• Tribology and Lubricants
• /
• 제35권6호
• /
• pp.323-329
• /
• 2019

Sapphire is currently used as a substrate material for blue light-emitting diodes (LEDs). The market for sapphire substrates has expanded rapidly as the use of LEDs has extended into various industries. However, sapphire is classified as one of the most difficult materials to machine due to its hardness and brittleness. Recently, a lap-grinding process has been developed to combine the lapping and diamond mechanical polishing (DMP) steps in a single process. This paper studies, the effect of wafer surface roughness on the chemical mechanical polishing (CMP) process by pressure and abrasive concentration in the lap-grinding process of a sapphire wafer. In this experiment, the surface roughness of a sapphire wafer is measured after lap-grinding by varying the pressure and abrasive concentration of the slurry. CMP is carried out under pressure conditions of 4.27 psi, a plate rotation speed of 103 rpm, head rotation speed of 97 rpm, and slurry flow rate of 170 ml/min. The abrasive concentration of the CMP slurry was 20wt, implying that the higher the surface roughness after lapgrinding, the higher the material removal rate (MRR) in the CMP. This is likely due to the real contact area and actual contact pressure between the rough wafer and polishing pad during the CMP. In addition, wafers with low surface roughness after lap-grinding show lower surface roughness values in CMP processes than wafers with high surface roughness values; therefore, further research is needed to obtain sufficient surface roughness before performing CMP processes.

• 한국컴퓨터정보학회논문지
• /
• 제15권10호
• /
• pp.27-34
• /
• 2010

본 논문은 물리적 제약이 없는 자연스러운 인터페이스에서 획득한 장문영상을 효과적으로 인식하는 방법을 제안한다. 손의 위치 이동이나 회전으로 인하여 손바닥 영상에서 관심영역의 위치나 방향이 다양하게 나타나므로, 장문인식을 위해서는 안정적인 관심영역 추출이 필요하다. 본 논문은 검지와 중지, 소지와 약지 사이의 손 가랑이 구간의 중심점을 기준으로 관심영역을 추출하는 방법을 제시하고, 국부 이진패턴 히스토그램을 이용한 장문인식 방법을 제안한다. 제안된 방법의 성능을 측정하기 위하여 100인으로부터 획득한 총 1,597개의 장문영상을 대상으로 실험을 수행하였다. 실험 결과 ROI 추출 성공률이 99.5%였고, 장문인식 성능을 보여주는 동일오류율과 결정계수 d'를 측정한 결과 각각 0.136, 3.539를 보였다. 이러한 결과는 제안된 방법이 손의 위치나 회전 변형에 강인함을 나타낸다.

• 대한기계학회논문집A
• /
• 제39권2호
• /
• pp.169-177
• /
• 2015

내접형 기어펌프에 사용되는 지로터의 경우, 소결 공정기술의 발달로 복잡한 형상의 가공이 용이하며 내구성과 소형화의 장점이 있으나, 자동차의 연비효율 개선을 위한 유량증대 및 소음저감을 위한 연구가 요구되고 있다. 본 논문에서는 기존의 병진이동에 의한 지로터 치형의 형상조합 알고리즘이 가지는 형상 불연속성을 개선하기 위하여 회전이동 및 병진이동을 이용한 형상조합 알고리즘을 개발하였으며, 이를 토대로 개발된 설계 프로그램을 이용하여 3-타원이 조합된 경우와 타원 1-인벌루트-타원 2 이조합된 경우에 대해 치형형상을 도출하고, 형상에 따른 로터의 주요성능(유량, 유량맥동, 미끄럼률 및 압력각)을 계산하였다. 해석결과를 토대로 조합된 치형형상에 대한 최적설계를 수행하였으며, 기존 치형과의 성능 비교를 통하여 설계의 타당성을 검증하였다.

