• Korean Journal of Plant Resources
• /
• v.22 no.4
• /
• pp.337-342
• /
• 2009

Present studies were conducted to evaluate the effects of medium strength(MS and Hyponex), carbon sources and their concentrations, agar concentrations, and inoculation amounts on prothallus propagation of Pterdium aquilinum var. latiusculum(Desv.) Underw. ex Hell in vitro. The optimum MS medium strength for prothallus propagation was 2MS concentration. Phosphate source was most effective for prothallus growth of P. aquilinum var. latisculum. The addition of 1% sucrose or glucose to MS medium promoted prothallus multiplication. Growth of prothallus was not affected by agar concentration. Propagation of homogenized prothallus was vigorous even in liquid medium. Chopped gametophytes(100 and 200 mg) were inoculated on 250 ml ${\Delta}$flask with 100 mL of 2MS concentration medium and suspension culture was done at 100 rpm for 22 days. After 20 days, prothallus multiplication slowed down, so 100 mg of chopped prothalli is recommended for initial inoculation, since initial amount of inoculum did not affect subsequent prothallus multiplication. Consequently after 20 days of suspension culture, prothallus should be subcultured or transplanted outside of growing vessels.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.39 no.1
• /
• pp.8-13
• /
• 2010

The angiotensin converting enzyme (ACE) inhibition effect of soybean protein isolate hydrolysate was studied using protease. Soybean protein isolate was hydrolysed by seven enzymes (Alcalase 2.4 L, Flavourzyme 500 MG, GC 106, Multifect Neutral, Neutrase 0.8 L, Papain 30,000 and Protamex), enzyme concentrations (0, 0.5, 1.0 and 1.5%), at various hydrolysis times (0, 1, 2, 3, 4, 5 and 6 hr) and suspension concentrations (1, 5, 7, 10 and 15%). Absorbance at 280 nm, brix and ACE inhibitory activity of soybean protein isolate hydrolysates were investigated. Absorbance at 280 nm and brix of Alcalase 2.4 L treatment were higher than other enzyme treatments. The optimum condition of hydrolysis was Alcalase 2.4 L, 1% enzyme concentration, 5% suspension concentration for 4 hr. $IC_{50}$ value of ACE inhibitory activity of soybean protein isolate hydrolysate was $79.94 {\mu}g/mL$. These results suggest that soybean isolate protein hydrolysate from Alcalase 2.4 L may be of benefit for developing antihypertensive therapeutics.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.2
• /
• pp.983-989
• /
• 2013

The current research reviewed the design conditions that would maximize the efficiency of the hybrid collector that combines in one unit "cyclone-inertial impaction-bag filter". The computational analysis for the shape of cyclone entry predicts that a design that installs the guide vane at the entry of the tangential type cyclone brings a high-rpm and powerful vortex, very effective in promoting the deflection of coarse particles from the streamline at the cyclone. As the lower part of the cyclone is venturi-shaped, however, a strong flow downward of 4 to 5 m/sec persists through the lower part of the hopper, revealing the likely reentrainment of collected dust. And the removal of the venturi at the lower part of the cyclone would solve the problem of the reentrainment of collected dust. The acceleration of the flow velocity through the adjustment of the gap of the collision baffle would increase the effect of collision, but as the interference with the dust separation is expected, the original design should be kept for the baffle.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.27 no.5
• /
• pp.286-291
• /
• 2014

In this study, novel ultrasonic rotary motor of hexadecagon shape stator was proposed. Stator of the hexadecagon ultrasonic motor was composed of an elastic ring and ceramics. The elastic ring had sixteen sides and sixteen angular points. Eight ceramics were attached on the outer surface of the eight sides of the ring. When rotor of cylindrical shaft was inserted inside of the ring stator, central lines of the sixteen sides of the stator hold the shaft by the slight pressures(frictions). This slight pressure was a preload of the motor and it could be controlled by radius and thickness of the ring. When two sinusoidal voltages which have 90 degree phase difference were applied to each four ceramics, elliptical displacements of inner surface of the ring were obtained. These elliptical displacements of the inner surface rotated the shaft rotor through the frictions. The proposed hexadecagon ultrasonic motor was designed and analyzed by using the finite element method (FEM), depending on materials of the elastic ring. Based on the FEM results, one model of motor which showed maximum displacement at contact points was chosen and fabricated. And characteristics of the motor were compared with simulated results. When the motor was fabricated with these results, EL20ET0.5CT0.5CW2 model showed 115[rpm] speed about input voltage of 60[Vrms] at 65.6[kHz]. And the maximum torque of 6[gfcm] was obtained. From these results, the hexadecagon shaped ultrasonic motor can be used to actuator for optical device which needs detailed position control. Also it can be used to medical and portable device by reducing size and weight.

