DOI QR코드

DOI QR Code

Development of Drainage Pump for Rescue Sinking Ship

침수선박 구조를 위한 대용량 배수펌프 개발

  • Received : 2014.12.11
  • Accepted : 2015.03.03
  • Published : 2015.03.31

Abstract

There has been no previous study on technology development of large capacity drainage pump for rescue sinking ship in the country. The agricultural drainage pump was widely used for rescue sinking ship but this pump has several problems such as efficiency, low displacement and malfunction in winter. Therefore, this paper proposes to solve the problems for swiftly rescue sinking ship and develops the drainage pump system that has $20m^3/min$ mass flow rate specification at suction head 8 m. The centrifugal pump type the most commonly used in the field of naval architecture and ocean engineering was selected and designed based on the requirement specification. The blade design of impeller was derived from the Stepanoff coefficient and requirement specification and used computational fluid dynamics to review the target mass flow rate according to the impeller RPM at design operating conditions. We also performed structure analysis of the impeller to find structurally vulnerable points for the pump in service and completed the theoretical design of drainage pump system.

국내에는 아직 침수선박 구조용 대용량 배수펌프에 대한 기술개발 사례가 없는 상황이다. 현재 침수선박 구조를 위해 농업용 배수펌프가 사용되고 있으나 실효성이 현저히 떨어지며, 낮은 배수량, 이물질 걸림 현상, 겨울철 운전 오작동 등의 문제점이 있다. 따라서 본 논문에서는 해양에서 신속한 침수선박의 구조를 위해 현재 장비가 가지는 문제점을 개선하여 분당 20 톤의 배수량을 가지는 대용량 배수펌프 시스템을 개발하고자 한다. 대용량 배수펌프 시스템은 펌프 배출구를 통해 배출되는 흡입양정 8 m에서 분당 20 톤의 해수를 배출하는 것을 목표로 배수펌프 시스템 설계 및 개발을 수행하였다. 펌프종류는 조선해양 분야에서 액체를 이송하는데 가장 많이 사용되는 원심펌프를 채택하였으며, 요구 시방을 기초로 펌프를 설계하였다. 임펠러 블레이드는 요구 시방과 Stepanoff 설계 상수를 이용하여 임펠러 제원과 블레이드 입출구각을 도출하였고, 설계된 임펠러와 하우징 형상에서 목표 유량 만족 여부를 확인하기 위해 유동해석을 수행하여, 임펠러 회전수에 따른 유량을 검토하였다. 또한 실제 운전 중에 발생할 수 있는 제품에 대한 구조적인 취약성을 판단하기 위해 임펠러 구조해석을 수행하여 안전성을 검토하여, 침수선박 구조를 위한 배수펌프 시스템 개발을 완료하였다.

Keywords

References

  1. J. O. Mo, Y. T. Mo, and Y. H. Lee, "Numerical study on cavitation performance evaluation in a centrifugal pump impeller," Journal of the Korean Society of Marine Engineering, vol. 36, no. 2, pp. 286-293, 2012. https://doi.org/10.5916/jkosme.2012.36.2.286
  2. K. B. Pyun, J. H. Kim, Y. S. Choi, and J. Y. Yoon, "Design optimization of a centrifugal pump impeller using RSM and design of volute," Journal of the Korean Society for Fluid Machinery, vol. 15, no. 3, pp. 39-45, 2012.
  3. Y. J. An and B. R. Shin, "Numerical analysis on the eEffect of flow rate variation in double-suction centrifugal pump," Journal of the Korean Society for Fluid Machinery, vol. 6, no. 6, pp. 51-53, 2010.
  4. S. H. Baek, W. H. Jung, and S. M. Kang, "Shape optimization of impeller blades for bidirectional axial flow pump," Journal of the Korean Society of Mechanical Engineering, vol. 36, no. 12, pp. 1141-1150, 2012. https://doi.org/10.3795/KSME-B.2012.36.12.1141
  5. S. Kim, Y. S. Choi, J. Y. Yoon, and D. S. Kim, "Design optimization of centrifugal pump impeller using DOE," Journal of the Korean Society for Fluid Machinery, vol. 11, no. 3, pp. 36-42, 2008. https://doi.org/10.5293/KFMA.2008.11.3.036
  6. J. Gonzalez, J. Femandez, and E. Blanco, "Numerical simulation of the dynamic effects due to impeller-volute interaction in a centrifugal pump," Journal of Fluid Engineering, vol. 124, no. 2, pp. 348-355, 2002. https://doi.org/10.1115/1.1457452
  7. K. Majidi, "Numerical study of unsteady flow in a centrifugal pump," ASME Turbo Expo 2004, vol. 5, pp. 805-814, 2004.
  8. H. B. Jin, M. J. Kim, C. H. Son, and W. J. Chung, "Spiral casing of a volute centrifugal pump-effects of the cross sectional shape," Journal of the Korean Society for Fluid Machinery, vol. 16, no. 4, pp. 28-34, 2013 https://doi.org/10.5293/kfma.2013.16.4.028
  9. F. G. Johann, Centrifugal Pumps, Springer, 2010.

Cited by

  1. The effect of suction pipe leaning angle on the internal flow of pump sump vol.39, pp.8, 2015, https://doi.org/10.5916/jkosme.2015.39.8.849