• Title/Summary/Keyword: root surface

Search Result 1,417, Processing Time 0.031 seconds

Scanning Electron Microscopic Study of the Effect of EDTA on Demineralizing Diseased Root Surface (EDTA가 치근면 탈회에 미치는 효과에 대한 주사전자현미경적 연구)

  • Han, Ji-Young;Lee, Man-Sup;Park, Joon-Bong;Herr, Yeek
    • Journal of Periodontal and Implant Science
    • /
    • v.29 no.4
    • /
    • pp.847-863
    • /
    • 1999
  • The present study was performed to evaluate the effect of EDTA on diseased root surfaces with regard to the removal of the smear layer, exposure of dentinal tubule openings, and demineralization of the peritubular dentin. 20 periodontally involved single rooted teeth were used. After scaling and root planing, root conditioning was carried out with 3%, 17%, and 24% EDTA solution for 20 sec., 3 min., and 5 min. respectively. Then, the specimens were rinsed with tap water for 5 min. and processed for scanning electron microscopic observation. The following results were obtained. 1. In control group which was conditioned with cotton pellets soaked with saline for 3 min., the surface showed an amorphous irregular coating. The tubule orifices seemed to be com-pressed in the direction of the curette strokes. 2. In test group which was conditioned with EDTA solution, the number of opening dentinal tubules and the extent of the dentinal tubule opening increased with time irrespective of the concentration of EDTA solution. 3. In the group which was conditioned with EDTA solution for 20 sec., the smear layer was not completely removed. 4. If the time of root conditioning is above 3 min., collagen-like fibers covering the circum tubular dentin surface were shown even in the group which was conditioned with 3% EDTA solution. In conclusion, EDTA solution was a very effective root conditioning agent like low pH root conditioning agents which had various disadvantages. Therefore, using EDTA solution, more successful periodontal regeneration could be obtained.

  • PDF

Three dimensional photoelastic study on the initial stress distributions of alveolar bone when retracted by lingual K-loop archwire (Lingual K-loop archwire를 이용한 발치공간 폐쇄시 초기응력 분포에 대한 3차원 광탄성학적 연구)

  • Byun, Bo-Ram;Kim, Sik-Sung;Son, Woo-Sung
    • The korean journal of orthodontics
    • /
    • v.32 no.5 s.94
    • /
    • pp.343-353
    • /
    • 2002
  • This study was designed to investigate the stress distribution of alveolar bone in case of on masse retraction with lingual K-loop archwire using the 3-dimensional photoelastic stress analysis followed by stress freezing process. Lingual K-loop archwire which had loop in 15mm height was used and activated by retraction force of 350gm per each side. The results were as follows 1. Central incisor : As the closer side to crown, the larger tensile stress was distributed at both mesial and labial surfaces and the larger compressive stress was distributed at distal surface. As the closer side to root apex, the larger compressive stress was distributed at lingual surface. The compressive stress was distributed at root apex. 2. Lateral incisor : The tensile stress was distributed at the coronal side of mesial surface. The compressive stress was distributed at distal surface. As the closer side to crown, the larger tensile stress was distributed at labial surface. The tensile stress was distributed at coronal side and the compressive stress was distributed at apical side of lingual surface. The compressive stress was distributed at root apex. 3. Canine The tensile stress was distributed at coronal side and the compressive stress was distributed at apical side of mesial surface. The tensile stress was distributed at distal surface. As the closer side to crown, the larger tensile stress was distributed at both mesial and distal surfaces. The compressive stress was distributed at root apex. 4. Second premolar : The tensile stress was distributed at mesial surface. The compressive stress was distributed at coronal side and the tensile stress was distributed at apical side of distal surface. The compressive stress was distributed at coronal side of buccal surface. As the closer side to crown, the larger tensile stress was distributed at lingual surface. The compressive stress was distributed at root apex. 5. First molar . As the closer side to crown, the larger tensile stress was distributed at both mesial and distal surfaces. No stress was distributed at buccal surface and palatal root apex. As the closer side to crown, the larger tensile stress was distributed at both lingual surfaces. The compressive stress was distributed a4 buccal root apexes. 6. Second molar The compressive stress was distributed at all root apexes. As the closer side to crown, the larger compressive stress was distributed at both mesial and lingual surfaces, and the larger tensile stress at both distal and buccal surfaces. Transverse bowing effect was observed in on-masse retraction with lingual K-loop archwire, however vertical towing effect was not. Rather, reverse vortical bowing effect was developed.

