• Transactions of the KSME C: Technology and Education
• /
• v.5 no.2
• /
• pp.115-126
• /
• 2017

This paper proposes an accelerated life evaluation of drive shaft for the power train parts of special purpose vehicle. It is necessary the real load data of usage level driving load condition for life evaluation of power train parts, but we can't get the load spectrum data for evaluation in many case of special purpose vehicle. So, in this paper, the road load spectrum data for evaluation is created by modeling and simulation based on vehicle data and special road condition. The inverse power model is used for accelerated life test. The equivalent torque of load spectrum is achieved using the Miner's Rule. This paper also proposes the calibrated acceleration life test method for drive shaft. The fatigue test is performed through three stress levels. The lifetime at normal stress level is predicted by extrapolation, and is verified through comparison of experimental results and load spectrum data.

• Journal of the Korean Society for Library and Information Science
• /
• v.49 no.3
• /
• pp.81-107
• /
• 2015

This study describes the Bottom-up method for implementation of an ontology system from the RDB. The STNet, a structured terminology glossary based on RDB, was served as a test bed for converting to RDF ontology, for generating the inference rules, and for evaluating the results of the semantic search. We have used protege editor of the ontology developing tool to design ontologies with test data. We also tested the designed ontology with the Inference Engine (Pellet) of protege editor. The generated reference rules were tested by TBox and SPARQL queries through STNet ontology. The results of test show that the generated reference rules were verified as true and STNet ontology were also evaluated to be useful for searching the complex combination of semantic relation.

• Journal of KIISE:Computer Systems and Theory
• /
• v.32 no.9
• /
• pp.465-474
• /
• 2005

For high density SoC design, on-chip communication based on bus interconnection encounters bandwidth limitation while an NoC(Network-on-Chip) approach suffers from unacceptable complexity in its Implementation. This paper introduces a new on-chip communication protocol, SNP (SoC Network Protocol) to overcome these problems. In SNP, conventional on-chip bus signals are categorized into three groups, control, address, and data and only one set of wires is used to transmit all three groups of signals, resulting in the dramatic decrease of the number of wires. SNP efficiently supports master-master communication as well as master-slave communication with symmetric channels. A sequencing rule of signal groups is defined as a part of SNP specification and a phase-restoration feature is proposed to avoid redundant signals transmitted repeatedly over back-to-back transactions. Simulation results show that SNP provides about the same bandwidth with only $54\%$ of wires when compared with AMBA AHB.

• Nuclear Engineering and Technology
• /
• v.42 no.6
• /
• pp.680-689
• /
• 2010

The crack-tip stress fields and fracture mechanics assessment parameters for a surface crack, such as the elastic stress intensity factor or the elastic-plastic J-integral, can be affected significantly by the adjacent cracks. Such a crack interaction effect due to multiple cracks can alter the fracture mechanics assessment parameters significantly. There are many factors to be considered, for instance the relative distance between adjacent cracks, the crack shape, and the loading condition, to quantify the crack interaction effect on the fracture mechanics assessment parameters. Thus, the current assessment codes on crack interaction effects (crack combination rules), including ASME Sec. XI, BS7910, British Energy R6 and API 579-1/ASME FFS-1, provide different rules for combining multiple surface cracks into a single surface crack. The present paper investigates crack interaction effects by evaluating the elastic stress intensity factor and the elastic-plastic J-integral of adjacent in-plane surface cracks in a plate through detailed 3-dimensional elastic and elastic-plastic finite element analyses. The effects on the fracture mechanics assessment parameters of the geometric parameters, the relative distance between two cracks, and the crack shape are investigated systematically. As for the loading condition, an axial tension is considered. Based on the finite element results, the acceptability of the crack combination rules provided in the existing guidance was investigated, and the relevant recommendations on a crack interaction for in-plane surface cracks are discussed. The present results can be used to develop more concrete guidance on crack interaction effects for crack shape characterization to evaluate the integrity of defective components.

