• Structural Engineering and Mechanics
• /
• 제4권5호
• /
• pp.569-586
• /
• 1996

A new three-dimensional 8-node solid element with rotational degrees of freedom is presented. The proposed element is established by adding rotational degrees of freedom to the basic 8-node solid element. Thus the element has three translations and three rotational degrees of freedom per node. The corner rotations are introduced by transforming the hierarchical mid-edge displacements which are parabolic shape along an edge. The derivation of the element is based on the mixed variational principles in which the rotations are introduced as independent variables. Several types of non-conforming modes are selectively added to the displacement fields to obtain a series of improved elements. The resulting elements do not have the spurious zero energy modes and Poisson's ratio locking and pass patch test. Numerical examples show that presented non-conforming solid elements with rotational degrees of freedom show good performance even in the highly distorted meshes.

• 대한의용생체공학회:의공학회지
• /
• 제14권2호
• /
• pp.113-123
• /
• 1993

The aim of this study is to design a electrogoniometer for the measurement of three dimensional human elbow joint rotations. Using this device and visual monitor, we measured the angle of elbow joint rotations during the goal-directed movements. And we extracted myoelectric signals(MES) to verify the inter-relationship of elbow joint activities and constructed a system for the analysis of the spectrum for MES. The data obtained from this system will be used for the controller signal of prosthetic arm.

• Steel and Composite Structures
• /
• 제31권4호
• /
• pp.397-408
• /
• 2019

In this paper, a geometrically nonlinear meshfree analysis of 3D various forms of shell structures using the double director shell theory with finite rotations is proposed. This theory is introduced in the present method to remove the shear correction factor and to improve the accuracy of transverse shear stresses with the consideration of rotational degrees of freedom.The present meshfree method is based on the radial point interpolation method (RPIM) which is employed for the construction of shape functions for a set of nodes distributed in a problem domain. Discrete system of geometrically nonlinear equilibrium equations solved with the Newton-Raphson method is obtained by incorporating these interpolations into the weak form. The accuracy of the proposed method is examined by comparing the present results with the accurate ones available in the literature and good agreements are found.

• 대한수학회보
• /
• 제57권6호
• /
• pp.1529-1539
• /
• 2020

The present work is aimed at presenting some characteristic properties of functions that map open unit disk onto a lune in the right half plane. Furthermore, we introduce subclasses of functions with boundary and radius rotations which are related to crescent regions. Some useful results, which include coefficient inequalities and some subordination properties associated with these subclasses are derived. Consequently, related problems concerning these classes are also studied.

• 대한수학회논문집
• /
• 제37권4호
• /
• pp.995-1007
• /
• 2022

In this article, we initiate subclasses of functions with boundary and radius rotations that are related to limaçon domains and examine some of their geometric properties. Radius results associated with functions in these classes and their linear combination are studied. Furthermore, the growth rate of coefficients, arc length and coefficient estimates are derived for these novel classes. Overall, some useful consequences of our findings are also illustrated.

• 한국운동역학회지
• /
• 제21권4호
• /
• pp.467-477
• /
• 2011

This study was performed to investigate the effects of tibial rotation while going up stair on muscle activity of vastus medialis oblique and vastus lateralis, and on patellar displacement. The subjects included 30 people (male: 15; female: 15) who were randomly assigned to the tibial internal-rotation, neutral-rotation, and external-rotation groups. The subjects went up the stair while performing the assigned rotations, and the rotation of the hip and the displacement of the patella were measured using a 3D motion analyzer. In addition, the maximum voluntary isometric contraction (MVIC) of the vastus medialis oblique and vastus lateralis were measured using surface electromyogram. On the tibial internal rotation, the hip rotation significantly appeared in the same direction and so did on the tibial neutral and external rotations(p<.001). Although the MVIC of the vastus medialis oblique and vastus lateralis did not significantly differ by tibial rotation during the stair ascent, the MVIC of the vastus medialis oblique was higher than that of the vastus lateralis during the internal and neutral rotations (p<.05). In addition, during the stair ascent, the displacement of the patella was more significant during the tibial external rotation than during the tibial internal and neutral rotations(p<.001). Thus, patients with patellofemoral pain are required to be considered the effects of tibial rotation for their rehabilitation.

• 대한전자공학회논문지SP
• /
• 제40권4호
• /
• pp.256-265
• /
• 2003

지문을 기반으로 하는 생체 인식 시스템이 보다 실용적이고 높은 신뢰성을 가지기 위해서는, 입력지문의 회전에 강인해야 할뿐만 아니라 검증이나 인식에 소요되는 응답 시간이 짧아야 한다. 따라서 본 논문에서는 회전에 강인할 뿐만 아니라 처리속도가 빠른 방향성 필터 뱅크 기반의 지문 특징 추출 및 정합 방법을 제안한다. 제안한 방법은 영상을 방향별 대역 영상으로 효과적으로 분해해 주는 방향성 필터 뱅크를 이용하여 지문 패턴의 특징을 빠른 속도로 추출할 뿐만 아니라 특징 벡터 간 유클리드 거리에 기반하여 정합을 수행하기 때문에 전체 응답 속도가 매우 빠르다. 회전에 대해 강인한 특성을 가지도록 하기 위해 방향성 필터 뱅크에 의해 분해된 대역 영상에서 다양한 회전을 고려한 특징 백터 집합을 구성한 다음 등록된 단일템플릿 특징 백터와 정합을 수행한다. 실험 결과 제안한 방법이 기존의 방법 중 선두적인 방법 중의 하나인 Gabor 필터 뱅크 기반 방법에 상응하는 정확도를 가지면서 훨씬 빠른 속도로 검증을 수행할 뿐만 아니라 회전에 강인한 특성을 가짐을 보여 주었다.