• 대한기계학회논문집A
• /
• 제35권10호
• /
• pp.1347-1353
• /
• 2011

마찰교반용접은 일반적인 용접법에 비하여 기계적 성질, 용접결함의 감소, 재료 절감 그리고 짧은 생산시간과 같은 장점 때문에 제작공정에 광범위하게 사용되고 있다. 본 연구의 목적은 이전의 실험 결과를 이용하여 마찰교반용접의 최적 조건을 검토하고 최적의 마찰용접조건에서 접합된 7075-T651 알루미늄 판재의 3가지 다른 영역, 즉 용접재, 열영향부재 그리고 모재에 대한 피로균열전파의 거동을 고찰하는 것이다. 최적의 마찰교반용접조건은 회전속도 800rpm, 이송속도 0.5mm/sec로 결정되었으며, 최적의 마찰교반용접에서 용접된 시험편에 대한 피로균열전파율은 3가지 영역의 재질, 즉 용접재, 열영향부재, 모재와 균열의 구동력에 크게 의존함을 보였다.

• 대한지역사회영양학회지
• /
• 제12권5호
• /
• pp.569-582
• /
• 2007

This study was carried out to examine information regarding usage of health improving agents and health status of male workers in the Chonnam Yeosu industrial area. We obtained data by means of a questionnaire from 329 men. Of the subjects 44.7% were in their forties, high school education was 43.0%, married was 83.0% and $1,500{\sim}3,000$ thousand won in monthly income was 35.8%. Average height and weight of the subjects was $171.8{\pm}5.4 cm$ and $70.5{\pm}8.1 kg$. Average BMI was $23.8{\pm}2.2$. Drinking rate of respondents was 85.5%, the drinking rate of daily workers was significantly higher than rotation workers (p < 0.05). Rotation workers exercised more regularly than daily workers (p < 0.001). Subjective symptoms of the subjects always had eye problems (11.7%), shoulder aches (5.8%), ache in one's empty stomach (4.7%) in decreasing order. 21.4% of the subjects had a disease, and liver disease was the highest in the subjects; the second was cardio-vascular disease. Interval of health food intake was highly irregular (62.7% of respondents), and keeping healthy was the main motivation fur the usage of health foods. Health improving agents included oriental medicine, animal protein based restorative foods, nutrition supplements, health supplements, and natural foods. 33.3% of the subjects took health supplements, nutrition supplements (29.1%), oriental medicine (20.6%), natural foods (16.7%) and animal protein based restorative foods (3.9%), in respective order. Health improving agents were consumed higher in liver disease than other diseases. This study suggests that nutritional education and monitoring should be implemented for industrial workers to prevent life-habit diseases and to keep proper self-management of health status under special environments.

• 한국통신학회논문지
• /
• 제19권12호
• /
• pp.2409-2417
• /
• 1994

직교 이중회전 디지털 격차 필터는 고밀도 집적회로 실현에 아주 적합한 성질들을 가지고 있다. 예를 들면, 바로 옆의 프로세서들과만 연결되는 점, 규칙적인 구조를 갖는 점, 그리고 파이프라인화 할 수 있다는 점 등이다. 또한 이 필터들은 유한 워드 길이로 실현했을 때 좋은 수치적 성질을 갖는다는 것이 잘 알려져 있다. 비록 이 필터들은 '컬셋 분리 절차'를 이용하여 파이프라인화 될 수 있지만 이렇게 파이프라인화 된 필터는 귀환회로의 계산 시간에 의해 이 필터의 최대 데이터 처리속도가 제한된다는 단점이 있다. 본 논문에서는 귀환회로에 제한 받지 않고 원하는 만큼 데이타 속도를 높이거나 저파워 실현을 위한 직교 이중회선 디지탈 격차 필터의 새로운 파이프라인 방법을 제안하였다. 이 방법은 Schur 알고리즘, 필터 합성시 특정한 제약을 주는 필터 합성 방법, 그리고 다중 페이스 분해 방법에 근거하고 있다.

