• Title/Summary/Keyword: root density

Search Result 726, Processing Time 0.022 seconds

Non-conductive Film Effect on Ni-Sn Intermetallic Compounds Growth Kinetics of Cu/Ni/Sn-2.5Ag Microbump during Annealing and Current Stressing (열처리 및 전류인가 조건에서 Cu/Ni/Sn-2.5Ag 미세범프의 Ni-Sn 금속간화합물 성장 거동에 미치는 비전도성 필름의 영향 분석)

  • Kim, Gahui;Ryu, Hyodong;Kwon, Woobin;Son, Kirak;Park, Young-Bae
    • Journal of the Microelectronics and Packaging Society
    • /
    • v.29 no.2
    • /
    • pp.81-89
    • /
    • 2022
  • The in-situ electromigration(EM) and annealing test were performed at 110, 130, and 150℃ with a current density of 1.3×105 A/cm2 conditions to investigate the effect of non-conductive film (NCF) on growth kinetics of intermetallic compound (IMC) in Cu/Ni/Sn-2.5Ag microbump. As a result, the activation energy of the Ni3Sn4 IMC growth in the annealing and EM conditions according to the NCF application was about 0.52 eV, and there was no significant difference. This is because the growth rate of Ni-Sn IMC is much slower than that of Cu-Sn IMC, and the growth behavior of Ni-Sn IMC increases linearly with the square root of time, so it has the same reaction mechanism dominated by diffusion. In addition, there is no difference in the activation energy of the Ni3Sn4 IMC growth because the EM resistance effect of the back stress according to the NCF application is not large.

Growth and Yield Response of Perilla Plants Grown under Different Substrates in Hydroponic System (잎들깨 수경재배에서 배지 종류에 따른 식물 생육 및 수량의 반응)

  • Shin, Minju;Jeong, Ho Jeong;Roh, Mi Young;Kim, Jin Hyun;Song, Kwan Jeong
    • Journal of Bio-Environment Control
    • /
    • v.31 no.4
    • /
    • pp.292-299
    • /
    • 2022
  • This study was conducted to analyze physical and chemical properties of horticultural substrates and response of hydroponically grown two cultivars of 'Namcheon' and 'Somirang' perilla by four different substrates: coir (chip:dust = 5:5), perlite, granular rockwool, and commercial mixed substrate (cocopeat:peatmoss:vermiculite:perlite: zeolite = 50:25:10:10:5). There were no significant differences in EC and pH according to substrates. Container capacity was the greatest in granular rockwool, and it showed appropriate levels in mixed substrate and coir. Air space was higher in coir and perlite than the other treatments. Bulky density reached a proper standard in all substrates excepting coir. The leaf length and width of 'Namcheon' indicated the most in mixed substrate, though the value of 'Somirang'was greatest in coir substrate. The leaf weight of both cultivars was highest in mixed substrate, and relatively low in coir and perlite. The total yield of leaves was separated by two groups: higher group, which are mixed substrate and granular rockwool, and lower group, which are coir and perlite. There was a large gap by 28% between these two groups. Therefore, this study suggests that substrates with high water holding capacity such as mixed substrate or granular rockwool are most suitable for the hydroponic cultivation of perilla, which require sufficient moisture supply to the root zone.

Efficiency of Closed Cutting Propagation Affected by Closed Periods, Leaflet Number and Photoperiod in Rose (Rosa hybrida) (밀폐 기간, 소엽수 및 광주기에 따른 장미의 밀폐삽목 번식 효율)