• Journal of Advanced Marine Engineering and Technology
• /
• v.39 no.3
• /
• pp.248-254
• /
• 2015

There has been no previous study on technology development of large capacity drainage pump for rescue sinking ship in the country. The agricultural drainage pump was widely used for rescue sinking ship but this pump has several problems such as efficiency, low displacement and malfunction in winter. Therefore, this paper proposes to solve the problems for swiftly rescue sinking ship and develops the drainage pump system that has $20m^3/min$ mass flow rate specification at suction head 8 m. The centrifugal pump type the most commonly used in the field of naval architecture and ocean engineering was selected and designed based on the requirement specification. The blade design of impeller was derived from the Stepanoff coefficient and requirement specification and used computational fluid dynamics to review the target mass flow rate according to the impeller RPM at design operating conditions. We also performed structure analysis of the impeller to find structurally vulnerable points for the pump in service and completed the theoretical design of drainage pump system.

• Journal of Microbiology and Biotechnology
• /
• v.13 no.6
• /
• pp.960-968
• /
• 2003

A bacterial isolate showing a strong endochitosanase activity was isolated from soil and then characterized. The isolate was identified and designated as Bacillus cereus P16, based on morphological and biochemical properties, assimilation tests, cellular fatty acids pattern, along with 16S rRNA gene sequence. The optimized medium for producing extracellular chitosanase in a batch culture contained 1% tryptone, 0.5% chitosan, and 1% NaCl (pH 7.0). Powder chitosan and tryptone served the best as carbon and nitrogen sources, respectively, for the chitosanase production. Chitosanase activity was the highest when culture was completed at $37^{\circ}C$ among various temperatures ($20-42^{\circ}C$) tested in a shaking incubator (200 rpm). The levels of chitosanase activity in the culture fluid were 2.0 U/ml and 3.8 U/ml, respectively, when incubated in a flask for 60 h and in a jar fermenter for 24 h. The culture supernatant showed a strong liquefying activity on the soluble chitosan. The viscosity of 1% chitosan solution, that was incubated with the culture supernatant, was rapidly decreased, suggesting the secretion of endochitosanolytic enzymes by P16. The culture fluid revealed six endo-type chitosanase isozymes, two major (38 and 45 kD), and four minor (54, 65, 82, and 96 kD) forms by staining profile. The crude enzymes were very stable, and full activity was maintained for 4 weeks at $4^{\circ}C\;or\;-20^{\circ}C$ in the culture supernatant, suggesting a highly desirable stability rate for making an industrial application of the crude enzymes. The supernatant also cleaved the insoluble chitosan powder, but the hydrolysis rate was much lower. The enzymic degradation products of chitosan contained $(GlcN)_n$ (n=2-8). The concentration of chitosan in the reaction mixture of the crude enzyme affected the chitooligosaccharides composition of the hydrolysis products. When the higher concentration of chitosan was used, the higher degree of polymerized chitooligosaccharides were produced. By comparison with other commercial chitosanase preparations, P16 was indeed found to be a valuable enzyme source for industrial production of chitooligosaccharides from chitosan.

• Journal of Pharmaceutical Investigation
• /
• v.27 no.4
• /
• pp.303-311
• /
• 1997

Proliposomal patch of clenbuterol, ${\beta}_2-agonist$ bronchodilator, was prepared and its feasibility as a novel transdermal drug delivery system was examined. Proliposomal granules containing clenbuterol was prepared by a standard method using sorbitol and lecithin with (Rx 2) or without cholesterol (Rx 1). The porous structure of sorbitol in the proliposomes was maintained allowing tree flowability of the granules. Following contact with water, the granules were converted probably to liposomes almost completely within several minutes. It indicates that proliposomes may be hydrated, when they are applied on the skin under occlusive condition in vivo, by the sweat to form liposomes. Clenbuterol release from Rx 1 and Rx 2 proliposomes to pH 7.4 isotonic phospate buffer (PBS) across cellulose membrane (mol. wt. cut-off of 12000-14000) was retarded significantly compared with that from the mixture of clenbuterol powder and blank proliposomes. Interestingly, proliposomes prepared with lecithin and cholesterol (i.e., Rx 2 proliposomes) showed much more retarded release of clenbuterol than proliposomes prepared only with lecithin (i.e.. Rx 1 proliposomes), indicating that clenbuterol release from proliposomes can be controlled by the addition of cholesterol to the proliposomes. Proliposomal patches were prepared using PVC film as an occlusive backing sheet, two sides adhesive tape (urethane, 1.45 mm thickness) as a reservoir for proliposome granules and Millipore MF-membrane (0.45 mm pore size) as a drug release-controlling membrane. Rx 1 or Rx 2 proliposomes containing 4.6 mg of clenbuterol were loaded into the reservoir of the patch. Clenbuterol release from the patches to pH 7.4 PBS was determined using USP paddle (50 rpm)-over-disc release method. Clenbuterol release from the proliposomal patches was much more retarded even than from a matrix type clenbuterol patch (Boehringer Ingelheim ltd). Being consistent with clenbuterol release from the proliposomal granules, the release from the patches was highly dependent on the presence of cholesterol in the proliposomes : Patches containing Rx 2 proliposomes showed several fold slower drug release than patches containing Rx 1 proliposomes. When the patch containing Rx 1 proliposomes was applied on to the back of a hair-removed rat, clenbuterol concentration in the rat blood was maintained during 6-72 hrs. Transdermal absorption of clenbuterol from the patch was accelerated when the patch was prehydrated with 50 ml of pH 7.4 PBS before topical application. Above results indicate that sustained transdermal delivery of clenbuterol is feasible using proliposomal patches if the cholesterol content and pore size of the release rate-controlling membrane of patches, for example, are appropriately controlled.