• 대한간호학회지
• /
• 제9권2호
• /
• pp.73-83
• /
• 1979

The objectives of this study have been conducted to establish effective clinical teaching program to I.C.U in terms of proper assignment of the clients for the students, proper rotation schedule, priorities in critical nursing problems and selection of the teaching and learning. We have analyzed statistically 1,850 patients who have been admitted during a period from January 1977 to October 31 1979 in Ewha Woman's University Hospital. The results are as follows: 1. The proportion to the total inpatients number was 6.5% and mortality rate was 16.3%. 2. The average hospitalized days were 5.8 days in I.C.U and the total death was occured from 1 st hospital day to 5th hospital day. So it shows a certain difficulties for clinical experiences of the senior students in I.C.U. 3. In the age of the death, 41.3% of the patients were in the 41-60 year age group. It shows highest mortality rate in socially active and productive age groups. 4. The mortality rates of the departments of the medicine was 18.7%, general surgery 18.5%, and neurosurgery 14.7%. 5. The number of patients admitted to the department of neurosystem was 30.6%, cardiovascular system 22.6%, respiratory system 11.1 ％ and urinary system 2.9%. 6. On utilizing instruments and machine for diagnosis and client's assessment in I.C.U, they have utilized everything a usual. But they never utilize angiogram and cardiac catheterization in cardiovascular system, and retroperitoneal pneumography in the urologic system. Further more we would recommend as follows 1. In consideration of the average hospital days and the date of death, the rotation program for clincal experience need to be adjusted as continuing practice program in apposite to current alternative practice program for comprehensive nursing care. 2. Socioeconomic needs for the patient's families and himself should be emphasized by the students in addition to physical needs. 3. Course content for critical care might be built up in considering of core disease centered nursing problems. 4. The diagnostic procedures and client's assessment items which could not experience in our university hospital by the students might be considered and refilled as filled trips to another hospital and visual aids.

• 한국산학기술학회논문지
• /
• 제18권2호
• /
• pp.31-37
• /
• 2017

본 연구는 오존 방식 선박평형수 처리의 주요 장치인 기체-액체 이젝터에 대하여 구동 노즐의 유입부에 회전 운동 유도 장치에 의해 발생되는 구동 유체의 회전 운동이 이젝터 효율에 미치는 영향에 관한 연구이다. 먼저 배압에 따른 이젝터의 각 포트별 압력과 흡입 유량을 확인하기 위하여 실험 장치를 구성하고, 회전 운동이 없는 이젝터에 대한 실험 수행 및 데이터를 획득한다. 실험의 데이터를 바탕으로 격자 사이즈 비교를 통해 기체-액체 이젝터에 적합한 유한요소모델을 선정하였으며, 도출된 CFD 모델을 이용하여 구동 유체의 회전 운동이 이젝터의 흡입 효율을 향상시킬 수 있음을 확인하였다. 이를 바탕으로 이젝터의 흡입 유량을 높이기 위하여, 메타 모델을 이용한 크리깅 기법을 사용하여 회전 유도 장치의 내부 형상 인자인 전체 길이 l, 내부 직경 d, 날개 개수 n에 대한 구조 최적화를 수행한다. 최적화된 회전 유도 장치를 적용한 결과 구동 유체의 회전 운동이 없는 이젝터에 비해 이젝터 효율이 약 3% 가량 개선됨을 확인하였다.

• Tribology and Lubricants
• /
• 제40권2호
• /
• pp.54-60
• /
• 2024

This study experimentally identifies the effects of end shape, clearance, total damper length, journal eccentricity ratio, oil supply pressure, and oil flow rate on the damping coefficient of a squeeze film damper (SFD) with piston ring seal ends and a central groove. The SFD is composed of a lubricating fluid flowing between the outer race of a rolling element bearing and cartridge, along with an anti-rotation pin to prevent the rotation of the outer race. The device provides additional viscous damping to a rotating system. Additionally, piston ring seals attached at both ends of the damper increase the damping coefficient of the rotating system by reducing oil leakage. Because these different design conditions affect the damping coefficient of an SFD, we perform experiments including different conditions. Tests show that the damping coefficient increases significantly in the SFD with piston ring seal ends compared with the SFD with open ends. The damping coefficient also increases with increasing total damper length and journal eccentricity ratio, and decreases with increasing clearance. Additionally, in contrast to the trend observed for the SFD with open ends, the damping coefficient for the SFD with piston ring seal ends increases with increasing supply pressure and flow rate as the frequency decreases but shows consistent results as the frequency increases.

