• Journal of Home Health Care Nursing
• /
• v.24 no.1
• /
• pp.14-22
• /
• 2017

Purpose: To study aimed to examine the impact of the Nursing and Care=giving Integrated Service on nursing work performance, nurse' job satisfaction, and patient safety. Methods: A total of 66 nurses were selected as participants, comprising 30 nurses working in Nursing and Care=giving Integrated Service hospital ward, and 33 nurses working in a general hospital ward with a similar patient and disease group and distributed moderately. For data analysis, t-tests, ANOVA, and $X^2$ tests were conducted. Results: Nursing work performance in the Nursing and Care=giving Integrated Service ward was higher than that in the general hospital ward, but this difference was not statistically significant. Conversely, job satisfaction was lower among nurses in the Nursing and Care=giving Integrated Service ward, although again the difference was not significant. However, the Nursing and Care=giving Integrated Service ward had a significantly lower rate of safety-related accidents in patients compared to the general hospital ward. Conclusion: In order to expand and improve patient safety and other aspects of the Nursing and Care=giving Integrated Service, there is a need to establish a mediation strategy for increasing nurses' work performance and job satisfaction.

• Journal of the East Asian Society of Dietary Life
• /
• v.21 no.3
• /
• pp.401-417
• /
• 2011

The purpose of this study was to investigate consumer concerns about hazardous elements on foods and recognition of the roles of government, food producers, and consumers in securing food safety. The data were collected from the 443 adult consumers living in Seoul, Busan, Daegu, Incheon, Kwangju and Daejeon through a self-administered questionnaire. Frequencies, t tests, analysis of variance and Duncan's multiple range tests were conducted using SPSS Windows. The results of the survey were as follows: (1) the respondents were worried about health risks related to hazardous elements on foods, (2) many respondents were more worried about preservatives of imported foods than those of domestic foods, and (3) most respondents mentioned that observance of enforcement regulations by producers was the most important factor for ensuring food safety in the future. These results imply that regulations regarding the safety of imported foods should be increased.

• Journal of the East Asian Society of Dietary Life
• /
• v.22 no.2
• /
• pp.305-314
• /
• 2012

This study examined awareness and information acquisition behavior regarding food hygiene and safety and information search behavior of college students. The sample was obtained from 284 students in Yeungnam region through a self-administered questionnaire. To describe characteristics of the respondents, frequency distributions were used. In addition, $t$ tests, analysis of variance and Duncan multiple range tests were conducted. Data were analyzed by SPSS Windows V.18.0. The results of the study were as follows: (1) most respondents were concerned about food hygiene and safety. They were mostly interested in the expiration date label on breads, milk/dairy products, fish products and meat products, and price of cookies. Many respondents answered that foods produced and distributed in Korea were not safe. The respondents were most worried about endocrine disruptors among various food risk factors. The respondents received information on food hygiene and safety from blogs, mini-homepages, or Kin-searches on the Internet, electronic media, and food labeling in decreasing order.

• Nuclear Engineering and Technology
• /
• v.53 no.3
• /
• pp.776-792
• /
• 2021

Conventional integral effect test facilities were constructed to enable the precise observation of thermal-hydraulic phenomena and reactor behaviors under postulated accident conditions to prove reactor safety. Although these facilities improved the understanding of thermal-hydraulic phenomena and reactor safety, applications of new technologies and their performance tests have been limited owing to the cost and large scale of the facilities. Various nuclear technologies converging 4th industrial revolution technologies such as artificial intelligence, drone, and 3D printing, are being developed to improve plant management strategies. Additionally, new conceptual passive safety systems are being developed to enhance reactor safety. A new integral effect test facility having a noticeable scaling ratio, i.e., the (UNIST reactor innovation loop (URI-LO), is designed and constructed to improve the technical quality of these technologies by performance and feasibility tests. In particular, the URI-LO, which is constructed using a transparent material, enables better visualization and provides physical insights on multidimensional phenomena inside the reactor system. The facility design based on three-level approach is qualitatively validated with preliminary analyses, and its functionality as a test facility is confirmed through a series of experiments. The design feature, design validation, functionality test, and future utilization of the URI-LO are introduced.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.25 no.3
• /
• pp.129-135
• /
• 2021

After the manual shutdown of the Wolseong nuclear power plant due to an earthquake in Gyeongju in 2016, anxiety about the earthquake safety of nuclear power plants has become a major social issue. The shear wall structure used as a major structural element in nuclear power plants is widely used as a major structural member because of its high resistance to horizontal loads such as earthquakes. However, due to the complexity of the structure, it is challenging to predict the dynamic characteristics of the structure. In this study, a three-story shear wall structure is fabricated, and the in-structure response characteristics of the shear wall structure are evaluated through shaking table tests. The test is performed using the Gyeongju earthquake that occurred in 2016, and the response characteristics due to the domestic earthquake are evaluated.

