• Journal of the Korean Society of Earth Science Education
• /
• v.10 no.2
• /
• pp.226-234
• /
• 2017

The purpose of this study is to investigate the effect of the application of storytelling on pre-service teachers of elementary school who take courses in 'earth's strata and rock' on science teaching concept and science teaching efficacy. The experiment was aimed at one class (32 students) enrolled in the 'earth's strata and rock' course at intensive course through 15 weeks from March to June. The experiment was taking lectures of "earth's strata and rock" for one semester, and the pre-service teachers of elementary school finished class demonstration with storytelling technique by group. The results and analysis of the study were analyzed by the corresponding sample test in before and after the group test. The conclusion of the study is as follows. First, the application of storytelling method on pre-service teachers of elementary school was effective in science concept. teaching efficacy. Second, the application of storytelling method on pre-service teachers of elementary school was effective in science teaching efficacy. Third, the application of storytelling method on pre-service teachers of elementary school responded positively.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.7 no.1
• /
• pp.37-49
• /
• 2005

In a tunnel, failure of its supports can cause failure of the tunnel. Therefore it is important to estimate safety factor of the tunnel which the failure of its supports is taken into account. In previous studies, supports of tunnels were usually modelled as beam elements. The failure of the supports was decided by comparing the allowable stress and the calculated bending stresses inside the beam elements in estimating safety factor of the tunnel considering the failure of its supports. In this study, it is suggested how to model the supports properly. To this end, supports of a tunnel were modelled by both beam (elastic) elements and continuum (elasto-plastic) elements in two dimensional numerical analyses. Meanwhile, it was analyzed how rock mass class, coefficient of lateral pressure, shotcrete thickness, the existence of rock bolt, and excavation method had an effect on the safety factor of a tunnel.

• Journal of the Korean GEO-environmental Society
• /
• v.23 no.3
• /
• pp.5-13
• /
• 2022

In this study a test was conducted to identify weak section using 100kJ class rock energy to find out the protection performance of rockfall prevention fences in Korea. Performance rating of the rockfall protection fences is very low (48~61kJ) compared to that of foreign countries and it is necessary to determine whether it can function properly if high rock energy is generated. Furthermore, a reinforcing technology that can improve to 100kJ energy on the existing rockfall protection fences should be developed. Therefore, this study confirmed the protection performance using 100kJ rock energy in the existing rockfall protection fence system (for national road, for highway) and identified weak section of post, wire ropes and nets. Furthermore, it will be used as basic data for developing 100kJ class reinforcement technology without dismantling the existing rockfall protection fence (48-61kJ).

• Journal of Environmental Science International
• /
• v.24 no.11
• /
• pp.1431-1442
• /
• 2015

This study was carried out to systematically maintain and manage the trails by assessing the physical characteristics, the types of deterioration and impact rating class of trails located in Mt. Nam District of the Gyeongju National Park. The major trails followed 6 routes including Sambulsa-Geumobong(A), Yongjangsaji-Geumobong(B), Yongjanggol-Yiyoungjae-Gowibong(C), Cheonusa-Gowibong(D), Sangseojang-Forest road(E) and Tongiljeon-Forest road(F). The routes length of A was 2.2 km, 2.7 km of B, 3.4 km of C, 1.3 km of D, 2.0 km of E and 1.0 km of F. In the physical characteristics, A was the widest and F was the narrowest in the width and bared width of trail. In depth of erosion, B was the deepest and E was the shallowest. D was the steepest and E was the gentlest in the slope. In the results of analysing the types of deterioration, A were 13 types, 11 types of B, C and D, 10 types of E and 6 types of F. The times of appearance of deterioration types in A were 86 times, 75 times of B, 105 times of C, 48 times of D, 47 times of E and 13 times of F. In case of the impact rating class, trail erosion was II degree, I degree of trail expansion, root exposure, trail divergence and rock exposure.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.3 no.1
• /
• pp.21-26
• /
• 2001

Till now a lot of studies has been performed to increase the efficiency of tunnel blasting. Nevertheless there are still uncertainties of input parameter to determine the specific charge. In order to solve this problem, the rock types and the charges of 17 road tunnel sites were analyzed. As a result of these analyses an empirical formula depending on rock type and charge was developed. Through this formula rational tunnel blasting will be designed by quantitative method rather than by assumption.