• Journal of Advanced Navigation Technology
• /
• v.23 no.5
• /
• pp.430-436
• /
• 2019

It is needed to develop an antenna with features of subminiature, light weight and multi-band operation for the variaty services in maritime and industrial fields. The PCB pattern antenna is one of the appropreiate antennas solving these requirements. In this research, the design and fabrication of the PCB pattern antenna operating on the single band of 920 MHz are investigated. The final goal is that the development of the dual band PCB pattern antenna operating on 260 MHz and 920 MHz, which is based on the proposed antenna. It is evident that the performance in the frequencies of 902 MHz, 915 MHz and 928 MHz among of 920 MHz ISM band is better than that in other frequencies. It is also confirmed that the differences of the voltage standing wave ratio, return loss, gain and efficiency between three frequencies are less than 5%. It is expected that the development of communication link of 5-10 km is possible when the induced results are applied into the low power wide area (LPWA) network desinged by the rule of -30 dB sensitivity.

• Food Science and Industry
• /
• v.49 no.3
• /
• pp.55-61
• /
• 2016

Even though the food safety system in the United States is one of the best in the world, many millions of people become sick and thousands die from foodborne illnesses caused by any of a number of microbial pathogens and other contaminants. Large recalls of United States Department of Agriculture (USDA) and the Food Drug and Administration (US FDA)-regulated food products due to findings of E. coli O157:H7, Listeria, Salmonella, and other problems occur each year. As the US FDA Food Safety Modernization Act (FSMA) passed in 2011, FSMA will require food processing, manufacturing, shipping, and other regulated entities to conduct an analysis of the most likely safety hazards and to design and implement risk-based controls to reduce or eliminate these hazards. FSMA also mandates increased scrutiny of food imports, which account for a growing share of U.S. food consumption; food import shipments will have to be accompanied by documentation showing that they can meet safety standards that are at least equivalent to those in the U.S. On September 17, 2015, the US FDA published final rules for Preventive Controls for Human and Animal Food and, continuing into 2016, the US FDA intends to finalize the remaining five rules it has proposed to implement FSMA. Among these rules, this article will review and discuss Preventive Controls for Human Food Rule and its components, and suggest how to comply with these FSMA rules as foreign human food and ingredients suppliers to the US.

• Steel and Composite Structures
• /
• v.38 no.5
• /
• pp.563-582
• /
• 2021

The present study experimentally and analytically investigated the push-out behaviour of H-shaped steel section embedded in ultrahigh-performance fibre-reinforced concrete (UHPFRC). The effect of significant parameters such as the concrete types, fibre content, embedded steel length, transverse reinforcement ratio and concrete cover on the bond stress, development of bond stress along the embedded length and failure mechanism has been reported. The test results show that the bond slip behaviour of steel-UHPFRC is different from the bond slip behaviour of steel-normal concrete and steel-high strength concrete. The bond-slip curves of steel-normal concrete and steel-high strength concrete exhibit brittle behaviour, and the bond strength decreases rapidly after reaching the peak load, with a residual bond strength of approximately one-half of the peak bond strength. The bond-slip curves of steel-UHPFRC show an obvious ductility, which exhibits a unique displacement pseudoplastic effect. The residual bond strength can still reach from 80% to 90% of the peak bond strength. Compared to steel-normal concrete, the transverse confinement of stirrups has a limited effect on the bond strength in the steel-UHPFRC substrate, but a higher stirrup ratio can improve cracking resistance. The experimental campaign quantifies the local bond stress development and finds that the strain distribution in steel follows an exponential rule along the steel embedded length. Based on the theory of mean bond and local bond stress, the present study proposes empirical approaches to predict the ultimate and residual bond resistance with satisfactory precision. The research findings serve to explain the interface bond mechanism between UHPFRC and steel, which is significant for the design of steel-UHPFRC composite structures and verify the feasibility of eliminating longitudinal rebars and stirrups by using UHPFRC in composite columns.

