• Journal of the Korea Safety Management & Science
• /
• v.24 no.3
• /
• pp.15-21
• /
• 2022

This study examined the certification effects of safety and health management system (SHMS) on the establishment level of SHMS and accident statistics in construction industry. This study obtained the establishment level of SHMS for 106 construction companies surveyed from our previous study. In addition, three major accident statistics (mortality rate, accidental mortality rate, and injury rate) for the companies were collected from the database in Korean Occupational Safety and Health Agency. The statistical analysis results revealed that the establishment level for SHMS certified companies was significantly higher than those for uncertified or certification preparing companies. Furthermore, SHMS certified companies showed significantly smaller accident statistics compared to uncertified or certification preparing companies. The results of this study support the positive effects of SHMS on reducing major industrial accidents in construction companies.

• Journal of the Korean Society of Safety
• /
• v.21 no.4 s.76
• /
• pp.102-107
• /
• 2006

Construction accidents have not decreased in spite of much effort such as new work methods, education and research related to safety works. Specially, many fatal accidents happened in construction works which involve the apartment, building, school, church, hotel, hospital, bank work and the other works. These accidents are mainly caused by unanticipated risk factors. From these reasons, this study researched fatal accidents which happened in construction works during last 13 years($1992{\sim}2004$) and analyzed the input workers and a work period of construction work. According to the input workers and a work period, the results are as following. During 13years($1992{\sim}2004$), the fatal accidents, related to the construction work, were happened to the 1,977 cases. These results were occupied the 21.32% of the total industry accidents. According to the result of the construction, the fatal accident rate of a concrete form work was the highest rate of 16.24% (321 cases) and a temporary work, a steel frame work was the each rate of 12.39%(245 cases), 10.07%(199 cases). Comparing to other work types, the fatal accident rate of those three work types(concrete form work, temporary work, steel work) was represented highly. We surveyed input workers and work period of construction work site. From the result of survey, input workers of a concrete form work were occupied with 13,720. The risk rate of the work type, which was considered input workers and work period, was represented 0.3622(a steel frame work), 0.1142(a temporary work), 0.0782(a tower crane) and 0.0772(a concrete work).

• Journal of the Korean Society of Safety
• /
• v.35 no.5
• /
• pp.59-65
• /
• 2020

For monitoring the status of industrial accidents, many statistical indexes have been developed and applied such as fatal rate, frequency rate, and severity rate. These accident indexes are measured by frequency and loss time according to the accidents in the individual industry level. However, it is less considered to use the index of identifying the industrial concentration of accidents in the holistic view. Thus, this study aims to suggest the accident concentration level among domestic industries through index analysis. The concentration level of industrial accidents is calculated by the accident composition of sub-industries. This concentration level shows whether an industry is comprised of a few sub-industries generating more accidents or an industry consists of sub-industries having the similar number of accidents. To this end, the concentration rate (CR) and concentration index (CI) are proposed to take a look at the industry composition of accidents by embracing the concept of market concentration indexes such as Hirschman-Herfindahl Index. As for the case study, four industries of mining, manufacturing, transportation, and other business (usually service) are analyzed in terms of indexes of accident rate, death(fatality) rate, and CR and CI of accident and death. Finally, we illustrate the positioning map that the accident concentration level is compared with the traditional accident frequency level among industries.

• Korean Journal of Clinical Pharmacy
• /
• v.21 no.2
• /
• pp.66-73
• /
• 2011

The objective of this study was to evaluate the recognition and performance rates about the safety rules on hazardous drugs among the selected pharmacists. The 160 pharmacists working in 4 general hospitals and in the other 4 institutions specialized in the oncology division were surveyed through mail. Among the 137 respondents to the survey (response rate 85.6%), 111 pharmacists (81%) had recognized the terms of 'hazardous drugs'. In categories of vaccines and hormones, the degrees of the recognition rate were much lower than the cytotoxic medications. It was surveyed that the degree of recognition and performance of safety rules on injectable drugs were higher than the disposal and noninjectable medications. The higher recognition rate of the safety rules made the higher degree of performance. These results were expected to provide the incentive for guidelines on handling hazardous drugs based on Korean healthcare system.

• Safety and Health at Work
• /
• v.11 no.3
• /
• pp.266-274
• /
• 2020

Background: From only frequency rate of industrial accidents, it is difficult to define the industry composition of accident statistics in a nation. This study aims to propose and develop a new index for measuring the degree of concentration of industrial accidents using the concept of the Herfindahl-Hirschman Index in the case of European countries. Methods: Using the concept of the Herfindahl-Hirschman Index, the concentration index of accidents in the country is developed, and the conditions of European countries are compared using indexes of frequency rate and concentration ratio. Results: The frequency rate and concentration ratio of fatal and nonfatal accidents in European countries are compared. According to the economic condition and geographical position, different patterns of accidents concentration are presented in terms of frequency rate and concentration ratio. Conclusion: We develop the concentration index of industrial and occupational accidents that identifies the industrial ratio of accident occurrence, and the differentiated strategy can be formulated such as approaches to reducing frequency and prioritizing target industries.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.57 no.1
• /
• pp.1-9
• /
• 2015