  • Yang, Gyeong Rok;Jung, Hyun Hwan;Park, Ki Young;Song, Kwan Jeong
    • Journal of Bio-Environment Control
    • /
    • v.31 no.3
    • /
    • pp.212-220
    • /
    • 2022
  • When it comes to single node leafy stem cuttings of rose (Rosa hybrida), environmental management such as air temperature, relative humidity, and light affect productivity. In order to investigate the effect of air temperature and relative humidity on the cutting success rate and rooted cuttings quality, a transparent airtight box was used to implement a closed system. We have also tried to find out the most effective photoperiod and the number of leaflets in closed system using artificial light (white LED, 104.0 µmol·m-2·s-1 photosynthetic photon flux density). The first experiment was conducted for a total of 6 weeks under 4 airtight period conditions. The number of roots and longest root length decreased as the airtight period increased. But there were no significant differences in the survival rate, shooting rate, and rooting rate according to airtight periods. In the second experiment the results indicated that survival and shooting rate were significantly affected by the photoperiod (0/24, 2/22, 4/20, 8/16, and 16/8 h), the number of leaflets (0, 2, and 4 leaflets) of the cuttings and their interaction. The survival rate was the highest in the 16-h day length and 4 leaflets. By considering survival rate and shooting rate with energy efficiency, the 8-h day length and 2 or 4 leaflets were judged to be the most effective.

Impact of lattice versus solid structure of 3D-printed multiroot dental implants using Ti-6Al-4V: a preclinical pilot study

  • Lee, Jungwon;Li, Ling;Song, Hyun-Young;Son, Min-Jung;Lee, Yong-Moo;Koo, Ki-Tae
    • Journal of Periodontal and Implant Science
    • /
    • v.52 no.4
    • /
    • pp.338-350
    • /
    • 2022
  • Purpose: Various studies have investigated 3-dimensional (3D)-printed implants using Ti6Al-4V powder; however, multi-root 3D-printed implants have not been fully investigated. The purpose of this study was to explore the stability of multirooted 3D-printed implants with lattice and solid structures. The secondary outcomes were comparisons between the 2 types of 3D-printed implants in micro-computed tomographic and histological analyses. Methods: Lattice- and solid-type 3D-printed implants for the left and right mandibular third premolars in beagle dogs were fabricated. Four implants in each group were placed immediately following tooth extraction. Implant stability measurement and periapical X-rays were performed every 2 weeks for 12 weeks. Peri-implant bone volume/tissue volume (BV/TV) and bone mineral density (BMD) were measured by micro-computed tomography. Bone-to-implant contact (BIC) and bone area fraction occupancy (BAFO) were measured in histomorphometric analyses. Results: All 4 lattice-type 3D-printed implants survived. Three solid-type 3D-printed implants were removed before the planned sacrifice date due to implant mobility. A slight, gradual increase in implant stability values from implant surgery to 4 weeks after surgery was observed in the lattice-type 3D-printed implants. The marginal bone change of the surviving solid-type 3D-printed implant was approximately 5 mm, whereas the value was approximately 2 mm in the lattice-type 3D-printed implants. BV/TV and BMD in the lattice type 3D-printed implants were similar to those in the surviving solid-type implant. However, BIC and BAFO were lower in the surviving solid-type 3D-printed implant than in the lattice-type 3D-printed implants. Conclusions: Within the limits of this preclinical study, 3D-printed implants of double-rooted teeth showed high primary stability. However, 3D-printed implants with interlocking structures such as lattices might provide high secondary stability and successful osseointegration.

The Effect of Smart Safety and Health Activities on Workers' Intended Behavior (스마트 안전보건활동이 근로자의 의도된 행동에 미치는 영향)