TOPICAL APPLICATION OF TETRACYCLINE GEL IN SCALING AND ROOT PLANING (치석제거 및 치근활택술 시에 테트라싸이클린 젤의 국소적 도포)

  • Han, Soo-Boo;Lee, Jae-Il;Heo, Jeong-Mi;Chang, Mee-Kyung;Shim, Chang-Koo;Lee, Chul-Woo
    • Journal of Periodontal and Implant Science
    • /
    • v.23 no.3
    • /
    • pp.647-658
    • /
    • 1993
  • The purpose of this study is to examine the influence of 5% tetracycline(Tc) gel on healing of gingival tissue and change of diseased root surface when used with nonsurgical procedure. 7 patients with advanced periodontitis were received thorough scaling and root planning, followed by saline irrigation on 10 randomly selected control teeth and Tc gel application for 5 minutes with specifically designed plastic instrument of 10 test teeth in contralateral side. At 0, 1, 7, 14, and 21 days after treatment, biopsy and extraction were carried out. At day 7, Tc group showed decreased inflammation and delayed proliferation of pocket epithelium in comparison with control group which was continued for all experimental days. Scanning electron microscopic finding revealed demineralized and cleaned root surface with exposed dentinal tubules in Tc gel group. In the present study, clinically successful result is expected with combined use of nonsurgical periodontal therapy and intrapocket application of Tc gel.

  • PDF

Design of Time-varying Sliding Surface for Higher-order Uncertain Systems (고차 불확실 시스템을 위한 시변 슬라이딩 평면의 설계)

  • Kim, Ga-Gue;Choi, Bong-Yeol
    • Journal of the Korean Institute of Telematics and Electronics S
    • /
    • v.36S no.6
    • /
    • pp.37-44
    • /
    • 1999
  • In this paper, we present a new sliding surface with a time-varying repeated root for fast and robust tracking of higher-order uncertain systems. The repeated root is moved to target one with stabilizing the closed-loop time-varying system in sliding mode. This initial root is obtained so that shifting distance of the surface may be minimized with respect to an initial error, and the intercept is produced so that the surface may pass the initial error. Under the allowable input, fast shifting of the surface and movement of the repeated root enable the error convergence rate to be increased. The proposed sliding mode control makes the error always remain on the surface from the beginning, and therefore, the system is more insensitive to parameter uncertainties and external disturbances. In simulation, the effectiveness of the proposed method is proved by comparison with the conventional one.

  • PDF

Effect of Acidic Environment on the Push-Out Bond Strength and Surface Morphology of Tricalcium Silicate Materials (산성 환경이 Tricalcium Silicate 재료의 압출강도와 표면형태에 미치는 영향)

  • Park, Misun;Kim, Jaehwan;Choi, Namki;Kim, Seonmi
    • Journal of the korean academy of Pediatric Dentistry
    • /
    • v.43 no.2
    • /
    • pp.137-144
    • /
    • 2016
  • The aim of this study was to evaluate the effect of a range of acidic pH values on the push-out bond strength and surface morphology of tricalcium silicate materials: Biodentine$^{(R)}$, Theracal$^{(R)}$ and ProRoot MTA$^{(R)}$. The standardized lumens of root slices prepared from extracted single-root human teeth were filled with Biodentine$^{(R)}$, Theracal$^{(R)}$ and ProRoot MTA$^{(R)}$ according to manufacturer's instructions. The specimens were randomly divided into 4 groups (n = 20) for each material and then incubated for 4 days at $37^{\circ}C$; 3 acidic groups (butyric acid buffered at pH 4.4, 5.4, 6.4) and 1 control group (phosphate buffered saline solution at pH 7.4). The push-out bond strengths were then measured by using a universal testing machine and the surface morphology of each experimental group was analyzed by a scanning electron microscope. Biodentine$^{(R)}$ and Theracal$^{(R)}$ showed higher push-out bond strength compared with ProRoot MTA$^{(R)}$ after exposure to acidic pH values. A substantial change in the surface morphology of each material occurred after exposure to different pH values. In conclusion, the push-out bond strengths of Biodentine$^{(R)}$ and Theracal$^{(R)}$ are higher than the ProRoot MTA$^{(R)}$. Further the acidic environment weakens the push-out bond strength and microstructure of tricalcium silicate materials.

