• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1995년도 하계학술대회 논문집 C
• /
• pp.1168-1170
• /
• 1995

The purpose of this thesis is to fabricate the hexamethyldisiloxane thin film by plasma polymerization method, and to investigate the electric conduction characteristics of plasma polymerized thin film. Current density was measured in being changed annealing temperature(room temperature${\sim}125[^{\circ}C]$) and electric field intensity($10^5{\sim}1.2{\times}10^6$[V/cm]). The current density of thin films fabricated at discharge power of $30{\sim}90$[W] showed $1.3{\times}10^{-11}{\sim}3.1{\times}10^{-12}[A/cm^2]$ after 10 minutes of permission of electric field. The current density increased gradually with increasing of annealing temperature and electric field intensity. The electric conduction type of thin films fabricated in discharge power of 90[W] agreed with Schottky type.

• Macromolecular Research
• /
• 제16권7호
• /
• pp.659-662
• /
• 2008

A new and useful poly(ethylene oxide)-based pH-sensitive block copolymer is introduced. Poly(ethylene oxide-b-N-phenylmaleimide) was first synthesized by anionic polymerization of N-phenylmaleimide (N-PMI) using mixed alkali metal polymeric alkoxide by sequential monomer addition method in the mixture of benzene/THF/DMSO (10/5/3, v/v/v) at room temperature. Reductive deimidation of the resulting block copolymer was performed using hydrazine monohydrate leading to the formation of the corresponding pH-sensitive poly(ethylene oxide-b-maleic acid).

• 한국세라믹학회지
• /
• 제42권8호
• /
• pp.593-598
• /
• 2005

Polycarbosilane was synthesized by the Kumada rearrangement of polydimethylsilane in the presence of zeolite (ZSM-5) as a catalyst at $350^{\circ}C$. The prepared polycarbosilane had very low molecular weight ($M_w=500$), so that it was not suitable to fabricate SiC fiber by melt spinning. Further polymerization of PCS was conducted around $400^{\circ}C$ to obtain spinnable polycarbosilane. After polymerization, the polycarbosilanes were isolated by distillation according to the molecular weight distributions. The PCS with a controlled molecular weight distribution was spun into continuous polycarbosilane green fibers. The PCS green fiber was successfully transformed into silicon oxycarbide fiber. The room temperature strength of the SiC fiber was around 1.5 - 1.8 GPa. The oxidation behavior and the tensile strength after oxidation were also evaluated.

• 구강회복응용과학지
• /
• 제16권2호
• /
• pp.123-132
• /
• 2000

The field of maxillofacial prosthetics is concerned with the prosthetic reconstruction of missing head and neck tissue. Currently, facial prostheses are usually applied in cases of defects caused by the surgical removal of tumors or congenital defects. While silicone has been most widely used for the reconstruction of missing maxillofacial defects, it does not have ideal physical properties. Therefore, bonding a thin polyurethane sheet to silicone prostheses was recommended. In this case skin adhesives were used for the retention of maxillofacial prostheses. But retention of devices has always been problematic. The contributions of implants can be made to solve these problems. Implants have reduced the need for adhesive use, simplifying cleaning procedures and thus extending the life of the prostheses. For implant-retained prostheses, retentive matrix is necessary to hold attachments and/or magnets. The retentive matrix is usually fabricated with autopolymerizing acrylic resin or visible light- polymerized resin. The purpose of this study was to compare the adhesion-in-peel force of silicone adhesive to autopolymerizing acrylic resin and polyurethane sheet with two different surface textures : pumice polish only or retention groove, and three surface primers : Dow corning 1205 primer or Dow corning S-2260 primer or FactorII A-304 primer, and two polymerization methods : room temperature or dry heat oven. The t-peel bond strength of specimens was determined as described in ASTM Standard D1876-72. The results were statistically analyzed using the ANOVA test, multiple range test and t-test The results were as follows. 1. The t-peel bond strength of A-304 primer was the highest and statistically higher than that of S-2260(p<0.05). 2. The t-peel bond strength of specimens with retention groove was statistically higher than that of specimens polished with pumice(p<0.05). 3. The t-peel bond strength of specimens polymerized in dry heat oven was statistically higher than that of specimens in room temperature(p<0.01).