In this study it was adopted on sea dike monitoring that the safety monitoring with statistical limits which was adapted usually on safety monitoring by measuring pressures, stresses or deformations. And also the hydraulic head loss rate change according to passage of time was calculated for the purpose of safety monitoring. Safety monitoring by setting the statistical limit on the measured pore water pressure graphs need to be supplemented with an additional method of monitoring because the difference between the rise and fall of the tide was irregular. Safety monitoring by the limits set from values predicted by linear regression and standard errors on the hydraulic head loss graph was not affected by irregularity of tide. But if the condition of an embankment is changed gradually and slowly, it will not be detected on the hydraulic head loss graph. The graph of hydraulic head loss rate for every 24 hours vs date showed clearly that the sea water blocking state was getting better or not even though it was changed gradually and slowly.

• Korean Journal of Health Education and Promotion
• /
• v.19 no.1
• /
• pp.1-15
• /
• 2002

In this study, it is aimed to clarify the status of safety accident and safety health education and risk factors on safety accidents among the selected high school students. The study is accomplished by the survey which includes a total of 558 students sampled from the six high school. The survey took for 10 days from the date of 3th July 2000 to 13th July 2000 and the results were as follows; 1. The rate of experience of safety health education during last one year was 26.4% and the rate of accident during last one month was 20.6%. 2. The risk factors of safety accident during last one year were understanding degree of safety health education(R.R.=2.81), experience of smoking(R.R.=2.55), educational level of mother (R.R=l.63) From the results of this study, we are to propose as follow; Because the purpose of safety health education is the practice, it is important to induce changing the recognition and behavior. Therefore the government have to build up experience place, to bring up professional teacher of safety health education. It need to develope a reference of each subject and to utilize various media. Especially it need to take of education comprehensive health and environmental inducing safety health subject.

• Nuclear Engineering and Technology
• /
• v.49 no.8
• /
• pp.1617-1628
• /
• 2017

In the passive residual heat removal system of a molten salt reactor, one of the residual heat removal methods is to use the thimble-type heat transfer elements of the drain salt tank to remove the residual heat of fuel salts. An experimental loop is designed and built with a single heat transfer element to analyze the heat transfer and flow characteristics. In this research, the influence of the size of a three-layer thimble-type heat transfer element on the heat transfer rate is analyzed. Two methods are used to obtain the heat transfer rate, and a difference of results between methods is approximately 5%. The gas gap width between the thimble and the bayonet has a large effect on the heat transfer rate. As the gas gap width increases from 1.0 mm to 11.0 mm, the heat transfer rate decreases from 5.2 kW to 1.6 kW. In addition, a natural circulation startup process is described in this paper. Finally, flashing natural circulation instability has been observed in this thimble-type heat transfer element.

• Journal of the Korean Society of Safety
• /
• v.26 no.1
• /
• pp.21-26
• /
• 2011

Extinction and ignition characteristics of $CH_4$-air counterflow diffusion flame were numerically investigated using a Flame-Controlling Method(FCM). A skeletal reaction mechanism, which adopts 17 species and 58 reactions, was used in the simulation. The extinction and ignition conditions of the $CH_4$-air diffusion flames were investigated with varying the global strain rate. Upper and middle branches of S-curve for the peak temperature in the inverse of the global strain rate space were obtained with the FCM. The structures of diffusion flames in the upper and middle branches of S-curve were compared. It was found that the global strain rate was not correlated with the local strain rate well in the low global strain rate region. It is expected that the FCM is very useful to obtaining the extinction and ignition condition of diffusion flame, such as fires.

• Journal of the Korean Society of Safety
• /
• v.32 no.5
• /
• pp.41-46
• /
• 2017

The coefficient of derailment and the rate of wheel load reduction were used as the index of train running safety that was directly affected the train derailment safety. In aspects of track, the train running safety depends on the complex interaction between wheel and rail, and the track-vehicle conditions (i.e., the curvature, cant, track system, vehicle speed and the operation conditions, etc). In this study, the relationship between the train running safety and the track curvature and vehicle speed for direct fixation concrete tracks currently employed in Korean light rapid transit was assessed by performing field tests using actual vehicles running along the service lines. The measured dynamic wheel load, lateral wheel load and lateral displacement of rail head were measured for same train running on four tested tracks under real conditions, which included curved and tangent tracks placed on the tunnel and bridge, thus increasing the train speed by approximately maximum design speed of each test site. Therefore, the measured dynamic track response was applied to the running safety analysis in order to evaluate the coefficient of derailment, the rate of wheel load reduction and the track gauge widening at each test site, and compare with the corresponding Korean train running safety standard. As the results, the lateral track response of direct fixation concrete track appeared to increase with the decreased track curvature; therefore, it was inferred that the track curvature directly affected the train running safety.