• 대한치과교정학회지
• /
• 제24권2호
• /
• pp.479-508
• /
• 1994

This study was designed to investigate the reciprocal movement which was derived form application of active torque in ideal archwire by computer-aided three-dimensional finite element analysis of maxillary teeth and surrounding periodontal ligament composed of 2617 elements and 3725 nodes. Ideal archwire model was also made using the beam elements and the contact between the wire and the bracket slot was made using the gap element. In this study non-linear elastic behaviors of contact between the wire and the bracket slot were considered on. We put the active torque between the lateral and cenral incisor and between the second premolar and the first molar with/without cinch-back. The results were expressed by quantitative and visible ways. The findings of this study were as follows: 1. Reciprocal actions to active torque were complex system consisting of a combination of counter-torque, bucco-lingual linear displacement and tipping, rotation of the teeth, occluso-gingival linear displacement. 2. When active anterior crown labial torque was applied, crown labial tippings of the lateral were the greatest, and those of the central incisor was the next, Crown lingual tippings of the canine and the first premolar, mesial rotations and extrusion of the lateral and distal rotations and intrusion of the canine occurred. When anterior torque with the cinch-back was applied, amount of crown labial tippings of the lateral and central incisor were reduced. Amount of crown lingual tipping of the canine and the first premolar were increased. Mesial tippings and mesial rotations of the second molar occurred. 3. When active posterior crown lingual torque was applied, crown lingual tippings of the first moalr were the greatest, and crown labial tippings of the second premolar and the first premolar were the next, the crown lingual tipping of the second molar were a little. Mesial rotations of the second premolar occurred but those of the first premolar didn't occurred.

• 전산구조공학
• /
• 제10권4호
• /
• pp.205-216
• /
• 1997

구속된 ?(restrained warping)효과를 고려하는 박벽 공간뼈대구조의 횡후좌굴거동을 조사하기 위하여 기하학적 비선형 유한요소이론 및 해석법을 제시한다. 가상일의 원리를 이용하여 대변형효과를 고려한 3차원 연속체의 평형방정식으로부터, 구속된 ?효과를 고려하고 유한한 회전각의 2차항의 효과를 포함하는 변위장을 도입하여 초기응력을 받는 박벽 공간뼈대요소의 증분평형방정식을 유도한다. 박벽 공간뼈대구조를 유한요소로 나누고 변위장을 요소변위에 관한 Hermitian 다항식으로 나타내어 이를 평형방정식에 대입함으로써 접선강도행렬을 유도한다. 또한 updated Lagrangian formulation에 근거하여, 증분변위로부터 강체회전변위와 순수변형성분을 분리시켜서 강체회전은 요소의 방향변화를 결정하고, 순수변형은 부재력증분을 산정하는 불평형하중 산정법을 제시한다. 박벽 공간뼈대구조의 횡-비틂좌굴 및 후좌굴 거동에 대한 예제들을 통하여 본 연구에 대한 해석결과와 문헌의 결과를 비교 검토함으로써 본 연구에서 제시된 이론 및 해석방법의 정당성을 입증한다.

• 전산구조공학
• /
• 제10권1호
• /
• pp.201-211
• /
• 1997

공간뼈대의 구조에 대하여 기하학적 비선형성이 고려될 수 있는 유한요소이론 및 해석법을 제시한다. 이를 위하여 가상일의 원리를 이용하여 대변형효과를 고려한 3차원 연소체의 평형방정식으로부터, 구속된(restrained warping)효과를 무시하고 유한한 회전각의 2차항의 효과를 포함하는 변위장을 도입하여 초기응력을 받는 공간뼈대요소의 증분평형방정식을 유도한다. 공간뼈대구조를 유한요소로 나누어 요소의 변위장을 요소변위 벡터에 관한 Hermitian다항식으로 나타내고 이를 평형방정식에 대입함으로써 탄성 및 가하학적인 강도행렬을 유도한다. 또한 updated Lagrangian co-rotational formulation에 근거하여, 증분변위로부터 강체회전변위와 순수변형성분을 분리시켜서 강체회전은 요소의 방향변화를 결정하고, 순수변형은 부재력증분을 산정하는 불평형하중 산정법을 제시한다. 공간뼈대구조의 횡-비틂좌굴 및 후좌굴 거동에 대한 예제들을 통하여 본 연구에 대한 해석결과와 문헌의 결과를 비교 검토함으로써 본 연구에서 제시된 이론 및 해석방법의 정당성을 입증한다.