• Composites Research
• /
• 제25권6호
• /
• pp.198-204
• /
• 2012

본 연구에서는 VARTM 공정으로 제조되는 에폭시/아바카 패브릭 복합재의 기계적 특성을 향상 시키고자 하였다. 표면처리를 통하여 패브릭 표면의 미세 거칠기를 증가시키고 친수성을 소수성으로 변화시켜 에폭시-패브릭간 계면결합력을 증가시켜 기계적 특성을 향상 시키고자 하였다. 이를 위해 상온 상압 플라즈마 처리법을 사용하였고 기계적 특성이 향상되는 최적 처리시간을 찾고자 하였다. 플라즈마 처리 특성을 비교하기 위해 NaOH 처리법을 사용하였다. 플라즈마 10초 처리된 패브릭으로 제조된 복합재가 무처리, NaOH 처리 대비 가장 높은 인장강도를 보였으며 20초 이상 처리시 인장강도는 낮아졌다. 미세구조 분석결과 20초 이상 처리시 섬유에 생긴 미세 흠집으로 인해 인장강도가 저하됨을 알 수 있었다. 흡습 시험과 침강 시험을 통해 친수성의 아바카가 소수성의 경향을 보이는 것을 확인하였다.

• 대한치과보철학회지
• /
• 제39권6호
• /
• pp.709-734
• /
• 2001

The aims of this experiment were to investigate the strain and temperature changes simultaneously within autopolymerzing acrylic resin specimens. A computerized data acquisition system with an electrical resistance strain gauge and a thermocouple was used over time periods up to 180 minutes. The overall strain kinetics, the effects of stress relaxation and additional heat supply during the polymerization were evaluated. Stone mold replicas with an inner butt-joint rectangular cavity ($40.0{\times}25.0mm$, 5.0mm in depth) were duplicated from a brass master mold. A strain gauge (AE-11-S50N-120-EC, CAS Inc., Korea) and a thermocouple were installed within the cavity, which had been connected to a personal computer and a precision signal conditioning amplifier (DA1600 Dynamic Strain Amplifier, CAS Inc., Korea) so that real-time recordings of both polymerization-induced strain and temperature changes were performed. After each of fresh resin mixture was poured into the mold replica, data recording was done up to 180 minutes with three-second interval. Each of two poly(methyl methacrylate) products (Duralay, Vertex) and a vinyl ethyl methacrylate product (Snap) was examined repeatedly ten times. Additionally, removal procedures were done after 15, 30 and 60 minutes from the start of mixing to evaluate the effect of stress relaxation after deflasking. Six specimens for each of nine conditions were examined. After removal from the mold, the specimen continued bench-curing up to 180 minutes. Using a waterbath (Hanau Junior Curing Unit, Model No.76-0, Teledyne Hanau, New York, U.S.A.) with its temperature control maintained at $50^{\circ}C$, heat-soaking procedures with two different durations (15 and 45 minutes) were done to evaluate the effect of additional heat supply on the strain and temperature changes within the specimen during the polymerization. Five specimens for each of six conditions were examined. Within the parameters of this study the following results were drawn: 1. The mean shrinkage strains reached $-3095{\mu}{\epsilon},\;-1796{\mu}{\epsilon}$ and $-2959{\mu}{\epsilon}$ for Duralay, Snap and Vertex, respectively. The mean maximum temperature rise reached $56.7^{\circ}C,\;41.3^{\circ}C$ and $56.1^{\circ}C$ for Duralay, Snap, and Vertex, respectively. A vinyl ethyl methacrylate product (Snap) showed significantly less polymerization shrinkage strain (p<0.01) and significantly lower maximum temperature rise (p<0.01) than the other two poly(methyl methacrylate) products (Duralay, Vertex). 2. Mean maximum shrinkage rate for each resin was calculated to $-31.8{\mu}{\epsilon}/sec,\;-15.9{\mu}{\epsilon}/sec$ and $-31.8{\mu}{\epsilon}/sec$ for Duralay, Snap and Vertex, respectively. Snap showed significantly lower maximum shrinkage rate than Duralay and Vertex (p<0.01). 3. From the second experiment, some expansion was observed immediately after removal of specimen from the mold, and the amount of expansion increased as the removal time was delayed. For each removal time, Snap showed significantly less strain changes than the other two poly(methyl methacrylate) products (p<0.05). 4. During the external heat supply for the resins, higher maximum temperature rises were found. Meanwhile, the maximum shrinkage rates were not different from those of room temperature polymerizations. 5. From the third experiment, the external heat supply for the resins during polymerization could temporarily decrease or even reverse shrinkage strains of each material. But, shrinkage re-occurred in the linear nature after completion of heat supply. 6. Linear thermal expansion coefficients obtained from the end of heat supply continuing for an additional 5 minutes, showed that Snap exhibited significantly lower values than the other two poly(methyl methacrylate) products (p<0.01). Moreover, little difference was found between the mean linear thermal expansion coefficients obtained from two different heating durations (p>0.05).