• Explosives and Blasting
• /
• v.35 no.4
• /
• pp.27-35
• /
• 2017

A total of 22 sites around openings of limestone mine are chosen to assess rock mass classification schemes such as RMR, Q-system, and GSI. RMR and Q are modified to estimate the relationship with GSI. Q' is the modified Q with SRF=1.0 and $J_w=1.0$. Rock mass is assumed to be completely dry and very favorable discontinuity orientations are assumed to estimate ${RMR_{89}}^{\prime}$. Relationships of Q-Basic RMR, Q-Total RMR, ${GSI-RMR_{89}}^{\prime}$, and GSI-Q' are analyzed, in which a correlation of ${GSI-RMR_{89}}^{\prime}$ is found to be the highest. Failure strains are calculated using the modulus ratios and most measuring sites appear to be stable with low failure strain class.

• Geomechanics and Engineering
• /
• v.30 no.1
• /
• pp.75-91
• /
• 2022

This paper aims to show how to use several Machine Learning (ML) methods to estimate the TBM penetration rate systematically (TBM-PR). To this end, 1125 datasets including uniaxial compressive strength (UCS), Brazilian tensile strength (BTS), punch slope index (PSI), distance between the planes of weakness (DPW), orientation of discontinuities (alpha angle-α), rock fracture class (RFC), and actual/measured TBM-PRs were established. To evaluate the ML methods' ability to perform, the 5-fold cross-validation was taken into consideration. Eventually, comparing the ML outcomes and the TBM monitoring data indicated that the ML methods have a very good potential ability in the prediction of TBM-PR. However, the long short-term memory model with a correlation coefficient of 0.9932 and a route mean square error of 2.68E-6 outperformed the remaining six ML algorithms. The backward selection method showed that PSI and RFC were more and less significant parameters on the TBM-PR compared to the others.

• The Journal of Korean Academy of Prosthodontics
• /
• v.56 no.4
• /
• pp.295-301
• /
• 2018

To obtain denture retention, support, and stability in Class III edentulous cases with flat alveolar ridges and extensive flabby tissue is very difficult. The patient was a 72-year-old male who wore ill-fitting 20 year old dentures made by non-medical institutions. There was flabby tissue on the maxillary anterior ridge. The patient showed Angle Class III skeletal relationship with severe protruded mandible. First, temporary dentures were fabricated to restore the masticatory function, and final dentures were made through non- pressure impression technique and careful the arrangement of the posterior resin teeth. Improvement of the retention and stability of the denture during the occlusal force application is reported.

• Journal of Korean Society of Forest Science
• /
• v.103 no.2
• /
• pp.233-239
• /
• 2014

This study was carried out to propose the criteria for the prediction of landslide occurrence through analysis the influence of each factor by using the quantification theory. The results obtained from this study are summarized as follows. From a stepwise regression analysis between the landslide area($m^2$) and environmental factors, the factors strongly affecting the landslide sediment($m^2$) were the Parents rock (igneous), cross slope(complex), coniferous forests (forest type) and slope gradient ($21{\sim}30^{\circ}$). According to the range, it was shown in order of Cross slope (0.2922), Parents rock (0.2691), Forest type (0.2631) and Slope gradient (0.2312). The range of prediction score of landslide occurrence has been distributed between score 0 and score 1.0556, the median value was score 0.5278. The prediction for class I was over 0.7818, for class II was 0.5279 to 0.7917, for class III 0.2694 to 0.5278 and for class IV was below 0.2693. The prediction on landslide occurrence appeared relatively high accuracy rate as 72% for class I and II. Therefore, this score table for landslide will be very useful for judgement of dangerous slope.

• Journal of Korean Society for Geospatial Information Science
• /
• v.19 no.1
• /
• pp.21-28
• /
• 2011

Site conditions affect the magnitude of loss due to geologic hazards including, but not limited to, earthquakes, landslides and liquefaction. Reliable geologic loss estimation system requires site information which can be achieved by GIS-based method using geologic or topographic maps. Slope data derived from DEM can be an effective indicator for classifying the site conditions. We studied and discussed the effect of different DEM resolutions in the site classification. We limited the study area to the south-eastern Korea and used two different resolutions of DEMs to observe discrepancies in the site classification results. Largest discrepancy is observed in the areal coverage of site class C(very dense soil and soft rock) and E(soft soil). Comparison of results shows that more areas are classified as site class B(general rock) or E(soft soil) when we use higher resolution DEM. The comparison also shows that more areas are classified as site class C or D(stiff soil) using lower resolution DEM. The comparison of results using resampled DEMs with different resolutions shows that the areal coverage of site class B and E decreases with decreasing resolutions. On the contrary, areal coverage of site class C and D increase with decreasing resolutions. Loss estimation system can take advantage of higher-resolution DEMs in the area of rugged or populated to obtain precise local site information.