  • Choonhwan Cho
    • Journal of the Society of Disaster Information
    • /
    • v.19 no.3
    • /
    • pp.519-531
    • /
    • 2023
  • With the aim of preventing safety accidents at construction sites, the company aims to create safe behaviors intended through variables called smart safety and health activities to help reduce industrial accidents. Purpose: It analyzes how smart safety and health activities affect accidents caused by unsafe behavior and changes in worker behavior, which is the root cause, and verifies the hypothesis that it helps prevent safety accidents and protect workers' lives. Method: Smart safety and health activities were selected as independent variables (X), and intended safety and anxiety, which are workers' behavioral intentions, were set as dependent variables (Y), attitude and subjective norms, and planned behavioral control as parameters (M). Exploratory factor analysis, discriminant validity analysis, and intensive validity analysis of safety and health activities were used to analyze the scale's reliability and validity. To verify the hypothesis of behavior change, the study was verified through Bayesian model analysis and MC simulation's probability density distribution. Result: It was found that workers who experienced smart safety and health activities at construction sites had the highest analysis of reducing unstable behavior and performing intended safety behavior. The research hypothesis that this will affect changes in worker behavior has been proven, the correlation between variables has been verified in the structural equation and path analysis of the research analysis, and it has been confirmed that smart safety and health activities can control and reduce worker instability. Conclusion: Smart safety and health activities are a very important item to prevent accidents and change workers' behavior at construction sites.

The Effect of Ampelopsis japonica (Thunb.) Makino on Osteoclastogenesis and Expression of Osteoclast-Related Gene (백렴(白蘞)의 파골세포 분화 및 관련 유전자 발현 억제에 미치는 영향)

  • Hongsik Kim;Sumin Lee;Minsun Kim;Jae-Hyun Kim;Yejin Kang;Seoung Jun Kwon;Youngwoo Nam;Seungwoo Yoo;Hong-Seok Choi;SeonJin Huh;Youngjoo Sohn;Hyuk-Sang Jung
    • The Korea Journal of Herbology
    • /
    • v.38 no.5
    • /
    • pp.9-19
    • /
    • 2023
  • Objectives : Osteoporosis is a systemic skeletal disorder characterized by reduced bone mineral density and increased risk of fractures. Bisphosphonates and selective estrogen receptors, which are bone resorption inhibitors that are currently widely used as osteoporosis treatments, show serious side effects when administered for a long time. Research on bone resorption inhibitors that complement the problems of existing treatments is needed. The purpose of this study was to investigate the effect of inhibiting osteoclast differentiation and activity on the tuberous root of Ampelopsis japonica (Thunb.) Makino (AM). Methods : After extracting AM using distilled water and ethanol, the inhibitory effects of the two solvents on osteoclast differentiation were compared using the RANKL-induced in vitro experimental model and the TRAP assay kit. The impact of AM on bone resorption was investigated through the pit formation assay, and its effect on F-actin formation was assessed through fluorescent staining. Additionally, protein and mRNA expression levels of osteoclast differentiation markers (NFATc1, c-Fos, TRAP and ATP6v0d2) and resorption markers (MMP-9, CTK, and CA2) were analyzed via western blot and RT-PCR. Results : AM treatment significantly decreased the number of TRAP-positive cells and pit formation area. Furthermore, AM suppressed both the protein and mRNA expression of NFATc1 and c-Fos, key transcription factors involved in osteoclast differentiation and it downregulated the expression of osteoclast-associated genes such as TRAP, CTK, MMP-9, CA2, and ATP6v0d2. Conclusions : These results suggest that AM can inhibit bone resorption and osteoclast differentiation, indicating its potential for use in the treatment and prevention of osteoporosis.

Effect of Biodegradable Film Mulching on Soil Environment and Onion Growth and Yield (생분해성 멀칭필름이 토양환경과 양파 생육 및 수량에 미치는 영향)

