• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2001.10a
• /
• pp.233-238
• /
• 2001

In the design and operation of robot arms with flexible links, the equations of motion are required to exactly model the interaction between rigid motion and elastic motion and to be formulated efficiently. Thus, the flexible link is represented on the basis of the D-H rigid link represented to measure the elastic deformation. The equations of motion of robot arms, which are configured by the generalized coordinates of elastic and rigid degrees of freedom, are formulated by using F.E.M to model complex shaped links systematically and by eleminating elastic mode of higher order that does not largely affect option to reduce the number of elastic degree of freedom. Finally presented is the result of simulation to flexible robotic arm whose joints are controlled by direct or PD control.

• International Journal of Control, Automation, and Systems
• /
• v.4 no.1
• /
• pp.42-52
• /
• 2006

In order to utilize hydrodynamic drag force on articulated robots moving in an underwater environment, an optimum motion planning procedure is proposed. The drag force acting on cylindrical underwater arms is modeled and a directional drag measure is defined as a quantitative measure of reaction force in a specific direction in a workspace. A repetitive trajectory planning method is formulated from the general point-to-point trajectory planning method. In order to globally optimize the parameters of repetitive trajectories under inequality constraints, a 2-level optimization scheme is proposed, which adopts the genetic algorithm (GA) as the 1st level optimization and sequential quadratic programming (SQP) as the 2nd level optimization. To verify the validity of the proposed method, optimization examples of periodic motion planning with the simple two-link planner robot are also presented in this paper.

• 제어로봇시스템학회:학술대회논문집
• /
• 1989.10a
• /
• pp.627-634
• /
• 1989

A collision-free trajectory planning algorithm using the iterative learning concept is proposed for dual robot arms in a 3-D workspace to accurately follow their specified paths with constant velocities. Specifically, a collision-free trajectory minimizing the trajectory error is obtained first by employing the linear programming technique. Then the total operating time is iteratively adjusted based on the maximum trajectory error of the previous iteration so that the collision-free trajectory has no deviation from the specified path and also the operating time is near-minimal.

• 제어로봇시스템학회:학술대회논문집
• /
• 1997.10a
• /
• pp.1293-1296
• /
• 1997

We investigate a design methodology for master arm which is employed in remote-site control. Though counter-balancing has been employed for the purpose of lessening the actuator loads, it results in the increase of dynamic load at the task position. Therefore, there exist a trade-off between counter-balacing and dynamic performance. The concept of a composite index is introduced to simulataneously consider those two effects in the design of master arms. Several alternative designs of master arms are suggested.

• 제어로봇시스템학회:학술대회논문집
• /
• 2003.10a
• /
• pp.180-185
• /
• 2003

In order to enhance dexterity in execution of robot tasks, a redundant number of degrees-of-freedom (DOF) is adopted for design of robotic mechanisms like robot arms and multi-fingered robot hands. Associated with such redundancy in the number of DOFs relative to the number of physical variables necessary and sufficient for description of a given task, an extra performance index is introduced for controlling such a redundant robot in order to avoid arising of an ill-posed problem of inverse kinematics from the task space to the joint space. This paper shows that such an ill-posedness of DOF redundancy can be resolved in a natural way by using a novel concept named “stability on a manifold”. To show this, two illustrative robot tasks 1) robotic handwriting and 2) control of an object posture via rolling contact by a multi-DOF finger are analyzed in details.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.56 no.4
• /
• pp.161-167
• /
• 2007

This paper introduces a dynamic walking control of biped walking robot using intelligent sensor interface and shows an intelligent control method for biped walking robot. For the dynamic walking control of biped walking robot, serious motion controllers are used. They are main controller(using INTEL80C296SA MPU), sub controller(using TMS320LF2406 DSP), sensor controller(using Atmega128 MPU) etc. The used sensors are gyro sensor, tilt sensor, infrared sensor, FSR sensor etc. For the feasibility of a dynamic walking control of biped walking robot, we use the biped walking robot which has twenty-five degrees of freedom(D.O.F.) in total. Our biped robot is composed of two legs of six D.O.F. each, two arms of five D.O.F. each, a waist of two D.O.F., a head of one D.O.F.

• International Journal of Control, Automation, and Systems
• /
• v.5 no.6
• /
• pp.681-690
• /
• 2007

This article presents the kinematic analysis and implementation of an interface and control of two robots-an exoskeleton master robot and a human-like slave robot with two arms. Two robots are designed and built to be used for motion-following tasks. The operator wears the exoskeleton master robot to generate motions, and the slave robot is required to follow after the motion of the master robot. To synchronize the motions of two robots, kinematic analysis is performed to correct the kinematic mismatch between two robots. Hardware implementation of interface and control is done to test motion-following tasks. Experiments are performed to confirm the feasibility of the motion-following tasks by two robots.

• Journal of Mechanical Science and Technology
• /
• v.18 no.11
• /
• pp.1949-1960
• /
• 2004

This paper presents a robot system developed for medical purpose. A 6-degree-of-freedom robot was introduced for physical exercise and rehabilitation. This system was proposed for stroke patients or patients who cannot use one of their arms or legs. The robot system exercises the hemiplegic part based on the motion of normal part of a patient. Kinematic studies on the human body and robot were applied to develop the robotic rehabilitation exercise system. A clamp which acts as an end effector of the robot to hold a patient was designed and applied to the robot to guarantee the safety of patients. The proposed robotic rehabilitation system was verified by simulations and experiments on arm (elbow and shoulder) motion. Patients are expected to be able to exercise various motions by themselves with the proposed robotic rehabilitation system.

• Journal of Institute of Control, Robotics and Systems
• /
• v.10 no.10
• /
• pp.930-939
• /
• 2004

In this paper, both dynamic constraints and kinematic constraints are considered for the analysis of manipulability of robotic systems comprised of multiple cooperating arms. Given bounds on the torques of each Joint actuator for every robot, the purpose of this study is to drive the bounds of task-space acceleration of object carried by the system. Bounds on each joint torque, described as a polytope, is transformed to the task-space acceleration through matrices related with robot dynamics, robot kinematics, object dynamics, grasp conditions, and contact conditions. A series of mathematical manipulations including the procedure calculating minimum infinite-norm solution of linear equation is applied to get the reachable acceleration bounds from given actuator dynamic constrains. Several examples including two robot systems as well as three robot system are shown with the assumptions of complete-constraint contact model(or' very soft contact') and insufficient or proper degree of freedom robot.

• Journal of the Korean Society for Precision Engineering
• /
• v.15 no.8
• /
• pp.165-173
• /
• 1998

In this paper, a motion control algorithm is developed by using fuzzy control technique, which makes a robot arm avoid unexpected obstacles when the robot is moving from the start to a goal posture. During the motion, if there exist no obstacles the robot arm moves along the pre-defined path. But if some obstacles are recognized and close to the robot arm, a fuzzy controller is activated to adjust the path of the robot arm. To show the feasibility of the developed algorithm, numerical simulations and experiments are carried out. In the experiments, redundant planar robot arms are considered for the collision avoidance test, and it was proved that the developed algorithm gives good collision avoiding performance.