• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.38 no.6
• /
• pp.879-885
• /
• 2018

The highway weaving section is a point where there is a conflict caused by entry and exit vehicles. In order to minimize the impact on the main line, an accumulation line should be installed. The design speed of the collecting part is 50 km/h, but the actual driver does not have proper deceleration according to the design speed. In this study, considering the driving behaviors, the design specification, and the driver 's viewing angle, the appropriate separation distance for safe entry and exit of collecting, connecting, and collecting roads was examined. As a result of the analysis, it is found that a distance of 60m is required from the point where the merging starts. The results of this study are expected to contribute to the improvement of driver safety due to the conflict between entry and exit vehicles when applied to the weaving section where collecting roads are installed.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.30 no.5D
• /
• pp.443-451
• /
• 2010

This paper proposes the methodology about advisory safety speed based on real-time vehicular data collected from highway. The proposed model is useful information to drivers by appling seamless wireless communication and being collected from ECU(Engine Control Unit) equipment in every vehicle. Furthermore, this model also permits the use of realtime sensing data like as adverse weather and road-surface data. Here, the advisory safety speed is defined "the safety speed for drivers considering the time-dependent traffic condition and road-surface state parameter at uniform section", and the advisory safety speed model is developed by considering the parameters: inter-vehicles safe stopping distance, statistical vehicle speed, and real-time road-surface data. This model is evaluated by using the simulation technique for exploring the relationships between advisory safety speed and the dependent parameters like as traffic parameters(smooth condition and traffic jam), incident parameters(no-accident and accident) and road-surface parameters(dry, wet, snow). A simulation's results based on 12 scenarios show significant relationships and trends between 3 parameters and advisory safety speed. This model suggests that the advisory safety speed has more higher than average travel speed and is changeable by changing real-time incident states and road-surface states. The purpose of the research is to prove the new safety related services which are applicable in SMART Highway as traffic and IT convergence technology.

• Journal of Ocean Engineering and Technology
• /
• v.32 no.1
• /
• pp.21-27
• /
• 2018

The design and analysis of a quayside mooring system for safe mooring of Prelude FLNG under extreme environmental conditions were carried out. The design of the mooring system considered the yard operation conditions and maximum wind speed during a typhoon. In order to secure the mooring safety of Prelude FLNG under an extreme environment, a special steel structure was designed between the quay and Prelude FLNG to maintain the distance from the quay to a certain extent to avoid a collision with the inclined base. The mooring safety was also ensured by installing additional new parts on the quay. A mooring analysis and mooring safety review were performed with more rigorous modeling considering the nonlinearity of the mooring rope and fender. In order to secure additional safety of the mooring system under extreme environmental conditions, a safety assessment was conducted on the failures of the mooring components proposed in the marine mooring guidelines. Based on the results of the mooring analysis, it was confirmed that the Prelude FLNG can be safely moored even under the extreme conditions of typhoons, and a worst case scenario analysis verified that the mooring system design was robust enough. The proposed mooring analysis and design method will provide a basis for the safe mooring of ultra-large floating offshore structures of similar size in the future.

• Design & Manufacturing
• /
• v.17 no.2
• /
• pp.1-8
• /
• 2023

This study aims to enhance the price and quality competitiveness of imported tiles by developing a robotic tile production automation line. The development process involved several steps, such as requirement analysis, derivation of technical specifications, conceptual design, engineering feasibility review, detailed design, and production. Emphasis was placed on the transfer process of the tiles' molds, and technological advancements were achieved through engineering interpretation, feasibility review, and performance evaluation. The developed automation system incorporates key specifications to ensure a transfer success rate of over 90%, thereby ensuring stable transportation of the tiles and minimizing defect rates during production. The maximum weight capacity for tile pick-up was set above 6 kg, allowing effective handling of tiles weighing 6 kg or less in automated tasks. Furthermore, the system enables safe and precise movement of the tiles to the desired location, with a transfer distance of at least 1.3 m and a transfer speed exceeding 0.2 m/sec, thereby increasing production efficiency.

• Journal of the Korean Society for Railway
• /
• v.10 no.2 s.39
• /
• pp.231-242
• /
• 2007

As railroad industry faces the new Renaissance era, effective and efficient maintenance methods for rolling stock operation are required with advanced railroad technology. All kinds of railroad systems such as high-speed long-distance train, metropolitan mass transit and light rail require systematic maintenance technology in order to maintain the safe railroad operation. Simulation models for regular operations of the example maintenance center are developed. In this study, standard maintenance procedures, layout, equipments, and number of workers of Siheung Metropolitan Railroad Maintenance Rolling Stock Depot are considered. The proposed simulation models are developed using simulation package ARENA. After simulation, four types of observations are analyzed. First, the bottleneck operation is identified. Second, the relationship between maintenance center size, number of workers and cycle time is analyzed. Third, the scheduling performances between PERT/CPM and Critical Chain Project Management(CCPM) are compared. Lastly, the simulation results according to worker's working coverage shows expanding the worker's coverage decreases the cycle time and increases throughput per train. However, workers are to be fully trained to do multiple skill work.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.21 no.1
• /
• pp.40-46
• /
• 2015

