• 한국신재생에너지학회:학술대회논문집
• /
• 2006.06a
• /
• pp.539-542
• /
• 2006

Many researches about next generation vehicles are trending toward HEV which has better fuel economy than an internal-combustion engine. But existing HEV has some defects at specific running states(eg. highway running It is possible that dual-mode hybrid system overcomes that defects. Mode change parameter, ${\gamma}$ helps to analyse the mode changing of dual mode hybrid and is applied at a numerical analysis on testing the performance. There is an additional constraint when vehicles drive on engine mode. No power assistance of battery applies on engine mode. Because vehicles must be sustained by only engine power while vehicle drives on constant speed mode. At the conclusion of this paper, graphs show the ability of motors that satisfy the equilibrium of the lever system. Designers can roughly determine capacities of the motors, parameters of the lever system by this analysing method.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2006.11a
• /
• pp.82-88
• /
• 2006

The objective of this paper is to get excitation forces of the engine. A powertrain geometry model is produced by CATIA and its FE model is made by MSC/Patran. A vibration mode analysis which makes us know the natural frequency and mode shape and a running mode analysis which measures the mode shape as a relative displacement about one reference point by measuring the acceleration of each bracket to take a place at the running vehicle are experimentally implemented. After getting a satisfied MAC value by doing a correlation about a measured mode analysis value and analyzed value through MSC/Nastran software, all components are assembled through MSC/ADAMS software which is a dynamic analysis tool. We can predict the vibration of brackets which is the last points to occur the force of the engine combustion by analyzing the combustion force produced by engine mechanism.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.15 no.5
• /
• pp.133-138
• /
• 2007

Surface pitting is a major failure mode for gears. The contact fatigue life analysis of transmission gear considering running-in process is presented in this paper. Surface roughness change of rolling test is used in a life analysis. Contact stresses are obtained by contact analysis of a semi-infinite solid based on the use of influence functions; the subsurface stress field is obtained using rectangular patch solutions. Mesoscopic multiaxial fatigue criterion which can yield satisfactory results for non-proportional loading is then applied to predict fatigue damage. Suitable counting method and damage rule were used to calculate the fatigue life of random loading caused by rough surface. The life analysis considering running-in is in good agreement with the experimental results.

• Journal of the Korea Society of Computer and Information
• /
• v.21 no.5
• /
• pp.31-40
• /
• 2016

In this paper, we analyse the characteristics of the edge image and propose a new entropy coding optimized to the compression of the edge image. The pixel values of the edge image have the Gaussian distribution around '0', and most of the pixel values are '0'. By using this analysis, the Zero Block technique is utilized in spatial domain. And the Intra Prediction Mode of the edge image is similar to the mode of the surrounding blocks or likely to be the Planar Mode or the Horizontal Mode. In this paper, we make use of the MPM technique that produces the Intra Prediction Mode with high probability modes. By utilizing the above properties, we design a new entropy coding method that is suitable for edge image and perform the compression. In case the existing compression techniques are applied to edge image, compression ratio is low and the algorithm is complicated as more than necessity and the running time is very long, because those techniques are based on the natural images. However, the compression ratio and the running time of the proposed technique is high and very short, respectively, because the proposed algorithm is optimized to the compression of the edge image. Experimental results indicate that the proposed algorithm provides better visual and PSNR performance up to 11 times than the JPEG.

• Proceedings of the KIEE Conference
• /
• 2005.11b
• /
• pp.30-34
• /
• 2005

Due to old Toshiba EMS's database size limit and hardware old aging, KPX(Korea Power Exchange) had introduced New EMS from AREVA(old ALSTOM) in July 2002. After then KPX had committed many man power and time to normalize EMS NA(Network Analysis) functions for using real power system. At initial stage, to normalize State Estimator which is the backbone of all other NA functions and DTS(Dispatcher Training Simulator}, KPX had corrected numerous topology errors, network model errors, non-scanned and wrongly scanned SCADA measured errors. After SE function study, running test and tuning, State Estimator could finally have been run properly and stably from June 2003. Based on SE running, KPX had normalized real time Contingency Analysis, and study mode Power Flow, STNET and DTS. From early 2004, dispatchers have been trained to use NA and DTS for the purpose of stable SE running, NA operation & results reading and urgent equipment outage reviewing. EMS NA have been greatly contributed to operate real time power system stably. Above NA normal operation by KPX own efforts under the no experience of NA running, KPX made a good precedent. This paper is intended to introduce EMS NA normalization process, operation status, and etc in Korea power system operation.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.16 no.12 s.117
• /
• pp.1244-1251
• /
• 2006

The objective of this paper is to get excitation forces of the engine at each of the brackets for the prediction of the vehicle interior noise by the powertrain. A powertrain geometry model is produced by CATIA and its FE model is made by MSC/Patran. A vibration mode analysis and a running mode analysis are experimentally implemented. After getting a satisfied MAC value by doing a correlation about a measured mode analysis value and analyzed value through MSC/Nastran software, all components are assembled through MSC/ADAMS software which is a dynamic analysis tool. We can predict the vibration of brackets which is the last points to occur the force of the engine combustion by analyzing the combustion force produced by engine mechanism.