• Advances in materials Research
• /
• 제1권4호
• /
• pp.299-310
• /
• 2012

This article describes the synthesis of a novel N-substituted pyrrole monomer containing an azobenzene group. The 2-[N-ethyl-N-[4-[(4-nitrophenyl) azo]-phenyl] amino] ethyl-3-chloropropionate (RedII) compound was synthesized via reaction of 4-nitro-4'-[N-ethyl-N-(2-hydroxyethyl)-amino] azobenzene (RedI) and 3-chloropropionic acid. RedII was reacted with the potassium salt of pyrrole then 2-[N-ethyl-N-[4-[(nitro phenyl) azo] phenyl] amino] ethyl-N-pyrrolyl propionate (Py-RedII) was prepared. Chemical polymerization of Py-RedII and copolymerization of Py-RedII with pyrrole carried out using $FeCl_3$. Poly (2-[N-ethyl-N-[4-[(nitro phenyl) azo] phenyl] amino] ethyl-N-pyrrolyl propionate) (PPy-RedII) was characterized by UV, IR, $^1HNMR$, $^{13}CNMR$ spectroscopies. Electropolymerization of Py-RedII and electroco-polymerization of Py-RedII and pyrrole were studied using conventional three electrodes system, Ag/AgCl reference electrode, platinum counter electrode and GC disk working electrode. Scanning electron microscopy (SEM), thermogravimetry analysis (TGA) and differential scanning calorimetry (DSC) were used for thermal and rheological studies. The TGA curve of PPy-RedII demonstrated a high thermal stability up to 200°C and its DSC thermogram showed two endothermic peaks at 88 and $122^{\circ}C$. The glass transition temperature of the polymer was found to be above the room temperature. Electrical conductivities of PPy-RedII and it's copolymer with pyrrole (PPy-RedII-co-Py) were studied by the four-probe method and produced conductivities of $7.5{\times}10^{-4}$ and $6.5{\times}10^{-3}Scm^{-1}$, respectively.