  • Ji-Sik Jung;Do-Won Park;Hyun-Sug Choi
    • KOREAN JOURNAL OF CROP SCIENCE
    • /
    • v.68 no.3
    • /
    • pp.207-215
    • /
    • 2023
  • This study was compared the soil environment and growth and yield of onion (Allium cepa L.) treated with non-mulching (NM) and mulching polyethylene film (PEF) and two biodegradable films (BFI and BFII) commonly used in farmhouses. Visual observation confirmed the degradation of BFI and BFII films after 150 days after tansplanting (DAT). BFII increased light penetration into the films and reduced the weight maintenace after 180 DAT, with a high decompostion at 30 days after soil tilling. Soil moisture contents much fluctuated between -14 kP and - 0 kPa in NM plots, increasing the minimum soil temperature of BFI plots. Mulching treatments decreased soil organic matter contents but did not subtantially increase soil mineral nutrients, soil bulk density, and number of bacteria compared to those of NM plots. Onion root growth was increased by PEF and BFI treatments at an early growth stage, 60 DAT, with the most remarkable stem extension observed for PEF and BFI treatments after 150 DAT. PEF and BFI treatments increased the bulb's diameter, length, weight, and lodging at 180 DAT. BFI treatments exhibited a high portion of the "very large" category producing with 55.3 tons ha-1 based on the classification into bulb size, followed by PE (49.3 tons), NM (9.4 tons), and BFII treatments (2.7 tons) at 230 DAT.

Plant Parasitic Nematodes in Soybean in Korea and Their Importance Rating (국내 콩 기생성선충의 중요도 등급)

  • Kim, Donggeun;Choi, Insoo;Ryu, Younghyun;Huh, Changseok;Lee, Younsu
    • Korean journal of applied entomology
    • /
    • v.52 no.4
    • /
    • pp.327-333
    • /
    • 2013
  • Plant parasitic nematodes were isolated from 274 soil samples collected from soybean fields in Korea. Nematode importance rating in soybean is proposed based on this study and by reviewing other reports. Soybean cyst nematode, Heterodera glycines is the most important nematode species and rated as $1^{st}$ because it detected from 38%(range 25-51%) of soil samples with high density except Jeju province. Root-knot nematode, Meloidogyne spp. is rated $2^{nd}$ and is more widely distributed in southern provinces, Gyeongnam, Jeonnam, and Jeju province (detection rate ranged 16-44%). Pratylenchus is rated $3^{rd}$ and is more frequently detected from northern provinces such as Gyeonggi and Gangwon (detection rate ranged 10-13%). Helicotylenchus is rated $4^{th}$ and is particularly important in Jeju province (detection rate is 62% and numbers averaged 571 nematodes/$300cm^3$ soil), which is the main production area for sprouting soybean in Korea. Tylenchorhynchus, Paratylenchus, Criconema, Criconemoide, Mesocriconema, Ogma, Xiphinema, Paratrichodorus, and Trichodorus occur in low frequency and density, thus they are rated to $5^{th}$. We propose to delete following nematode genus from the list of soybean parasitic nematode in Korea because their parasitism on soybean is unconfirmed or negligible; Tylenchus, Aphelenchus, Aphelenchoides, Ditylenchus, Hirschmanniella immamuri, Basiria graminophila, Psilenchus, and Pseudhalenchus. Therefore, we revised 30 species in 16 genera as soybean parasitic nematodes in Korea. Importance rating is $1^{st}$ Heterodera glycines, $2^{nd}$ Meloidogyne spp., $3^{rd}$ Pratylenchus spp. and $4^{th}$ Helicotylenchus spp. especially in Jeju province.

Effect of Soil Water Potential on Pysico-Chemical Properties of Soil and Cucumber(Cucumis sativus L.) Growth (토양(土壤) 수분(水分)포텐셜이 오이(Cucumis sativus L.)생육(生育)과 토양(土壤) 이화학적(理化學的 ) 특성(特性)에 미치는 영향(影響))

