• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2003년도 ICCAS
• /
• pp.1771-1776
• /
• 2003

In mobile robot navigation, one of the key problems is the pose estimation of the mobile robot. Although the odometry can be used to describe the motions of the mobile robots quite simple and accurately, the validities of the models are limited by a number of error sources contaminating the encoder outputs so that applying the conventional extended Kalman filter to these nominal model does not yield the satisfactory performance. As a remedy for this problem, we consider the uncertain nonlinear kinematic model of the mobile robot that contains the norm bounded uncertainties and also propose a new robust extended Kalman filter based on the Krein space approach. The proposed robust filter has the same recursive structure as the conventional extended Kalman filter and can hence be readily designed to effectively account for the uncertainties. The computer simulations will be given to verify the robustness against the parameter variation as well as the reliable performance of the proposed robust filter.

• 한국해양공학회지
• /
• 제13권4호통권35호
• /
• pp.182-189
• /
• 1999

The robust design technology which can determine design variables getting best performance function with insensitivity to the environment noise, is an important method for improving the performance of products at low cost. Applying the robust design technology in ship design, Koh et al[10] introduced the planing hull design. This paper reports the application this technology to a 150K bulk carrier which has many design variables and shows that the robust design technology is superior to optimization technique in practical use.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 춘계학술대회 논문집
• /
• pp.207-210
• /
• 2002

This paper is concerned with the experiments on the active vibration control of a plate with piezoceramic sensors and actuators. The natural frequencies of the composite plate featured by a piezo-film sensor and piezo-ceramic actuator are calculated by using the modal analysis method. Modal coordinates are introduced to obtain the state equations of the structural system. Six natural frequencies were considered in the modelling, because robust control theory which has inherent robustness to structured uncertainty is adopted to suppress the transients vibrations of a glass fiber reinforced(GFR) composite beam. A robust controller satisfying the nominal performance and robust performance is designed using robust theory based on the structured singular value. Simulations were carried out with the designed controller and effectiveness of the robust control strategy was verified by results.

• 대한기계학회논문집A
• /
• 제25권9호
• /
• pp.1483-1492
• /
• 2001

A robust optimization procedure is applied to determine the design of the laminated composite plates with buckling constraints. In order to investigate the variation effect to the whole performance of a structure, both design variables and system parameters are assumed as random variables about their nominal values. The robust optimization method has advantages that the mean value and the variation of the performance function are controlled simultaneously and the second order sensitivity information is not required. Considering the information of uncertainty, robust optima for the buckling load of the laminated composite plates with cut-out is obtained. The robustness of the structures is compared to that of the deterministic optimization using scaling factors.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회A
• /
• pp.927-932
• /
• 2007

This paper proposes a robust back-stepping control with polynomial-type PD input for flexible joint robot manipulators to overcome parameter uncertainty. In the first step, a fictitious control is designed with polynomial-type PD input for the rigid link dynamic by the H-infinity control method. In second and third steps, the other fictitious control and real control are designed using saturation control and polynomial-type PD input based on the Lyapunov's second method. In each step, the designed robust inputs satisfy the L2-gain, which is equal to or less than gamma in the closed loop system. In contrast with the previous researches, the proposed method proves performance relations with PD gain from the robust gain. The performance robustness of the proposed control is verified through a 2-DOF robot manipulator with joint flexibility.

• 대한산업공학회지
• /
• 제39권5호
• /
• pp.325-341
• /
• 2013

During the past several decades, the Taguchi robust design method has been widely used in various fields successfully. On the other hand, some researchers and practitioners have criticized the method with respect to the way of utilizing orthogonal arrays, the signal-to-noise ratio as a performance measure, data analysis methods, etc., and proposed alternative approaches to robust design. This paper introduces the Taguchi method first, evaluates the validity of the criticisms, and discusses advantages and disadvantages of each alternative. Finally, research issues to be addressed for effective robust design are presented.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2001년도 춘계학술대회 논문집
• /
• pp.284-287
• /
• 2001

This paper presents the robust control simulation of a composite beam using self-sensing actuators(SSA). The self-sensing actuator is a new concept for intelligent material, where a single piezoelectric element simultaneously functions as both a sensor and an actuator. In a practical implementation of the self-sensing actuator an electrical bridge circuit is used to measure strain. The circuit could provide significant information about strain in the element if it were well-balanced. Our aim is design a robust controller which guarantees that the performance of a self-sensing actuator is robust against perturbation of the bridge balance and to confirm the advantages of this technique. Simulation results show that the self-sensing actuator driven by the designed controller exhibits excellent performance in suppressing the vibration of a composite beam.

• 대한기계학회논문집A
• /
• 제21권5호
• /
• pp.859-869
• /
• 1997

In this paper, the robust design and tolerancing of the stabilized mirror is performed to increase its stabilization performance under vehicle vibration. Based on the sensitivity analysis, the seven important control factors are first identified, and then the optimal as well as robust values in the sense of Taguchi method are obtained. Finally, the tolerances associated with each design variables are determined based on a successive sensitivity analysis of the simulated system response so that the deviation in the response from the target value meets the specification requirements. The proposed tolerancing method features that it is a robust but conservative design method and that the computational effort is much less than the Monte Carlo simulation method.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 춘계학술대회논문집A
• /
• pp.440-445
• /
• 2000

Robust tracking controller of optical disk drive(ODD) is designed using quantitative feedback theory(QFT). Nominal plant model is identified from real system through modal test. Uncertainties and control performance of tracking servo are specified, and robust controller satisfying these specifications is designed in the QFT framework. To verify the performances of designed controller, experiment are performed in a digital signal processor(DSP) environment, and experimental results are compared with simulations.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2000년도 제15차 학술회의논문집
• /
• pp.188-188
• /
• 2000

The most important problem in target tracking can be said to be modeling the tracking system correctly. Although the simple linear dynamic equation for this model has used until now, the satisfactory performance could not be obtained owing to uncertainties of the real systems in the case of designing the filters baged on the dynamic equations. In this paper, we propose the extended robust Kalman filter (ERKF) which can be applied to the real target tracking system with the parameter uncertainties. A nonlinear dynamic equation with parameter uncertainties is used to express the uncertain system model mathematically, and a measurement equation is represented by a nonlinear equation to show data from the radar in a Cartesian coordinate frame. To solve the robust nonlinear filtering problem, we derive the extended robust Kalman filter equation using the Krein space approach and sum quadratic constraint. We show the proposed filter has better performance than the existing extended Kalman filter (EKF) via 3-dimensional target tracking example.