• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2010년도 춘계학술대회 논문집
• /
• pp.2179-2194
• /
• 2010

RAMS is becoming increasingly important in the decision making process for the rolling stock projects in order to improve competitiveness by reducing system life cycle cost while improving reliability, availability, maintainability and safety. In order to apply and manage RAMS of rolling stock systems effectively in the operator perspective, it is essential to integrate and control RAMS systematically from the early stage of rolling stock projects. RAMS management is to implement a RAMS system into rolling stock projects in terms of a rolling stock operator, which presents the strategic directions of RAMS policy, objectives, requirements, control, analysis, measurement and improvement throughout life cycle of rolling stock projects. This article presents a new framework of RAMS management that provides an effective and efficient way for managing RAMS in rolling stock systems in the railway industry.

• 한국철도학회논문집
• /
• 제9권6호
• /
• pp.772-777
• /
• 2006

Three-dimensional numerical study is performed for the flow analysis around the rolling stock with square cross section (Mugungwha train model). The height (H) of rolling stock is considered as the characteristic length and the total length of rolling stock is 40 which correspond to 1/2 unit of rolling stock. The gap between the surface and rolling stock is 0.17H which is average value. The relative velocity between the surface and rolling stock is assumed to be zero and Re=10,000 based on the characteristic length. Low Re ${\kappa}-{\epsilon}$[15] is employed for the calculation of turbulence which resolve all the way to the solid surface (laminar sub-layer). Large flow separation occurred at the front head of train and a pair of vortex is generated on both top and side of rolling stock. The behavior of vortices on the top of the rolling stock is believed to affect the performance of the pantograph which should be intensively investigated. The difference between the high pressure in the front stagnation region of train and the low pressure in the rear separated region causes a large pressure drag. A large pair or vortex are generated in the rear of train and the size of vortex is increased more than the size of cross section of train.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 정기총회 및 추계학술대회 논문집
• /
• pp.2286-2291
• /
• 2011

Technology on the rolling stock is very composition and system engineering. We have to consider to many parameters on the rolling stock design. High speed train is interface between rolling stock and infra system of rail, signal, communication etc. For many years testing operation has experienced substantial growth based on various advanced new technology. Recently some problems was clearly stated on effective management, practical use and testing operation of the the rolling stock on the technology change. This paper presents some results of the study on necessary requirements of the operation testing for rolling stock technology change. We propose a general plan to suggest the operation testing and the parameters of the rolling stock on the technology change in the text.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2008년도 추계학술대회 논문집
• /
• pp.1782-1793
• /
• 2008

Republic of korea has begun operating high speed train service according as KTX service operation starts in 2004. Also, EMU whose maximum speed is over 150 kph will be starting to service with electrification and improvement of existing railroad. Moreover, metropolitan electric railways have begun an express service to increase scheduled speed. Therefore, running resistance of rolling stock becomes more important factor effects on the performance. Running resistance of rolling stock is the factor which is necessary for the performance or operation plan of rolling stock, and it's related to rolling friction, slip friction, drag force, gradient, acceleration, curvature, tunnel condition and so on. It is possible to be calculated by CFD (Computational Fluid Dynamics). However it is predicted by experimental equation from running resistance test because of the complex calculation and manifold variables. In this paper, studies about running resistance of rolling stock is introduced, and each term of experimental equation is studied through theoretical approximation. Also, running resistance of rolling stock is estimated by the result of running resistance test, and effects being related to friction, drag force, gradient is examined.

• 한국철도학회논문집
• /
• 제16권3호
• /
• pp.183-188
• /
• 2013

철도차량을 유지보수 하는 목적은 열차가 운행하는 동안 고장이 발생하지 않도록 하는 것이다. 최근의 철도차량은 전기전자 부품은 물론 IT기술이 접목되어 주기적인 예방정비 방식으로는 차량고장을 근본적으로 예방할 수 없게 되었다. 따라서 KTX에 RAMS가 적용되어 도입된 이후 코레일에서 도입하는 철도차량은 RAMS를 적용하고 있다. 새로 제작되는 차량은 운행초기 하자보증기간 동안 신뢰성 검증을 하게 되며, 유지보수 과정에서는 RCM 기법을 적용한다. 본 논문에서는 철도차량의 특성 및 운영 환경에 적합한 철도차량 신뢰성유지보수체계인 RCRM(Reliability Centered Rolling stocks Maintenance) 방안을 제시하고자 한다.