• Applied Biological Chemistry
• /
• v.48 no.4
• /
• pp.364-369
• /
• 2005

This study was performed to elucidate substrate specificity to the locust bean gum galactomannan by Trichoderma harzianum ${\beta}-mannanase$. The medium composition for enzyme production were determined 3% cellulose, 3% corn steep liquor, 1% $KH_2PO_4$, 0.2% $(NH_4){_2}SO_4$, and incubated for 115 hr at $28^{\circ}C$. The ${\beta}-mannanase$ exhibited maximum activity at pH 4.5 and $60^{\circ}C$. Locust bean gum galactomannan was hydrolyzed by the ${\beta}-mannanase$, and then hydrolysates separated by activated carbon column chromatography. The main hydrolysates were composed of D.P 4 and 7 galactosyl mannooligosaccharides by TLC. For the elucidate the structure of D.P 4 and 7 oligosaccharides, methylation analysis was performed. D.P 4 and 7 were identified as M-M-M-M and M-M-M-M-M (G- and M-represent ${\alpha-1,6-D-galactosidic\;and\;{\beta}-1,4-mannosidic$ linkages, respectively). //G-G To investigate the effects of locust bean gum galactosyl mannooligosaccharides on the in vitro growth of B. longum, B. bifidum, B. infantis, and B. breve, Bifidobacterium spp. were cultivated individually on the modified-MRS medium containing carbon source such as D.P 4 and 7 galactosyl mannooligosaccharides, respectively. B. longum grew up 3.4-fold and 4.3-fold more effectively by the replacement of D.P 4 and 7 galactosyl mannooligosaccharides as the carbon source in a comparasion of standard MRS.

• Applied Biological Chemistry
• /
• v.48 no.3
• /
• pp.207-211
• /
• 2005

The metabolites released from cultures of rhizosphere bacteria can inhibit plant growth. Bacillus subtilis IJ-31 inhibited plant growth by the production of hydrocinnamic acid (HCA). The production of HCA by plant-growth inhibiting rhizobacterium B. subtilis IJ-31 was optimized. $90.5\;{\mu}g/ml$ of HCA was obtained under the condition of 1% rice bran as carbon source, 0.5% tryptone as nitrogen source, 0.1% $ZnCl_2$ as metal source at $37^{\circ}C$ for 60 h (pH 7.0). The optimal condition for the HCA production by B. subtilis IJ-31 in the jar fermenter was established using response surface methodology (RSM) of statistical analysis system(SAS) program. The production of HCA by B. subtilis IJ-31 in the jar fermenter culture reached $102.99\;{\mu}g/ml$ when 2.24% soil extracts was added and agitation speed was 290 rpm under the same condition. And the experimental value of HCA production is $102.5\;{\mu}g/ml$ in the same culture condition. The production of HCA by B. subtilis IJ-31 is higher as 12% than that from the flask culture.

• Applied Biological Chemistry
• /
• v.46 no.4
• /
• pp.291-298
• /
• 2003

A bacterial strain producing a high level of an extracellular phytase was isolated from livestock waste water, identified as a strain of Pseudomonas fragi and designated as Pseudomonas fragi Y9451. Under the phytase production medium, the activity of phytase reached the highest level after 120 hours of incubation. On the effect of carbon sources on the phytase production, the most favorable carbon source for phytase production was fructose. As for the effect of nitrogen sources, high levels of phytase activity were detected in the medium containing nutrient broth as the nitrogen source. Free $PO_4^{3-}$ inhibited phytase production with increasing concentration of $KE_2PO_4$ and phytate in the media. The addition of $CaCl_2$ and $MgSO_4$ also resulted in the inhibition of phytase production. To investigate the effect of aeration on the phytase production, different volumes of culture broth in Erlenmeyer flasks were incubated in rotary shaker at the speed of 200 rpm. As a result, a high level of phytase activity was detected at small volume of culture broth as compared to larger volume because of its more aerobic condition.