Arctic Ocean has rapidly melted due to global warming, by this, commercial ship has been operating through the area. Reason to develop the Northern Sea Route(NSR) even in extreme conditions, the distance than the existing route is shortened, which bring economic benefits. For these reason, the International Maritime Organization(IMO) established safety standards of the Arctic navigation(Polar Code) in order to ensure safe operation in the Northern Sea Route. In this study, it has been described ice types and safety standards of Artic vessel what officer needs to know for safe navigation on the Arctic Ocean. And It was verified by simulation the theoretical knowledge for the safe operation of the Arctic vessel. As a result, it was found that ship needs to reduce speed and analyze ice for safe operation before enter into the ice, it is necessary to enter at right angle to break ice safety and efficiently. Also according to the result of the simulation of navigation entering in ice channel(Lead), it was difficult to change course, it is believed that require emergency training for passing Vessel. In the future, It shall be analyzed precisely under various conditions of scenario.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.16 no.3
• /
• pp.23-29
• /
• 2008

It is necessary to develope the active safety system in terms of driver's safety and convenience. In this paper, we were developed the non-contact type of safety window system operated by the initial value of feedback control such as the output signal of photo sensor. It was designed based on the control algorithm with an improved load sensitivity. Therefore, compared with the existing system, it is possible to prevent the occurrence of a mull-function. Also, it has a convenient functions of the window such as an auto up/down and closing, and has a response times better. It can be installed the various types of common vehicles that have the different movement distance and speed of window. In conclusion, the developed system may be adapted the vehicle commercially.

• Journal of the Korean Society of Safety
• /
• v.18 no.2
• /
• pp.132-138
• /
• 2003

The use of long rails in high-speed railway bridges causes additional stresses due to nonlinear behaviours between the rail and bridge decks in the neighbourhood of the deck joints. In the seismic response analysis of high-speed railway bridges, since structural response is highly sensitive to properties of the ground motion, spatial variation of the ground excitation affects responses of the bridges, which in turn affect stresses in the rails. In addition, it is shown that high-speed trains need very long distances to stop when braking under seismic occurrence corresponding to operational earthquake performance level so that verification of the safe stoppage of the train is also required. In view of such additional stresses due to long rails, sensibility of structural response to the properties of the ground motion and braking distance needed by the train to stop safely, this paper proposes and establishes a time domain nonlinear dynamic analysis method that accounts for braking loads, spatial variation of the ground motion and material nonlinearities of rails to analyze long rail stresses in high-speed railway bridges subjected to seismic event. The accuracy of the proposed method is demonstrated through an application on a typical site of the Korean high-speed railway.

• Journal of Institute of Control, Robotics and Systems
• /
• v.17 no.1
• /
• pp.12-16
• /
• 2011

Most car accidents occur when the driver does not look at the lane. Specially When the driver needs to find the path through the navigation, the driver have to look the other site. The number of such accidents can be prevented, if the driver receives the information without gazing other spot during the car is running. HUD (Head-Up Display) Technology, developed for enhancing the combat effectiveness and pilot's visibility in fighter, is applied to luxury cars for the safe operation of the driver. In recent years, the simple speed, lubrication status etc., as well as navigation information also shows through HUD. HUD is expected to increase in the future. But these HUD show the information elsewhere in the driver's eye focus. It is necessary to focus on the windshield for a few msec to check the information. In this paper, Introduced method display the HUD information in 3D as well as in similar distance the driver's eye focus so that the driver can operate the car more safely.

• Journal of KIISE:Databases
• /
• v.33 no.6
• /
• pp.631-643
• /
• 2006

Moving objects in a mobile environment to change their position based on the change of time require a query with their position as a basis. Efficient Regional Decision for Continuous Skyline Queries requires objectively pre-calculating the OSR(Optimal Skyline Region) regardless of the speed and direction of the moving objects. It proposes techniques to reduce the frequency of continuous queries by choosing a VCircle(Validity Circle) as safe location which has radius of the distance to the closest region with position on the moving object at center. But, a VCircle's area varies based on the Moving object's position from first marked time of continuous query. Therefore, the frequency of its continuous query is variable and also when the object moves inside of OSR, query can re-occur frequently In this paper, we suggest a technique of selecting an IVCircle(Interior Validity Circle) in a Skyline Region as the static Safe Region using the characteristics of the OSR. An Interior IVCircle can be calculated in advance when the OSR is decided. Our experiment shows that the frequency of using IVcircle as safe region reduced than that of using VCircle as safe region by 52.55%.