• International conference on construction engineering and project management
• /
• 2022.06a
• /
• pp.94-102
• /
• 2022

Construction workers are engaged in many activities that may expose them to serious hazards, such as falling, unguarded machinery, or being struck by heavy construction equipment. Despite extensive research in building information modeling (BIM) for safety management, current approaches, detecting safety issues after design completion, may limit the opportunities to prevent predictable and potential accidents when decisions of building materials and systems are made. In this respect, this research proposes a proactive approach to detecting safety issues from the early design phase. This research aims to explore accident precursors and integrate them into BIM for tracking safety hazards during the design development process. Accident precursors can be identified from construction incident reports published by OSHA using a text mining technique. Through BIM-integrated accident precursors, construction safety hazards can be identified during the design phase. The results will contribute to supporting a successful transition from the design stage to the construction stage that considers a safe construction workplace. This will advance the body of knowledge about construction safety management by elucidating a hypothesis that safety hazards can be detected during the design phase involving decisions about materials, building elements, and equipment. In addition, the proactive approach will help the Architecture, Engineering and Construction (AEC) industry eliminate occupational safety hazards before near-miss situations appear on construction sites.

• Journal of the Korean Society of Safety
• /
• v.32 no.6
• /
• pp.143-149
• /
• 2017

According to traffic accidents statistics, the number of fatalities, injuries and the rate of increase of traffic accidents have been decreasing over last 5-years. The fatality rate is 1.9 for total accidents but the fatality rate for single vehicle accidents shows a 7.9, which is 4 times greater than the average for all accidents. Single vehicle accidents, usually occur as a vehicle impacts a fixed objects on the roadside as the vehicle runs-off from the road. However, few researches have been conducted considering the accident severity of single vehicle accidents which impact to the fixed objects on the road. The single vehicle accident is directly related to the composition of road cross section, (since it is the required the minimum width of a road for all run-off-the-road vehicles to recover or come to a safe stop). Therefore, this study analyzes the influence of road cross section on traffic accidents to find out the severity of single vehicle accident. To analyze the road elements which are related to the accident severity, the Ordered Probit Model was used. As variables, the element of road cross section such as the radius(m), vertical curve(%), cross sectional grade(%), road width(m). number of climbing lane, median, and curb, were used (as was the 3-years of accidents data). This study found out that cross slope(%), road width(m), and the number of climbing lane are related to the severity of accident. The result of this study could be expected to improve the road safety and to be used as the base data for further road safety research.

• Journal of Digital Convergence
• /
• v.16 no.10
• /
• pp.213-222
• /
• 2018

This study was conducted to derive the traffic accident risk index through the recognition of the elderly driver's driving pattern to reduce the traffic accident rate of elderly drivers and to reflect them in the renewal and return policy of driver's license accordingly. First, the traffic accident risk index is defined by analyzing the behavioral characteristics of older drivers to derive the major factors that lead to traffic accidents. Second, we present a method to measure the traffic accident risk index from the driving pattern of the elderly through the smart-phone, the camera and the distance sensor attached to the car. Finally, we derive three thresholds by computer simulation and determine the accident risk from the measured traffic accident risk index as four steps and suggest ways to ensure safe driving of older drivers. It is required to objectively assess the driving ability of an aged driver in accordance with the proposed method, and to induce the driver to reset the driver's license renewal cycle and voluntarily return the driver's license to minimize social costs due to increased traffic accidents.

• Journal of the Korean Society of Safety
• /
• v.27 no.2
• /
• pp.72-77
• /
• 2012

There are insufficient models that find problems and solutions for accident prevention through risk assessment and suggest safe work process and work instruction from foundation works to finish work for accident decrease. This paper presents a quantitative risk assessment model by analysis of risk factors in each process such as earth works, drainage works, pavement works, appurtenant works and etc based on accident examples and investigation on actual condition in roads construction work. In addition, the safety management system was developed to perform risk assessment of construction and use it for effective safety training for labor.