• Structural Engineering and Mechanics
• /
• v.75 no.3
• /
• pp.377-387
• /
• 2020

Modern long-span floor system typically possesses low damping and low natural frequency, presenting a potential vibration sensitivity problem induced by human activities. Field test and numerical analysis methods are available to study this kind of problems, but would be inconvenient for design engineers. This paper proposes a simplified method to determine the acceleration amplitudes of long-span floor system subjected to walking or running load, which can be carried out manually. To theoretically analyze the acceleration response, the floor system is simplified as an anisotropic rectangular plate and the mode decomposition method is used. To facilitate the calculation of acceleration amplitude a_P, a coefficient α_wmn or α_Rmn is introduced, with the former depending on the geometry and support condition of floor system and the latter on the contact duration t_R and natural frequency. The proposed simplified method is easy for practical use and gives safe structural designs.

• Proceedings of the KSR Conference
• /
• 2011.10a
• /
• pp.717-723
• /
• 2011

When the Balise(the device to transmit information between the on-board equipment and the wayside equipment) failure occurs, it may not be able to transmit data(Telegram) required for the train running. And in some cases, it may be able to cause an accident. Therefore, both the Balise failure affecting train safety running and the hazard in accordance with Balise failure require some activities to establish them. General failure mode & hazard analysis associated with the Balise are described in UNISIG SUBSET-036 spec & UNISIG SUBSET-088 spec. And, with reference to these specifications, safety activities are being performed. In recent domestic railway, the train control system applying ETCS(European Train Control System) Level 1, 2 is being serviced and is being planned, and as part of this system, the Balise is being applied. The design-method of the Balise device for each manufacturer are different, therefore the Balise failure mode & failure rate are different, either. But the functionalities & transmission-data format(Telegram) of the Balise in ETCS Level 1, 2 application for each manufacturer are identical. Accordingly, the hazard caused by function-fail can be identical, either. In order to establish these hazard, in this paper, we analyzed the detailed functions of the Balise. And we analyzed the Balise failure types & failure effects in accordance with the detailed functions.

• Journal of Microbiology and Biotechnology
• /
• v.15 no.3
• /
• pp.537-543
• /
• 2005

Subtilisin (EC 3.4.21.14) is the major extracellular alkaline serine protease of Bacillus species. Previously, we found that subtilisins did not migrate in the electrophoretic field in the Laemmili buffer system due to their high pI values (over 8.8); however, it formed a 'binding mode' at the top of the separating gel [5]. Utilizing this characteristic, four subtilisins from Bacillus sp. strains (e.g., B. subtilis 168, B. subtilis KCTC 1021, B. amyloliquefaciens KCTC 3002, and Bacillus sp. DJ-1 and DJ-4) were easily and quickly identified by an over-running electrophoretic technique with a miniscale culture supernatant (less than 20 ml) without any column chromatographic steps. Two subtilisins (DJ-l and a recombinant version) from Bacillus sp. DJ-l were characterized, and the enzymatic properties were determined by SDS-fibrin zymography and densitometric analysis. Based on this observation, the recombinant pro-subtilisin DJ-l showed the same 'binding mode,' similar to native subtilisin DJ-l. On the other hand, mature subtilisin DJ -1 without pro-peptide showed no enzymatic activity.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.28 no.6
• /
• pp.755-762
• /
• 2004

Dynamic analysis of the KTX can predict the dynamic motions in test drive. In this study an analytical model of the KTX is developed to find the critical speed. The numerical analysis for the nonlinear equation motions of 17 degrees of freedom shows the running stability and the critical speed due to the hunting motion of the KTX. Also, the vibration modes of the KTX are calculated using the ADAM/RAIL software, which show that the critical speed occurs for the yawing modes of the car body and the bogie. Finally, this paper shows that the critical speed of the KTX could be changed with the modifications of the design parameters of wheel conicity or wheel contact length.