• 한국자동차공학회논문집
• /
• 제21권3호
• /
• pp.1-14
• /
• 2013

In this paper, a finite element analysis technique of rolling stock models for collision-induced derailments was suggested using rolling contacts for wheel-rail interaction. The collision-induced derailments of rolling stock can be categorized into two patterns of wheel-climb and wheel-lift according to the friction direction between wheel flange and rail. The wheel-climb derailment types are classified as Climb-up, Climb/roll-over and Roll-over-C types, and the wheel-lift derailment types as Slip-up, Slip/roll-over and Roll-over-L types. To verify the rolling contact simulations for wheel-rail interaction, dynamic simulations of a single wheelset using Recurdyn of Functionbay and Ls-Dyna of LSTC were performed and compared for the 6-typical derailments. The collision-induced derailment simulation of the finite element model of KHST (Korean High Speed Train) was conducted and verified using the theoretical predictions of a simplified wheel-set model proposed for each derailment type.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1997년도 하계학술대회 논문집 A
• /
• pp.373-375
• /
• 1997

In this paper, we present IGBT VVVF inverters as a 1C1M propulsion system for electric car. These inverters are composed of high power IGBT's and controlled by compact control units. The control unit performs full digital control by using 32bit DSP and microcontroller. By using CAN-bus, high speed network is constructed within four control units. The stack is simplified and optimized by using plate bus and IGBT driver units of hybrid-type.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2005년도 춘계학술대회 논문집
• /
• pp.163-168
• /
• 2005

In case of rolling stock, SEMS is generally applied in the advanced countries, but is start stage in our country. SEMS is defined the system engineering management system in order to achieve the optimized train performance among the several client requirements aspect of technical engineering management during the design life cycle. And the fire engineering activities in hong kong EMU project are introduced aspect of SEMS in this paper. The fire engineering at rolling stock in view of SEMS controls to apply the satisfied interior material by the fire safety standards (regulation of the commute urban subway safety guideline by the MOCT, BS 6853, NFPA 130, NF F 16-101) and to minimize the fire load in order that passengers egress safe from the fired rolling stock. The rolling stock in the advanced countries is designed to stand for 15-20 minutes in considering the rolling stock to be fired in tunnel. For passenger fire safety, the passenger evacuation provision and progress is set up.

• 유통과학연구
• /
• 제18권7호
• /
• pp.63-72
• /
• 2020

Purpose: This study examines the market segmentation and strategy of PT INKA, a rolling stock manufacturer in Indonesia. Research design, data and methodology: The study used the MCDM (Multiple Criteria Decision Making) method specifically the AHP (Analytical Hierarchy Process). The AHP method was applied to identify the target market. This method or approach considers the market attractiveness and competitive strength criteria with quantified parameters. Results: a) Australia, Kenya, Tanzania, New Zealand, and India emerge as the top five target markets; b) There is justification for rolling stock manufacturers to allocate their resources in winning the market share. Conclusion: The main challenge confronting the rolling stock manufacturer is limited resources to acquire a particular market share despite abundant opportunities in this sector. Despite the mastery of technology and long experience in the industry, selecting a target market with multiple criteria could be difficult for an emerging rolling stock manufacturer in South East Asia.

• 한국철도학회논문집
• /
• 제12권6호
• /
• pp.1049-1058
• /
• 2009

한국의 철도공장은 철도도입과 함께 설립되었고 근대기 산업건축의 중심이 되었다. 한국 철도공장의 대표적 사례인 용산공장에는 근대기 건물이 다수 현존하는데, 특히 규모를 잘 보존하고 있어 이를 중심으로 근대기 건물의 건축적 특성을 살펴보고자 한다. 한국의 철도공장은 입지조건이 적합한 곳에 건립되었고, 작업공정에 따른 시설 배치, 각각의 용도와 기능에 따른 독특한 구조 및 단면 입면의 형태를 갖고 있고 철골구조와 철근콘크리트 구조를 적극 도입하여 구조적 변환기로서의 특성을 보여주고 있다. 따라서 철도공장이 한국 근대 공장건축의 초기적 특성을 갖고 있고 한국 근대기의 산업건축유산으로써, 중요한 가치를 지닌 과제임을 밝히려 한다.