the most important factor, and the degree of importance in the other 4 motivational factors showed only a little differences in order according to the trails. There were correlations between major factors for trail selection and recreation motivations. The results of this study may provide foundational information for establishing effective management strategies through better understanding of the present use of trails and influential factors on trail selection. It can be used for reducing the present social and ecological problems caused by use concentration on certain trails and providing users with better quality of diverse recreational experiences. This study discussed the findings, and suggested some management strategies based on these information.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.41 no.3
• /
• pp.257-265
• /
• 2014

The aim of this study was to establish the appropriate guidelines in the sedation techniques and to organize the continuing education programs for the sedation in future under the direction of Committee on Sedation, Education and Research under the Korean Academy of Pediatric Dentistry(KAPD). The surveys on the sedation technique were performed on 111 organizations which practices the sedation and responded to the survey via online and e-mail by February 2014. The collected survey were analyzed. The purpose of sedation was mainly to manage the children's behavior and its uses were primarily on 3~4 years old children. The most frequent duration of treatment was 1~2 hours to treat both maxillary and mandible. The preferred dosages of sedative drugs were chloral hydrate(CH) 50~70 mg/kg, hydorxyzine(Hx) 1~2 mg/kg, and intramuscular midazolam(Mida IM) 0.1~0.2 mg/kg. The preferred combination of the sedative drugs were CH + Hx + $N_2O/O_2$(67.6%), CH + Hx + Mida submucosal administration (SM) + $N_2O/O_2$(29.7%), and Mida IM + $N_2O/O_2$(23.4%). The administration of additional sedatives was carried out at 48%, mainly using Midazolam. 87.5% of the respondents experienced the adverse effects of the sedation such as vomiting/retching, agitation during recovery, subclinical respiratory depression, staggering, and etc. Among them, only 20% periodically retrain the emergency management protocol. About the discharge criteria for patients after the sedation, the respondents either showed a lack of clear criteria or did not follow the recommended discharge criteria. 86% of the respondents expressed the interests in taking a course on the sedation and they wanted to learn mostly about the sedation-related emergency management, the safe dosage of the sedative drugs, and etc. The use of sedation in pediatric dentistry must be consider a patient's safety as top priority and each dentist must show the evidence of sound practices for the prevention of any possible medical errors. Therefore, KAPD must establish the proper sedation guidelines and it needs to provide the systematic technical training program of sedation-related emergency management for pediatric dentists.

• Journal of Korean Home Economics Education Association
• /
• v.31 no.4
• /
• pp.1-18
• /
• 2019

The purpose of this study was to analyze the research trend in home economics education using network text analysis method. The 586 research articles published in the Journal of Home Economics Education Association between July, 2003 and December 2018 were examined using Neckinger 4, a social network analysis software. The frequency and centrality measures(degree centrality, closeness centrality, and betweenness centrality) were calculated for the words appeared throughout the whole period, and the centrality analysis and LAD(Latent Dirichlet Allocation) were conducted for the four sub-periods. The results are as follows: first, the most frequently appeared words are parents, culture, unit, health, career, consumption, practicality, etc. The words such as parents and management scored high in degree centrality; parents and male students in closeness centrality; and male students and units in betweenness centrality. Second, when divided into four periods, the words such as education, family, purpose, class, middle school, and school appeared most frequently across the periods; but some words such as 'purpose' (in period 3 and 4), or 'process' (in period 4) were salient only in certain periods. Third, the words with high centrality were consistent regardless of the types of centrality within each period. Fourth, the topic analysis using LAD showed that curriculum, textbook, family healthiness, teaching-learning, evaluation, dietary life, appearance management, and consumption were the topics consistently appeared across all periods. The topics have become diversified and deepened. New topics such as teacher training and safety appeared in later periods, possibly due to the curriculum and national policy changes, and housing as a less represented topic is suggested as an area that needs further research attention. This study has implication in that it allows researchers to identify the major research interests and the trends in research by researchers in home economic education.

• Restorative Dentistry and Endodontics
• /
• v.32 no.4
• /
• pp.385-396
• /
• 2007

The aims of this study were to compare the shaping effect and safety between single length technique recommended by manufacturer and crown-down technique using Mtwo rotary file and to present a modified method in use of Mtwo file. Sixty simulated root canal resin blocks were used. The canals were divided into three groups according to instrument and the manner of using methods. Each group had 20 specimens. Group MT was instrumented with single length technique of Mtwo, group MC was instrumented with crown-down technique of Mtwo and group PT was instrumented with crown-down technique of ProTaper. All of the rotary files used in this study were operated by an electric motor. The scanned canal images of before and after preparation were superimposed. These superimposed images were evaluated at apical 1 to 8 mm levels Angle changes were calculated. The preparation time, weight loss, instrument failure and binding, canal aberrations, and centering ratio were measured. Statistical analysis of the three experimental groups was performed with ANOVA and Duncan's multiple range tests for post-hoc comparison and Fisher's exact test was done for the frequency comparison. In total preparation time, group MT and group MC were less than group PT. In the aberrations, group MT had more elbows than those of group MC and group PT. The binding of group MC was least and group MT was less than group PT (P < 0.05). Under the condition of this study, crown-down technique using Mtwo rotary file is better and safer method than single length technique recommended by the manufacturer.

• Journal of radiological science and technology
• /
• v.28 no.1
• /
• pp.33-44
• /
• 2005

The objective of this study is to supply the good quality of experts the radiation industries in Korea and develop the major subject matter needed in the radiation industries and the curriculum in order to execute it for the variation of fields of employment at the department of radiation in the junior college and the development of the percentage of employment. In addition, this study is to improve the level of radiation experts engaged in the industries in quality, and it is to improve the social recognition of radiation rather negative now because of the development of radiation industry. As for the core results of this research, it was to suggest the detailed choice method curriculum proper to the service fields of radiation industries, but it may be subject to change due to each college's property and the educational objectives. From the result of this research above, it may be summed up as follows. First, as for the detailed curriculum by the service field, this study was to organize two subject matters: 1. the subject matter proper to the field of using the radiation, and 2. the subject matters proper to the safety control field of radiation. Second, as for the detailed curriculum by the pattern of industries, this study was to organize the four subject matters: 1. the subject matter needed in the manufactures, 2. the subject matter needed in the nondestructive testing industries, 3. the subject matter needed in the sales agencies, and 4. the subject matter needed in the laboratories. This study was to suggest the operational model about the curriculum in order to execute these subject matters. It could be executed as two methods below. First, one method is to execute the major systems by the medical field and industrial field in the third course at the department of radiation in the junior college now. Second, the other method is to make them specialize the industrial radiation in the Advanced Course(one year course) after the graduation of junior college. To operate these curricula successively it needs to assume the deeper research and the development of materials about the subject matters related to the nuclear radiation industries hereafter. In addition, it needs to solve the security of finance like the manpower of professor, space for practice, and the educational appliances, etc. needed in the operation of subject matters. Finally, the effect and result from the development or revision of college curriculum did not come out in a short time. It will require considerable time until the undergraduates at the department in the junior college finish a set of curriculum newly developed, and graduate the university, and can get the results while they engage in their works in the industrial sites. Accordingly, all the interested parties have to anticipate the results of this research with the patience in long-standing point of view. Also, this researcher considers it as it is willing to give them the continuous interest and support.