• 천문학회지
• /
• 제29권spc1호
• /
• pp.63-64
• /
• 1996

The nature of distant faint blue field galaxies remains a mystery, despite the fact that much attention has been devoted to this subject in the last decade. Galaxy counts, particularly those in the optical and near ultraviolet bandpasses, have been demonstrated to be well in excess of those expected in the 'no-evolution' scenario. This has usually been taken to imply that galaxies were brighter in the past, presumably due to a higher rate of star formation. More recently, redshift surveys of galaxies as faint as B$\~$24 have shown that the mean redshift of faint blue galaxies is lower than that predicted by standard evolutionary models (de-signed to fit the galaxy counts). The galaxy number count data and redshift data suggest that evolutionary effects are most prominent at the faint end of the galaxy luminosity function. While these data constrain the form of evolution of the overall luminosity function, they do not constrain evolution in individual galaxies. We are carrying out a series of observations as part of a long-term program aimed at a better understanding of the nature and amount of luminosity evolution in individual galaxies. Our study uses the luminosity-linewidth relation (Tully-Fisher relation) for disk galaxies as a tool to study luminosity evolution. Several studies of a related nature are being carried out by other groups. A specific experiment to test a 'no-evolution' hypothesis is presented here. We have used the AUTOFIB multifibre spectro-graph on the 4-metre Anglo-Australian Telescope (AAT) and the Rutgers Fabry-Perot imager on the Cerro Tolalo lnteramerican Observatory (CTIO) 4-metre tele-scope to measure the internal kinematics of a representative sample of faint blue field galaxies in the red-shift range z = 0.15-0.4. The emission line profiles of [OII] and [OIII] in a typical sample galaxy are significantly broader than the instrumental resolution (100-120 km $s^{-l}$), and it is possible to make a reliable de-termination of the linewidth. Detailed and realistic simulations based on the properties of nearby, low-luminosity spirals are used to convert the measured linewidth into an estimate of the characteristic rotation speed, making statistical corrections for the effects of inclination, non-uniform distribution of ionized gas, rotation curve shape, finite fibre aperture, etc.. The (corrected) mean characteristic rotation speed for our distant galaxy sample is compared to the mean rotation speed of local galaxies of comparable blue luminosity and colour. The typical galaxy in our distant sample has a B-band luminosity of about 0.25 L$\ast$ and a colour that corresponds to the Sb-Sd/Im range of Hub-ble types. Details of the AUTOFIB fibre spectroscopic study are described by Rix et al. (1996). Follow-up deep near infrared imaging with the 10-metre Keck tele-scope+ NIRC combination and high angular resolution imaging with the Hubble Space Telescope's WFPC2 are being used to determine the structural and orientation parameters of galaxies on an individual basis. This information is being combined with the spatially resolved CTIO Fabry-Perot data to study the internal kinematics of distant galaxies (Ing et al. 1996). The two main questions addressed by these (preliminary studies) are: 1. Do galaxies of a given luminosity and colour have the same characteristic rotation speed in the distant and local Universe? The distant galaxies in our AUTOFIB sample have a mean characteristic rotation speed of $\~$70 km $s^{-l}$ after correction for measurement bias (Fig. 1); this is inconsistent with the characteristic rotation speed of local galaxies of comparable photometric proper-ties (105 km $s^{-l}$) at the > $99\%$ significance level (Fig. 2). A straightforward explanation for this discrepancy is that faint blue galaxies were about 1-1.5 mag brighter (in the B band) at z $\~$ 0.25 than their present-day counterparts. 2. What is the nature of the internal kinematics of faint field galaxies? The linewidths of these faint galaxies appear to be dominated by the global disk rotation. The larger galaxies in our sample are about 2"-.5" in diameter so one can get direct insight into the nature of their internal velocity field from the $\~$ I" seeing CTIO Fabry-Perot data. A montage of Fabry-Perot data is shown in Fig. 3. The linewidths are too large (by. $5\sigma$) to be caused by turbulence in giant HII regions.