• 한국안전학회지
• /
• 제24권6호
• /
• pp.136-143
• /
• 2009

The injuries as a result of fall accidents is the one of the most common kind of injuries in Korea, especially fall from height is the top most common kind for fatal injuries. Futhermore, the number of fall injuries in manufacturing industry has been steadily increasing from 2000 to 2007. In 2007 the number of fall fatal injuries increased 10.6 % in comparison with the number in 2006. These numbers are 6~17 times higher than those for foreign countries such as the U.K and the USA. So, it is needed to make a study to reduce these numbers for manufacturing industry. To get the goals, we did research as followings. First, this study analyzed statistics by industry, by fall height, by common agent and so on to gain an insight into real aspect of fall injuries. It showed that ladder is the commonly cited agent for manufacturing industry, and 3 risky activities ; the ladder work, the load/unload work, and the maintenance work. Secondly, this study made a survey of manufacturing workers for their understandings of the most 3 risky activities. It showed that 'tendency to work easily' and 'difficulty of applying measures due to inherent working conditions' are main reasons for workers not to implement the preventive measures against the fall accidents. Thirdly, this study tested the slip characteristics of ladder base and lungs. The tests were done based on ANSI standard and KS. In addition to the standard condition, this study performed slip tests in wet and sandy conditions and compared the results with the those of standard condition. It showed that friction coefficient is standard condition > wet condition > sandy condition, and the friction coefficient of ladder for sandy condition is measured to be reduced by 63.9% compared with that for standard condition. Finally, this study developed safety work models for using of portable ladders in consideration of the safety standards of foreign countries such as the U.K, the USA, and the Australia.

• 대한조선학회논문집
• /
• 제59권5호
• /
• pp.323-329
• /
• 2022

This paper suggests an example guideline of a safety zone layout for the domestic LNG Truck-To-Ship (TTS) bunkering. The safety zone is one of the controlled area in LNG bunkering and its layout is required as a fundamental safety barrier. While the international standard provides a layout methodology of the safety zone, its detail application is not user-friendly and only possible with a level of the process engineering. In the domestic case, the enforcement regulations are applied for LNG bunkering but the safety zone is not properly defined for TTS operation. Considerations are made for the intuitive approach of the safety zone layout and an example guideline is suggested for application in the domestic TTS bunkering. A technical background of the guideline is described and its applicability is demonstrated with regard to the characteristics of TTS bunkering. The findings of the study are summarized in association with a practical layout of the safety zone, contributing to the safety culture in the domestic LNG bunkering.

• 대한안전경영과학회지
• /
• 제5권2호
• /
• pp.129-143
• /
• 2003

Bsusiness-to- Business transactions requires interactions between diverse application s and business. This gives rise to the need to for a common standard and protocol for exchanging busienss messages. and RosettaNet is the leading industry organization focused on developing B2B process standard for a global supply chain. This paper is intended as an investigation of Build-up Method of SCM Connection applying EC Standard(Rossetta-net) to reduce the integration effort, and improve extensibility and interoperability of an eBusiness infrastructure.-Intiative way for E-commerce applications to quickly incorporate new standards. Supply Chain Management (SCM) helps companies plan and execute supply to meet customer demand. The researches of modem scientists have thrown new light on the subject. but, The study of SCM for EC Standard has been strangely neglected by critics. Consequently, existing SCM system, which require to introduce the functions of EC, needs to be changed. Let me summarize the main points that have been made in this paper. The sharing information for connection and the Rosetta-net standard of the existing SCM system, and PIP 3A4, order management module, of the Rosetta-net specifications for connection by the Rosetta-net. Lastly, That shows the process of the gateway for connecting among the existing SCM systems. This provides felxibility in incorporating any new emerging open standard.

• 대한안전경영과학회지
• /
• 제13권1호
• /
• pp.189-193
• /
• 2011

The current standard cost for recycling applied under the Extended Producer Responsibility(EPR) institution, is not coping with continuously increased number of obligatory subject items as well as a variety of variable cost changing factors regarding the recycling treatment cost caused by price fluctuation such as increased material and labor cost entirely across the society; changes in recycling treatment process following the developing technologies; and changes in the required work forces and equipments followed by the trends of automated facilities. Despite such various cost fluctuation factors, the current EPR is not coping with the trends, making the re-calculation process difficult, which causes differences between the real treatment cost for recycling. In this study, the analysis was made on main factors affecting on the related cost and the related price changing index was calculated, by conducting the influence evaluation on the standard cost factors of the current standard cost for recycling. Through theses results, more objective standard will be set for the re-calculation of standard cost for recycling to greatly contribute to setting up the midterm and long-term strategies in the future towards efficient institution.

