• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2012년도 춘계학술대회 논문집
• /
• pp.459-460
• /
• 2012

• 대한안전경영과학회지
• /
• 제5권4호
• /
• pp.187-194
• /
• 2003

The purpose of a man-machine chart is improved utilization of a man or a machine. Improved utilization can mean less idle time, rebalanced idle time, or less idle time of an excessive component. In this study we improved the productivity of the assembly line in the electronics company using man-machine chart. The results are applicable for improving the effectiveness of line balancing problems in the electronics industry.

• 대한안전경영과학회:학술대회논문집
• /
• 대한안전경영과학회 2000년도 춘계학술대회
• /
• pp.97-110
• /
• 2000

Production schedule and realization quantity of Large type bus [929(HD), 928, 928-A(SD), 937E/L, 937/L,] were analyzed in order to intruoduce FMS(Flexible Manufacturing System) appropriate for varities of customer desire and multi-item, small lot production. And this paper is aimed to propose introduction method of FMS, analyzing zig tools change times and idle times with production line and workers as an object. According to analysis results, only simple spec., depending on bus type, changed with decrease in production. For 929(HD), 928,928-A(SD), 937Eh, 937/L bus type, there was no harmony between schdule and realization. Therefore, it caused many difficulties in part supply. And there was loss of manpower and reduction of productibility due to idle time of process with bus type change. Production processes were operated inefficiently because tact time exceeded or shortaged of allow time.

• 한국컴퓨터정보학회논문지
• /
• 제26권10호
• /
• pp.167-172
• /
• 2021

세월호 사고 이후 해양안전에 대한 국민적인 관심이 높아졌지만 해양레저관광인구가 증가됨에 따라 해양사고로 인한 인명피해가 갈수록 증가되는 추세이 있어 해양안전교육이 시급한 실정이다. 그러나 해양안전교육관련 시설이 지리적으로 우리나라 서쪽에 편향이 되어 있어 교육에 있어 지역적 불균형이 심각한 상황이다. 따라서 본 연구는 우리나라 동남권 특히, 부산에 위치한 한국해양수산연수원의 유휴시설을 해양안전교육센터로 활용하여 지역적 교육 불균형을 해소하고 교육콘텐츠 개발 방안과 예산과 전문인력 확보에 따른 문제점에 관하여 해결방안을 제시하였다. 또한 중력모형을 활용하여 수요추정한 결과 연간 15만명에서 13만명에 이를것으로 추정되었다. 본 연구는 객관적인 검증방법을 활용하여 기존 유휴부지를 해양안전교육센터로서 활용하는 정책적 제언에 관하여 충분한 사회정책적 타당성을 입증하였으며 향후 정책추진에 실질적 기여를 할 수 있을 것으로 기대된다.

• 한국안전학회지
• /
• 제12권3호
• /
• pp.17-22
• /
• 1997

This paper reals with the structure and function of duel mass flywheel. Damping effects of engine rotational fluctuation are compared with those of pre-damper clutch and duel mass flywheel and driven- system behavior is estimated engine idle r.p.m. The reason of gear rattle noise is higher in summer than winter and driving longer period than initial driving is due to affection by drag torque changing. The above-contents can be used on the design of clutch system and transmission matching including engine and duel mass flywheel.

• 한국자동차공학회논문집
• /
• 제22권1호
• /
• pp.1-7
• /
• 2014

In the most of a nation, the safety and emission gas inspection system of a vehicle in service have been conducted with the most compatible inspection system according to its real environmental situation. Especially, the state of vehicle emission gas is measured by advanced emission gas inspection equipment. It has the problem that the decrease effect of an environmental pollution matter is not calculated by weight percent measurement type equipment. Therefore, in this study, the correlations for the results of emission gas measurement are analyzed by comparing a weight percent measurement type (IDLE+ASM2525 mode) and an advanced mass measurement type (IM240 mode). As the result, the selectivity of an emission gas by IM240 mode is higher than that by IDLE+ASM2525 mode. In the future, therefore, the introduction of IM240 mode and a mass measurement type equipment are necessary. Also, we need to prepare a vehicle emission gas inspection system for introducing IM240 mode.

• 대한안전경영과학회지
• /
• 제23권3호
• /
• pp.27-33
• /
• 2021

The purpose of this study is to present a novel indicator for analyzing machine failure based on its idle time and productivity. Existing machine repair plan was limited to machine experts from its manufacturing industries. This study evaluates the repair status of machines and extracts machines that need improvement. In this study, F-RPN was calculated using the etching process data provided by the 2018 PHM Data Challenge. Each S(S: Severity), O(O: Occurence), D(D: Detection) is divided into the idle time of the machine, the number of fault data, and the failure rate, respectively. The repair status of machine is quantified through the F-RPN calculated by multiplying S, O, and D. This study conducts a case study of machine in a semiconductor etching process. The process capability index has the disadvantage of not being able to divide the values outside the range. The performance of this index declines when the manufacturing process is under control, hereby introducing F-RPN to evaluate machine status that are difficult to distinguish by process capability index.

• 대한안전경영과학회지
• /
• 제4권3호
• /
• pp.13-23
• /
• 2002

The use of industrial robots has been one of the most important innovations in production technology in recent years. It is true that robotic techniques, as applied to hazardous operation in industry, have reduced the risk of injury and occupational disease among workers. However, new types of occupational safety and health risks, associated with unpredictable motion patterns and erratic idle times and serious injuries and deaths have occurred due to operator misperception of these robot design and performance characteristics. This paper provides an overview of ergonomic and safety issues which are important in the design of robotic workspaces. Particularly, this study uses MORT(Management oversight and risk tree analysis)as the system's safety technique applied to robotics.

• 자동차안전학회지
• /
• 제11권1호
• /
• pp.48-54
• /
• 2019

Optimal engine control is needed to cope with the global environmental regulations that are globally enforced. For optimum engine control, the electronic throttle control system (ETCS) is a prerequisite. Automotive makers are having an effect on reducing emissions and improving fuel economy by applying ETCS which is designed to secure stability. The ETCS controls the output of the throttle valve by passing the output value of the accelerator position sensor (APS) to the engine control unit (ECU). In this study, the authors investigated the safety standards of domestic and overseas accelerator control system and tried to understand how the air flow control affects the engine output by replacing the throttle. The authors suggest an improvement proposal of safety standard based on the result of driving evaluation by various modes.

• International Journal of Railway
• /
• 제5권1호
• /
• pp.22-28
• /
• 2012

This report is devoted to the problems of Mongolian Railway Transportation Safety such as high length of wagon service life, defects due to the more factors of exploitation, idle time, increase of faults, poor condition of repairing shops and more hand and mechanical operations and these conditions are quite difficult to meet the safety and reliability of increasing transportation from day to day. The paper discusses that the most optimum solution is diagnosing before occurring wear, breakdown, and defects on the basis of studying characteristics of structural material breakdown, residual methods of voltage, effects of material hardness and linear defects of a crystal net and the reform of machines is very important to implement it. It focuses the structures, characteristics of the material transportation and tests and analyses of the wagon cart which has to meet the traffic safety of wagons and slow and soft movement. The study is done on the wagon chassis which has to meet the traffic safety of luggage wagons.