• Journal of Korea Trade
• /
• v.26 no.7
• /
• pp.93-108
• /
• 2022

Purpose - This paper examines the admissibility of restitution as the legal consequence where a contract is frustrated under the Law of Reform (Frustrated Contracts) Act 1943 in comparison with Korean Civil Code (KCC). In order to provide practical guidelines and advice regarding choice of and application of law for contracting parties in international trade, the paper comparatively evaluates requirements and the scope of restitution under the Act 1943 and KCC. Design/methodology - This paper executes a comparative study to analyze whether the parties may claim restitution of money paid or non-money benefit obtained before or after the time of discharge under English law and KCC. To achieve the purpose, it focuses on the identifying characteristics of each statute, thereby providing guidelines to overcome difficulties in legal application and interpretation as to restitution as the consequence of frustration. Findings - Under English law, the benefit may be restituted according to Art 1943 or the common law rule, mistake of fact or law. Under the KCC, restitution is considered based on the principle of the obligation to recover the original obtained regardless of the time when the benefit is conferred. Whilst Act 1943 does not require careful analysis of the grounds of restitution, requirements to justify restitution according to the principle of unjust enrichment, mistake of fact or law, and the KCC should be met. Meanwhile, the KCC may provide more opportunities to award restitution because it does not require the burden of proof related to the defendant's good faith, unlike the principle of unjust enrichment. Originality/value - Where the contract is frustrated by the effect of COVID-19, one legal issue is a consequence of frustration. Therefore, this paper analyzes requirements and the scope of restitution under English law as compared with the KCC in a timely manner. It provides contracting parties with practical guidelines and advice to reduce unpredictability when they choose the governing law in a contract.

• Journal of the Korea Society of Computer and Information
• /
• v.14 no.11
• /
• pp.123-134
• /
• 2009

As the embedded software for weapon system is embossed, the information management system is required to service and manage the technical information of embedded software systematically. But the technical information documents are managed by its own organization separately, it's hard to service the information and share it with anyone who need. In this paper, to manage the embedded software information systematically, we analyze the information management system built in 2004 and the defence law/rule. Also we distinguish the software information from defence laws to manage systematically and analyze the requirements of the information system. Based on these, we suggest implementing the management system to increase efficiency of managing the weapon embedded software information. Through this, we can improve the utilization and reusability of the weapon embedded software.

• Journal of English Language & Literature
• /
• v.58 no.4
• /
• pp.701-721
• /
• 2012

This paper aims to revisit William Faulkner's Absalom, Absalom! by focusing on the corporeal body and its role in dismantling the Southern ideology of white patriarchy. The latter, which is represented by Thomas Sutpen and his attempt to establish a white male dynasty, is a symbolic space in which the corporeal body turns into a symbolic one through the process of inscribing social ideologies on it. However, this symbolic space is also a contending site between the two bodies. The symbolic body of Sutpen cannot entirely erase its corporeal traces, and therefore the corporeal body, which is buried but nonetheless existent, threatens to undermine rules and premises of the symbolic order. Given that, this paper approaches Faulkner's critique of the Southern white patriarchal ideology from the tension that the corporeal body and the symbolic body create. The 'flesh' roughly corresponds to racial and sexual otherness, namely black flesh and the homoerotic desire of male body. Although they-as the matter of race and that of gender - function in different levels of signification, they still share a common purpose in revealing the logical paradox within Sutpen's symbolic order. The idea of pure whiteness that Sutpen subscribes to is a concept that prerequisites the existence of blackness. Likewise, his idea of male homosociality based upon patriarchal legacy stands precariously on the verge of disintegrating into homoetoricism. As internal otherness that Sutpen's symbolic order cannot fully incorporate, the corporeal body functions to indicate the limitation of Sutpen's Design and its body-signification process.