  • Bum, In-Sook;Kim, Yong-Woong;Kim, Kwang-Sik;Kim, Kil-Yong;Sohn, Bo-Kyoon;Kim, Hyun-Woo
    • Korean Journal of Soil Science and Fertilizer
    • /
    • v.32 no.2
    • /
    • pp.171-181
    • /
    • 1999
  • A field experiments was carried out to investigate the physicochemical properties of soil and cucumber growth in vinyl house when irrigation point was made at 0.2, 1/3, 0.5 and 1.0 bar. The obtained results was summarized as follow: The taxonomic class of the soil used was loam and each content of the required water was 4.4, 7.3, 9.6 and 13.4 mm per each irrigation time at 0.2, 1/3, 0.5 and 1.0 bar treatments in spring culture, respectively. At 0.2 bar and 1.0 bar treatments, interval of irrigation was 2.3 and 14.8 day, the times of irrigation was 37 and 6, and total irrigation volume was 163.5 and 80.3 mm, respectively. After cucumber culture, pH, EC concentration and exchangeable K content of soil at 0.2 bar treatment was distributed near to the level of improvement target while EC, available $P_2O_5$ and exchangeable base content in other treatments were higher compared to improvement target. At 1.0 bar treatment, ratios of the solid and liquid phase were 44.9 and 27.1%, respectively, and bulk density was $1.26g\;cm^{-3}$ which was the highest among the treatments. At 0.2 bar treatment, the ratio of the solid and liquid phase was 41.7 and 22.8%, respectively, and bulk density was $1.09g\;cm^{-3}$ which was the lowest. The root length and radius at 0.2 bar treatment were best, while those at 1/3 bar were worst. At 0.2 bar treatment, the total yield was 7,269 kg and the weight of good products was 5,677 kg which was the highest among treatments. At 0.33 bar treatment, the yield was the lowest with the high ratio of deformity.

  • PDF

A Practical Application and Development of Carbon Emission Factors for 4 Major Species of Warm Temperate Forest in Korea (난대지역 주요 4개 수종의 탄소배출계수 개발 및 적용)

  • Son, Yeong Mo;Kim, Rae Hyun;Kang, Jin Taek;Lee, Kwang Su;Kim, So Won
    • Journal of Korean Society of Forest Science
    • /
    • v.103 no.4
    • /
    • pp.593-598
    • /
    • 2014
  • In this study, we developed the carbon emission factors for 4 major species of warm-temperate region in Korea, and tried to provide their carbon emissions and removals estimates using these carbon emission factors. We selected Castanopsis cuspidata, Camellia japonica, Quercus acuta and Quercus glauca as target species and derived their carbon emission factors. The basic wood density that serve as one of the carbon emission factors were 0.583 for Castanopsis cuspidata, 0.657 for Camellia japonica, 0.833 for Quercus acuta and 0.763 for Quercus glauca and their uncertainties ranged from 5.3 to 17.9%. Biomass expansion factors were calculated as well: 1.386 for Castanopsis cuspidata, 2.621 for Camellia japonica, 1.701 for Quercus acuta and 2.123 for Quercus glauca and associated uncertainties varied from 14.7 to 30.5%. Lastly root-shoot ratios for each species were also determined: 0.454 for Castanopsis cuspidata, 0.356 for Camellia japonica, 0.191 for Quercus acuta and 0.299 for Quercus glauca with the uncertainties lying within a range from 19.8 to 35.7%. These three carbon emission factors including basic wood density had the uncertainties of less than 40% recommended by FAO. Therefore the application of country-specific emission factors seemed to provide quite accurate estimates of carbon emissions and removals. The estimation of the carbon stored in the 4 species were also conducted which amounted to $186.10tCO_2/ha$ for Castanopsis cuspidata, $280.63tCO_2/ha$ for Camellia japonica, $344.04tCO_2/ha$ for Quercus acuta and $278.91tCO_2/ha$ for Quercus glauca and their annual carbon removals were $6.65tCO_2/ha/yr$, $6.25tCO_2/ha/yr$, $11.70tCO_2/ha/yr$ and $12.29tCO_2/ha/yr$, respectively. This systematic assessment of forest resources can be a reliable source of information for managing evergreen broadleaved forest in warm temperate regions and thus serve as useful data for effective decision-making to address vegetation zone shifts due to climate change.