Optimization of the whole extract of Zarawand Mudaharaj (Aristolochia rotunda L.) root by Response Surface Methodology (RSM)

  • Ansari, MD Zakir;Sofi, Ghulamuddin;Hamiduddin, Hamiduddin;Ahmad, Haqeeq;Basri, Rabia;Alam, Abrar
    • CELLMED
    • /
    • v.11 no.3
    • /
    • pp.15.1-15.9
    • /
    • 2021
  • The chemical constitution of a drug has been accepted as an important basis for pharmacological action in Unani medicine. Various dosage forms have been developed on this concept, such as decoctions (Joshanda), infusions (Khesanda), extract (Rub / Usara), and syrup. Zarawand Mudaharaj (ZM.) / Aristolochia rotunda L. root was subjected to extraction process using Soxhlet's apparatus by using Response Surface Methodology (RSM) to design the number of random runs of the extracts with variation in the factors of temperature, the concentration of ethanol in water, time for extraction, for optimizing and maximizing the yield concentration. The data obtained, was analyzed with regression equation and ANOVA two-way summary to interpret the interaction of the factors for yield maximization. Minitab version 18 was used to design and analyze data. Validation of the optimum conditions for maximum yield of the whole extract of ZM. Root was carried out by re-run of the extract using the optimized conditions. The maximum yield percentage thus obtained using RSM was 20.87% whereas using these optimum conditions 21.35 % yield was obtained thereby validating the method. The association between the response functions and the process variables was identified by a three-factor recorded Box-Behnken design. In the present study RSM is used because itis a cheap and affordable method to optimize maximum yield percentage which may be reliably used by researchers. The study set in the surface conditions for ZM. root extraction by the Soxhlet apparatus for maximizing the yield percentage.

Blood clot stabilization after different mechanical and chemical root treatments: a morphological evaluation using scanning electron microscopy

  • Stefanini, Martina;Ceraolo, Edoardo;Mazzitelli, Claudia;Maravic, Tatjana;Sangiorgi, Matteo;Zucchelli, Giovanni;Breschi, Lorenzo;Mazzoni, Annalisa
    • Journal of Periodontal and Implant Science
    • /
    • v.52 no.1
    • /
    • pp.54-64
    • /
    • 2022
  • Purpose: This in vitro study was conducted to evaluate the effects of different debridement techniques and conditioning procedures on root surface morphology and blood clot stabilization. Methods: Two debridement techniques (curette [CU] vs. high-speed ultrasound [US]) and 2 conditioning procedures (ethylenediaminetetraacetic acid [EDTA] and phosphoric acid [PA]) were used for the study. Seven experimental groups were tested on root surfaces: 1) no treatment (C); 2) CU; 3) US; 4) CU+EDTA; 5) US+EDTA; 6) CU+PA; and 7) US+PA. Three specimens per group were observed under scanning electron microscopy (SEM) for surface characterization. Additional root slices received a blood drop, and clot formation was graded according to the blood element adhesion index by a single operator. Data were statistically analyzed, using a threshold of P<0.05 for statistical significance. Results: The C group displayed the most irregular surface among the tested groups with the complete absence of blood traces. The highest frequency of blood component adhesion was shown in the CU+EDTA group (P<0.05), while no differences were detected between the CU, US+EDTA, and CU+PA groups (P<0.05), which performed better than the US and US+PA groups (P<0.05). Conclusions: In this SEM analysis, EDTA and conventional manual scaling were the most efficient procedures for enhancing smear layer removal, collagen fiber exposure, and clot stabilization on the root surface. This technique is imperative in periodontal healing and regenerative procedures.

EFFECTS OF BONE MORPHOGENETIC PROTEIN ON THE HEALING OF PERIODONTIUM AFTER TOOTH REPLANTATION OF THE RAT (치아재식시 골형태형성단백이 치주조직 치유에 미치는 영향)

  • Kim, Ji-Sook;Park, Joon-Bong;Lee, Man-Sup;Kwon, Young-Hyuk;Cho, Kyoo-Sung
    • Journal of Periodontal and Implant Science
    • /
    • v.32 no.3
    • /
    • pp.501-521
    • /
    • 2002
  • The purpose of this study is to evaluate the influences of the bone morphogenetic protein (BMP) on the healing of periodontal ligament and alveolar bone after replantation of tooth, and to examine the possibility of its clinical application. 45 Sprague Dawley rats weighted about 100 gram were divided into 3 experimental groups by different dose of BMP. All the upper right and left 1st molar were extracted after 5 days feeding of 0.4% ${\beta}$-aminopropionitrile, and right molar were used as experimental group and left molar were used as control group. The root surface of experimental molar were treated with 25,50 and l00ng/ml of human recombinant Bone morphogenetic protein-4 (rh-BMP-4) with micropipet, and 1M Sodium hypochloride were used on control root surface. All the experimental animals were sacrificed as 1, 2, 4, 7 and 14 days after autoreplantation of upper 1st molar into their own position. The maxilla were disected included both side of 1st molar. The collected tissue were processed from demineralization to paraffin embeding as usual procedure, and the specimens were prepared with Hematoxylin-Eosin stain for the light microscopic evaluation. The results of this study were as follows : 1. There was no significant differences between control and experimental site on 1 and 2 days after replantation of tooth. In the case of 4th days, the evidence of tissue regeneration were observed on experimental site to compare the controls. New osteoid were revealed on high concentration of BMP at 7 days after replantation, and it became more obvious at 14 days, 2. The effect of the rh-BMP-4 coated on root surface was revealed slight influences for the prolifertion of cells of periodontium and tissue regeneration as dose-dependent pattern. 3. Bony ankylosis was observed between alveolar bone and root surface due to the remarkable amount of osteoid formation on the 14 days after replantation of root. In the conclusion, it was suggested that topical application of the rhBMP-4 on the root surface has influence on the periodontal ligament and alveolar bone. The application method of BMP on the root should be designed with calculation of proper concentration.