• Journal of the FoodService Safety
• /
• v.1 no.1
• /
• pp.19-25
• /
• 2020

A reduced salt, dry-type bulgogi bibimbap with AF-343 was prepared, and the acceptance, antioxidant antimicrobiological safety were investigated. The acceptance of the reduced salt and the AF-343 added sample, RW, showed the highest value of 5.37 among the samples, but it did not differ significantly from the other samples of the standard sample group. The acceptances of the appearance, aroma, texture, and overall acceptance were not significantly different in all samples (p>0.05). In the DPPH radical scavenging activity, the values of SW and RW with the AF-343 were 15.05 and 14.77, respectively, which were significantly higher than the 9.57 and 10.42 obtained for SWO and RWO without AF-343, respectively (p<0.05). Pathogenic microorganisms tests that were either negative or not detected in any of the samples representing hygiene safety were met in the dried bibimbap against Escherichia coli, pathogenic microorganisms, and general bacteriological tests. The aerobic plate counts were 30.0 CFU/g, indicating that the dry type salt-reduced bibimbap containing AF-343 was within the safety range that meets the safety standards of microorganisms in the food code for commercialization. Therefore, high-quality dry-type reduced salt bibimbap with AF-343 is helpful for antioxidant action and effective for skin moisturizing and can be produced without affecting the taste and palatability.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• v.y2005m4
• /
• pp.99-105
• /
• 2005

To evaluate structural safety factor of the jet vane for the thrust deflection system under the dynamic pressure and very high temperature($2700^{\circ}C$) of the combustion gas flow, the high temperature tension tests of refractory metals and 3-D nonlinear numerical simulations are performed. Through the analysis of high temperature structural behavior for jet vane, the structural safety of jet vane is evaluated, and numerical results are compared with static pound tests of jet vanes. It has been found that most of structural and thermal loading is concentrated on the vane shaft which worked as safe under $1400^{\circ}C$. From the comparison of static ground tests and numerical results, the evaluation criterion using the vane load and shaft displacement is more useful to estimate the structural safety than using the equivalent stress.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.9 no.3
• /
• pp.18-24
• /
• 2005

To evaluate structural safety factor of the jet vane for the thrust deflection system under the dynamic pressure and very high temperature(2700$^{\circ}C$ ) of the combustion gas flow, the high temperature tension tests of refractory metals and 3-D nonlinear numerical simulations are performed. Through the analysis of high temperature structure behavior for jet vane, the structure safety of jet vane is evaluated, and numerical results are compared with static ground tests of jet vanes. It has been found that most of structural and thermal loading is concentrated on the vane shaft which worked as safe under 1400$^{\circ}C$. From the comparison of static ground tests and numerical results, the evaluation criterion using the vane load and shaft displacement is more useful to estimate the structural safety than using the equivalent stress.

• Nuclear Engineering and Technology
• /
• v.43 no.3
• /
• pp.257-270
• /
• 2011

A set of reflood tests has been performed using ATLAS, which is a thermal-hydraulic integral effect test facility for the pressurized water reactors of APR1400 and OPR1000. Several important phenomena were observed during the ATLAS LBLOCA reflood tests, including core quenching, down-comer boiling, ECC bypass, and steam binding. The present paper discusses those four topics based on the LB-CL-11 test, which is a best-estimate simulation of the LBLOCA reflood phase for APR1400 using ATLAS. Both homogeneous bottom quenching and inhomogeneous top quenching were observed for a uniform radial power profile during the LB-CL-11 test. From the observation of the down-comer boiling phenomena during the LB-CL-11 test, it was found that the measured void fraction in the lower down-comer region was relatively smaller than that estimated from the RELAP5 code, which predicted an unrealistically higher void generation and magnified the downcomer boiling effect for APR1400. The direct ECC bypass was the dominant ECC bypass mechanism throughout the test even though sweep-out occurred during the earlier period. The ECC bypass fractions were between 0.2 and 0.6 during the later test period. The steam binding phenomena was observed, and its effect on the collapsed water levels of the core and down-comer was discussed.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.15 no.6
• /
• pp.147-155
• /
• 2011

The bridges where serious damages, defects, material degradations, etc. are not found can be presumed to have enough safety for the specified design loads, nevertheless, in many cases the loading carrying capacity is rated through loading tests. The safety specifications and manuals get no further than qualitative instructions for performing loading test or not. Some studies presented the improved appraisal methods for determining the load carrying capacity; however, the feasibility studies for loading test are scarcely carried out. This study examines an existing question, whether the loading tests are necessarily required in the safety assessment or not, and suggests an alternative for that via a statistical analysis for dozens of condition evaluation reports for concrete bridges.