• Journal of the Korean Society of Safety
• /
• v.26 no.5
• /
• pp.73-80
• /
• 2011

There are insufficient models that find problems and solutions for accident prevention through risk assessment and suggest safe work process and work instruction from foundation works to finish work for accident decrease. This paper presents a quantitative risk assessment model by analysis of risk factors in each process such as foundation, erection, pier, pier upper and etc based on accident examples and investigation on actual condition in bridges construction work. In addition, the safety management system was developed to perform risk assessment of construction and use it for effective safety training for labor.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.8 no.5
• /
• pp.991-994
• /
• 2007

Recently, there has been major issue in safety of elevator. In the view of safe management of elevator, the corresponding research must be done since accidents related elevator include not only actual accident but also possible accident in order to protect user from dangerousness. This research aims to seek an analytical solution for safety apparatus which caused accident again and again among dangerous factors of an elevator. In order to assure safety of door, ANSYS, a commercial software was applied and evaluate safety qualitatively by calculating stress and strain deformed under the loads of 40 to 100kg.

• Journal of the Korea Safety Management & Science
• /
• v.14 no.4
• /
• pp.23-29
• /
• 2012

There are insufficient models that find problems and solutions for accident prevention through risk assessment and suggest safe work process and work instruction from foundation works to finish work for accident decrease. This paper presents a quantitative risk assessment model by analysis of risk factors in each process such as appurtenant works, temporary works, structural works, equipment work, finishing work and etc based on accident examples and investigation on actual condition in plants construction work. In addition, the safety management system was developed to perform risk assessment of plants construction and use it for effective safety training for labor.

• Nuclear Engineering and Technology
• /
• v.54 no.6
• /
• pp.2244-2252
• /
• 2022

Based on GIS technologies, a decision support system (GIDSS) has been developed to remediate agricultural lands in the Bryansk region (Russia) contaminated by ¹³⁷Cs after the accident at the Chernobyl nuclear power plant. GIDSS is a multilevel system consisting of basic, information and computational layers. GIDSS allows justifying a targeted approach for the remediation of agricultural lands belonging to agricultural enterprises for the production that meets the established radiological requirements for the content of radionuclides. Evaluation of the effectiveness of alternative remediation technologies and the selection of optimal measures were carried out at the level of elementary plots using radiological criteria. The introduction of GIDSS will enable agricultural producers in the south-western districts of the Bryansk region to conduct radiation-safe agro-industrial production in radioactively contaminated areas, which will help improve the socio-economic situation of the region and return it to normal living conditions.

• Proceedings of the Korean Society of Disaster Information Conference
• /
• 2023.11a
• /
• pp.211-214
• /
• 2023

본 연구의 목적은 안전행동과 사고 발생을 예측하고 관리하기 위해 안전성향검사 도구를 개발하고 타당도를 검증하는 것이었다. 안전 심리 분야에서 근로자의 안전 행동에 영향을 미치는 주요 변인으로 안전 리더십과 안전 문화에 대한 연구들이 많이 진행되어 왔다. Lewin에 따르면 Behavior = Person * Environment으로 환경은 물리적 환경(기계, 장비 등)과 심리-사회적(psyco-social) 환경(안전 리더십/문화)으로 구분할 수 있다. 하지만 국내의 경우 근로자 개인 특성이 안전 수행에 미치는 영향에 대한 연구는 부족하였다. 개인 특성 중 일관되게 행동에 영향을 미칠 수 있는 변인이 성격이고, Lee 등(2018)은 개인 성격이 안전/불안전 행동에 영향을 미칠 확률은 35% 이상이며, 불안전 행동으로 한정해 보면 50% 이상이라고 하였다. 그리고 불안전한 행동으로 인한 사고는 비교적 소수의 직원에 의해 발생한다고 하였다(Clarke & Robertson 2008). 따라서 안전/불안전 행동을 예측할 수 있는 성격 특성을 검증하여, 직원 선발이나 재직자 코칭에 활용한다면 산업 재해 예방에 도움이 될 수 있다

• Journal of the Korean Society of Safety
• /
• v.14 no.4
• /
• pp.176-181
• /
• 1999

The objective of this study is to compare and analyze the industrial injury-values of all the industries through yearly accident rate and frequency rate based on the governmental documentation of industrial injuries. The samples for this study are chosen from the companies with less than 200 employees under charge of the Kangnung Ministry of Labor during the period of 1995-97. Safe-T-Score is used for statistic control on the qualitative comparison of the present and the past industrial injury-rates. In the comparison of the past and the present industrial injury-rate by means of Safe-T-Score, this study shows that there does not exist any remarkable improvement, whereas the document of the Ministry of labor reports that the rate is decreasing greatly. Therefore, this study proposes some solutions to reduce industrial disasters and points out the necessity of more practical and effective methods to analyze the industrial disaster.