• 대한안전경영과학회지
• /
• 제13권3호
• /
• pp.153-168
• /
• 2011

In medium and small firm, the management system which is simple and where there is a practicality is required Ill)re than the management system which is complicated and minute of the centered around large company so that the introduction of the standard costs can be activated and it can be usefully used as a tool of management decisions. A difference between the standard costs introduction plan proposed in this paper and the preexistance study literature are as follows. In this paper, by breaking from the whole cost accounting aiming at all item, that is the traditional introduction method, and presenting the product cost accounting method by group the standards setting object was minimized and simplified. In this way, if the standards setting object is simplified, it is quick at the perimeter environment change as the little man power and flexibly it corresponds to and the cost information calculation which is exact with the setting up and maintenance of the efficient cost standard becomes available. As a result of applying for real through S corp., the usability of the method that the standard costs introduction method proposed in this paper produced the standard costs relatively short within period, it manages was verified. And the standard costs introduction method proposed in this paper went by the various cost information for each products, the management class did the management will decision which was objective and reasonable in the putting first.

• 조명전기설비학회논문지
• /
• 제21권4호
• /
• pp.88-95
• /
• 2007

Korea is highly dependent on foreign countries for energy while at the same time having a high energy-consumption industrial structure. Therefore, logical improvements in energy use efficiency and nationwide energy saving are becoming more and more important in coping with the worldwidehigh oil prices and environmental issues such as listed in the Kyoto Protocol to the United Nations Framework Convention on Climate Change. Consequently, a study was conducted on the average annual load factor in domestic areas to set a reasonable and reliable technology standard plan for high-efficiency transformers. The average annual load factor in Korea was discovered to be 18.4[%] classified by industry. This factor is expected to be used in arranging a domestic standard for a minimum efficiency system for transformers, and in reviewing and supplementing the standard transformers plan for the High Energy-Efficiency Appliance Certification. The expected effect from the establishment of the technology standards plan for highly efficient transformers is the expansion of the manufacturing and distribution of highly efficient transformers that are suitable for domestic use. These will lead to electricity cost savings for users, strengthening the related industries' market competitive powers and the effective reduction of greenhouse gases on a national level by drastically reducing loss from transformers, which accounts for a large portion of the total electric supply losses.

• 한국가스학회지
• /
• 제24권2호
• /
• pp.29-35
• /
• 2020

화학사고의 예방 및 대응을 위한 화학물질관리법이 2015년 전부 개정되었다. 이를 계기로 유해화학물질 취급시설의 설치 및 관리기준도 상당히 강화되었다. 하지만, 일부 기존시설의 경우 시설기준 준수가 어려운 쉽지 않은 경우가 발생하지만 일괄적으로 적용되고 있어 산업계에서는 어려움을 호소하고 있는 실정이다. 본 연구에서는 이러한 최근 2년(2017-2018)간 취급시설 중 민원(1,087건)이 가장 많았던(2017:117건, 2018:83건) 방류벽에 대한 선행연구, Flacs 시뮬레이션, 국내·외 기준, 만족도 조사 등을 통해 보다 합리적인 방안을 마련하고자 하였다. 이에 현재 가동 중인 기존시설에 한하여 방류벽의 설치 목적을 고려하여 화학물질 유·누출을 신속하게 감지할 수 있고 신뢰성을 높이기 위해 감지기를 추가로 설치하거나 상시 모니터링이 가능한 폐쇄회로텔레비전(CCTV)을 추가로 설치·운영하는 경우 추가 대체방안으로 인정하였다. 이는 부지를 확보하기 힘들거나, 공사비용 등 경제적인 문제로 법적인 규제를 이행하지 못하는 영세사업장 또는 중소기업의 안전측면과 비용적인 측면에 도움이 될 것이다.

• 한국가스학회:학술대회논문집
• /
• 한국가스학회 2007년도 춘계학술발표회 논문집
• /
• pp.201-205
• /
• 2007

• 비파괴검사학회지
• /
• 제28권3호
• /
• pp.273-278
• /
• 2008

In this paper, effects of thermoelastic stress by using lock-in thermography was measured in the cantilever beam. In experiment, a circular holed plate was applied to analyze variation of transient stress under the condition of repeated cyclic loading. And the finite element modal analysis as computational work was performed. According to the surface temperature obtained from infrared thermography, the stress of the nearby hole was predicted based on thermoelastic equation. As results, each stress distributions between 2nd and 3rd vibration mode were qualitatively and quantitatively investigated, respectively. Also, dynamic stress concentration factors according to the change of vibration amplitude were estimated for the resonance frequency.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2005년도 춘계 학술발표회 논문집
• /
• pp.759-764
• /
• 2005

With the tunnel to case of the construction slope it executes the periodic maintenance due to an objectivity standard. But, the standard connected with construction slope is not integrated with the important public paper organic enemy and it is duplicated and the standards which conflict are being scattered. Also, it is referred to some specifications simply and the feature which is diffuse appears. Therefore, there is a necessity which it investigates the problem point of the maintenance civil official and it improves rationally and it takes a triangular position a confusedly be standard system. In this research which it sees accomplished the fundamental research against the inspection item classified by reinforcement method for the construction slope maintenance.