• 폴리머
• /
• 제27권5호
• /
• pp.421-428
• /
• 2003

반응성 올리고머 및 메타아크릴레이트/SBS블렌드의 확산에 의해 제어되는 광중합 반응 특성을 ATR-FTR을 이용하여 고찰하였다. 광중합 속도는 반응 초기 단계에서는 자가 가속 현상을 보이며 반응 속도가 급격하게 증가하여 반응이 진행함에 따라 확산에 의한 반응 지연 현상이 관찰된다. 확산 제어항이 도입된 반응 기구 속도식으로 반응 속도를 해석한 결과 전체 반응 구간에서 실험 결과와 잘 일치하였다. SBS의 도입을 위해 사용된 반응성 용매인 N-비닐피롤리돈 (NVP)의 첨가에 의해서 최종 전환율에 이르는 시간은 거의 일정하였으나 전환율은 NVP의 높은 반응성으로 인하여 증가하는 경향을 보였다. 중합 반응 속도도 NVP 첨가에 의하여 증가하는 경향을 보였다. SBS의 첨가시 NVP-SBS의 함량이 10 phr까지는 동일한 전환율 거동을 보이나 NVP-SBS의 함량이 20 phr에서는 현저히 떨어지게 되는데 이는 NVP-SBS의 함량이 20 phr에서는 블렌드의 점도가 증가하여 반응에 영향을 주는 것으로 보인다. NVP-SBS의 함량이 증가함에 따라 중합 반응 속도는 점진적으로 감소함을 알 수 있었다. 메타아크릴레이트./SBS의 블렌드는 상온과 여러 높은 온도 범위에서 상분리가 관찰되지 않았으며 광중합 반응 후에도 투명한 준-IPN을 형성하여 성공적으로 필름 및 코팅에 적용할 수 있었다.

• 한국재료학회지
• /
• 제17권8호
• /
• pp.433-436
• /
• 2007

Nano-structured polyaniline have been synthesized by interfacial polymerization method at room temperature. An aqueous solution of aniline in chloroform and another solution of ammonium peroxydisulfate in doping acid were prepared at different times terminated with methanol at room temperature. SEM, UV-vis were used to characterize the polyaniline with regard to their morphology and structure. The diameter and length of polyaniline can be controlled by the reaction time. Nano-structured polyaniline were found to have superior sensitivity for volatile organic compounds(VOCs). As the reaction time to increase from 30minute to 2hours the sensitivity were decreased to VOCs vapors. The sensitivity of Nano-structured polyaniline sensor appeared to VOCs better than the sensitivity of chemical synthesis sensors. The sensitivity of Nano-structured polyaniline sensor improved benzene vapors.

• 대한치과보철학회지
• /
• 제34권4호
• /
• pp.833-849
• /
• 1996

The material of choice for functional and esthetic reconstruction of maxillofacial defects is silicone. Silicone has appropriate physical properties for maxillofacial prosthesis but it has weak edge strength. Therefore, a proper combination of silicone and polyurethane sheet is recommended to improve this weakness. Various primers are also used to enhance the adhesive strength between silicone and polyurethane sheet. The purpose of this study was to determine the adhesive strength of silicone and polyurethane sheet. Silicone elastomer mixture was made by admixing MDX4-4210 elastomer (40%) and Silastic Medical Adhesive Type A(60%). This silicone elastomer mixture was attached to polyurethane sheet, using one of three different primers(1205, S-2260, or A-304), treated for 1, 2, 4, 6, and 8 hours. These were then polymerized in room temperature, dry-heat oven or microwave oven. Six specimens per each group, a total of 270 specimens were prepared for final test. The differences of T-peel bonding strengths were then determined by a test. The differences of T-peel bonding strengths were then determined by a test method that was recommended by American Society for Testing and Materials C794-80. The results were statistically analyzed using the ANOVA and Mutiple Range Tests(Tukey' HSD). The reults were as follow. 1. Type of primer, primer reaction time, and methods of polymerization showed significant correlation on the T-peel bonding strengths in adhesiveness between silicone and polyurethane sheet. 2. A-304 primer showed statistically higher in T-peel bonding strength than otehr type of primers except for the polymerization in microwave oven with reaction times of 2, 6 hours(p<0.05). 3. No significant differences in T-peel bonding strength were observed among the polymerization methods. 4. The effect of reaction time by the primer type and polymerization method showed statistically significant differences in bonding strength among different reaction times. And in most cases, reaction time of 1 or 2 hours showed higher T-peel bonding strength.