• Journal of Navigation and Port Research
• /
• v.44 no.5
• /
• pp.375-381
• /
• 2020

The IMO has established a regulation for the ECDIS installation on ships based on the IHO S-57 standards. The ECDIS supports sailors in achieving a safe voyage by using ENCs and monitoring the information of their ship. However, the S-57 standards were developed as edition 3.1 and prohibited revision for more than 20 years. So, the IHO developed a new standard as S-100 into the hydrography and maritime field instead of updating the S-57 to edition 4.0. In this study, the new S-100 ECDIS was developed and verified with ENCs and the digital maritime safety information by using a ship steering simulator and by conducting an on-board sea-trial test. It evaluated the impact on ship operations if the next-generation navigation support system is introduced. Based on this research, the S-100 ECDIS will generate improvements such as safe voyages by providing various of real-time safety information and up-to-date data to ship and sailors.

• Journal of the Korean Institute of Navigation
• /
• v.22 no.2
• /
• pp.99-112
• /
• 1998

It is very important to investigate the hull response of a fishing vessel in waves to ensure the safe navigation and fishing operation in rough seas by preserving excellent seakeeping qualities. For this purpose, we measured pitching and rolling response of three fishing vessels in seas using real seas experimental measuring system and analyzed the data by statisticawl and spectral analyzing method. We compared the measured results with theoretical results to give the validity of measuring system and experimental results. From the result we know that a good agreement between the experimental and theoretical results are shown except following seas. But there are little difference between both results in the other deirection too, which are caused by the effects of short crested waves of real seas.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2022.11a
• /
• pp.357-359
• /
• 2022

Autonomous decision-making is key to safe and efficient marine autonomy, as global marine industry comprises over 90 percent of the world's cargo transportation. Challenges of the real-world validation in the aquatic domain limits the wide-spread of ASVs despite their promising societal impacts. We propose and demonstrate the real-world validation platform and comprehensive algorithm steps. Such a framework will serve as a more explainable and reliable decision-making system of ASVs as well as autonomous vehicles in other domains.

• Journal of Advanced Marine Engineering and Technology
• /
• v.39 no.1
• /
• pp.86-93
• /
• 2015

Recently, the development of Maritime Service Portfolios (MSPs) for the safe navigation of ship has been discussed internationally. For the successful service of the MSPs, first of all, studies for the standardization about the structure and data structure of MSPs should be preceded. Also, it is necessary to evaluate and assess whether the services are effective for safe navigation, and provided data and portrayal methods are proper. However, because great dangers will be accompanied when untested MSPs about their effectiveness and safety are applied in real ship navigation, it is necessary that effectiveness and safety of the MSPs should be proven under various navigational conditions and environments by simulation. In this paper, we propose a 3D navigation simulation system using desktop PC environment, which is proper for evaluating the effectiveness of MSPs. The system consists of three modules which are simulation scenario editor, 3D visualization of navigational environment and 2D navigational equipment. The scenario editor module provides an environment setting for simulation, such as properties, routes and positions of vessels and aids to navigations. It also provides functions to create a scenario for the simulation to operate. Additionally, the 3D visualization module provides 3D navigational environment which shows interplay between geographical and navigational environment based on the created scenario. The 2D navigational equipment module provides visualization functions of various navigational equipment, shows the interaction between ship's navigational equipment and ship's environment. The simulation scenario, in which various kinds of ships are routing in the port, is created by the developed simulation system, and experimented whether this developed system is appropriate to evaluate and assess the MSPs developed by the International Maritime Organization.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.25 no.12
• /
• pp.1927-1934
• /
• 2021

The AtoN are installed and operated on the sea in order to help the safe navigation of ships. With the development of maritime ICT, to monitor and control the condition of AtoN from land using multiplex communication network such as AtoN AIS, CDMA, and LTE. Currently, The information of AtoN is difficult to integrated manage because AtoN management systems has been independently developed and operatie according to the operating conditions of the Regional Office of Oceans and Fisheries. In addition, in preparation for the introduction for e-navigation and MASS, systematic and unified information of AtoN is required. In this paper, we study to design and develop standard software for AtoN management system based on the international standard for navigation information(S-201). Through this study, it will be possible to provide continuous AtoN information and effective AtoN management.

• Journal of Aerospace System Engineering
• /
• v.6 no.3
• /
• pp.19-23
• /
• 2012

"The FAA's Next Generation Air Transportation System" is a comprehensive overhaul of U.S National Airspace System to make air travel more convenient and dependable, while ensuring the flight is as safe, secure and hassle-free as possible. At its most basic level, NextGen represents an evolution from a ground-based system of air traffic control to a satellite-based system of air traffic management. This evolution is vital to meeting future demand, and to avoiding gridlock in the sky and at U.S airports. NextGen will open worldwide's skies to continued growth and increased safety while reducing aviation's environmental impact.

• Journal of the Society of Naval Architects of Korea
• /
• v.45 no.5
• /
• pp.554-561
• /
• 2008

This paper deals with an intelligent digital ship which aims at development to support economic and safe services through an integration into the hierarchically layered digital signals such as ship's navigation, maneuvering and control signal and establishing a one-man bridge system in order to provide a support systems between ship and land station. This paper introduces the results of the mid-term project sponsored from Ministry of Commerce, Industry and Energy which consists of three sub-project such as INS(Intelligent Navigation System), AIS(Automatic Identification System), and IMIT (Integrated Maritime Information Technology). The INS system that can allow ships to navigate economically and safely through the integration and analysis of national data within the ship. AIS is a system that reports automatically on the location of the ship in order to prevent the collision between ships and between the ship and the land. IMIT is a integrated system for providing an efficient and economic support system between ships and the land and a ship-land platform and technologies.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.18 no.5
• /
• pp.599-604
• /
• 2008

Recently, many researches for autonomous mobile system have been proposed, which can recognize surrounded environment and navigate to destination without outside intervention. The basic sufficient condition for the autonomous mobile system is to navigate to destination safely without accident. In this paper, we propose a path planning method in local region for safe navigation of autonomous system through evaluation of the road surface distortion(damaged/deformed road, unpaved road, obstacle and etc.). We use laser distance sensor to get the information on the road surface distortion and apply image binalization method to evaluate safe region in the detected local region. We show the validity of the proposed method through the computer simulation based on the artificial local road map.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2010.10a
• /
• pp.144-145
• /
• 2010

VTM is regarded as a core element in e-Navigation under developing by IMO. IMO's e-Navigation aims for VTM which could provide more navigational information for ships and provide more active VTS services for safe and efficient marine traffic environment. To be successful for VTM under e-Navigation, VTS operator's experience and ability for carrying out VTM tasks are essential. In this study, Decision-making support system for VTS operators are designed conceptually which support VTS operators' VTM tasks by providing informations on traffic risk, and predicted behaviour of ships. This paper describes a designed system with design concept, main functions, main elements and necessary technologies to be developed.

• Journal of Advanced Navigation Technology
• /
• v.18 no.2
• /
• pp.128-133
• /
• 2014

This paper is the study of BNWAS based on TLC. The functionality of BNWAS and its operations are investigated through its international standard. But the BNWAS to be used currently in the ship have difficulty in monitoring. Several kinds of data are generated from many equipments in BNWAS, such as NMEA-0183 data or NMEA-2000. Although these data are mainly used for the safe navigation of ship, their usability may be enhanced if they are managed to control the BNWAS equipment with sensors. The purpose of this system is prevent the marine accidents on sailing voyages due to drowsiness of watchers. On Night sailing, watcher is collected the navigation information from multiple devices and he determines the safe operation of the ship through continuous monitoring.