AN IN VITRO STUDY OF THE THERAPEUTIC EFFECT OF ARGON LASER IRRADIATION ON HYPERSENSITIVE ROOTS (과민성치근에 대한 Argon laser조사의 치료효과에 관한 실험적 연구)

  • Chang, Kap-Sung;Kim, Byung-Ok;Han, Kyung-Yoon
    • Journal of Periodontal and Implant Science
    • /
    • v.25 no.3
    • /
    • pp.668-678
    • /
    • 1995
  • In order to evaluate the therapeutic effect of argon laser irradiation on hypersensitive root, 60 mandibular premolars that had been extracted due to periodontal disease were treated by thorough scaling, root planing and root conditioning with tetracycline HCI(100mg/ml, 5 min.) for induction of hypersensitive root. Within middle one third of root mesial surface(30) or distal surface(30) was randomly irradiated by 0.5W-, 0.75W- and 1.0W-power for 2 minutes argon laser(HGM Inc., USA) with or without topical application of 1.23% acidulated phosphate fluoride gel(Pascal, USA). After all teeth were maintained in 2% methylene blue solution for 48 hours and cross-sectioned through irradiated surface of dried roots, methylene blue stained area was compared between irradiated side and nonirradiated side. Following results were obtained : 1. Methylene blue stained area was significantly less in the laser irradiated group than control group(p<0.05). 2. There was no significant difference in methylene blue stained area between 0.5W-power and 0.75W-power group(p>0.1) and between 0.75W-power and 1.0W-power group(p>0.1), but there was significant difference between 0.5W-power and 1.0W-power group(p<0.05). 3. There was no significant difference in methylene blue stained area between two groups with and without topical application of 0.12% acidulated phosphate fluoride gel(p>0.1). The results suggest that argon laser irradiation on hypersensitive root may reduce the hypersensitivity by obstruction of dentinal tubules.

  • PDF

Evaluation of the periodontal and pulpal healing of replanted rat molars with doxycycline root conditioning

  • Nam, Ok Hyung;Cheon, Kyounga;Kim, Mi Sun;Lee, Hyo-Seol;Choi, Sung Chul
    • Journal of Periodontal and Implant Science
    • /
    • v.49 no.3
    • /
    • pp.148-157
    • /
    • 2019
  • Purpose: This study aimed to evaluate periodontal and pulpal healing in replanted rat teeth, preserved under different storage conditions, with or without root conditioning using doxycycline. Methods: A total of 40 maxillary first molars extracted from 20 Sprague-Dawley rats were stored for different durations under different conditions (5 minutes in dry storage and 60 minutes in Hank's balanced salt solution [HBSS]) and subsequently replanted. The rats were divided into 2 groups based on the use of root surface treatment: the doxycycline group (root surface treated with doxycycline) and the control group (no doxycycline treatment). Eight weeks after replantation, the animals were sacrificed, and the teeth were evaluated using micro-computed tomography (micro-CT) and histomorphometric analysis. Results: In the micro-CT analysis, the doxycycline group showed the same rate of occurrence of periapical radiolucency as was observed in the control group, but a lower degree of root resorption in teeth replanted after 60 minutes of storage in HBSS (P<0.05). In the histomorphometric analysis, the doxycycline group exhibited no improvement in either pulpal or periodontal healing of the replanted tooth after 5 minutes of dry storage, but showed a lower grade of surface root resorption ($1.37{\pm}0.77$) and inflammatory resorption in the teeth stored for 60 minutes in HBSS ($1.33{\pm}0.71$). Conclusions: In conclusion, doxycycline improved the periodontal healing of replanted teeth stored for 60 minutes in HBSS, whereas doxycycline did not improve periodontal healing of replanted tooth after 5 minutes of dry storage. Within the limits of this study, doxycycline showed more favorable periodontal healing despite delayed replantation.