• 제어로봇시스템학회논문지
• /
• 제16권11호
• /
• pp.1060-1067
• /
• 2010

In this paper, we present a new type of spherical robot having two arms. This robot, called KisBot, mechanically consists of three parts, a wheel-shaped body and two rotating semi-spheres. In side of each semi-sphere, there exists an arm which is designed based on slider-crank mechanism for space efficiency. KisBot has hybrid types of driving mode: rolling and wheeling. In the rolling mode, the robot folds its arms through inside of itself and uses them as pendulum, then the robot works like a pendulum-driven robot. In the wheeling mode, two arms are extended from inside of the robot and are contacted to the ground, then the robot works like a one-wheel car. The Robot arms can be used as a brake during rolling mode and add friction to the robot for climbing a slope during wheeling mode. We developed a remote controlled type robot for experiment. It contains two DC motors which are located in the center of each semi-sphere for main propulsion, two RC motors for each arm operation, speed controllers for each semi-sphere, batteries for main power source, and other mechanical components. Experiments for the rolling and wheeling mode verify the hybrid driving ability and efficiency of the our proposed spherical robot.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1992년도 하계학술대회 논문집 A
• /
• pp.422-424
• /
• 1992

In this paper, we are designed a hierachical system controller and builed a robot system for high precision assembly consisting in multi-arms and multi-sensor. For the control of a multi-arms robot system, the robot system are consisted of cell controller, station controller and device. The Operating System of a cell controller is VxWorks for real-time multi-processing. Using by C-language, we are proposed a multi-arms robot control language based a RCCL, and this control language is partially implemented and tested in multi-robot control system.

• 전기전자학회논문지
• /
• 제17권1호
• /
• pp.44-50
• /
• 2013

본 논문에서는 로봇의 팔을 기본 센서로 사용하여 별도의 센서 없이 사람을 따라다니는 햅틱 기반 로봇을 제안한다. 로봇 팔의 관절 각각에는 움직임을 생성하기 위한 모터가 있으며, 로봇 팔에 힘을 가하여 움직이면 각 관절의 각도가 변하면서 모터에서 그 각도를 출력 신호로 내보낼 수 있다. 따라서 사람이 로봇의 팔을 잡고 당기거나 밀면 로봇에서는 그 움직임을 각도로 읽어들이는 촉감 인터페이스로 활용할 수 있다. 구현된 로봇은 사람이 팔로 로봇 팔을 잡아끄는 움직임을 측정하여 움직이며 사람이 손을 잡고 이끎으로서 사람을 따라다닐 수 있다.

• 제어로봇시스템학회논문지
• /
• 제14권10호
• /
• pp.998-1004
• /
• 2008

In this paper, a visual servoing control technique of humanoid robot arms is implemented for tracking a moving object. An embedded time-delayed controller is designed on an FPGA(Programmable field gate array) chip and implemented to control humanoid robot arms. The position of the moving object is detected by a stereo vision camera and converted to joint commands through the inverse kinematics. Then the robot arm performs visual servoing control to track a moving object in real time fashion. Experimental studies are conducted and results demonstrate the feasibility of the visual feedback control method for a moving object tracking task by the humanoid robot arms called the ROBOKER.

• 한국지능시스템학회:학술대회논문집
• /
• 한국지능시스템학회 2008년도 춘계학술대회 학술발표회 논문집
• /
• pp.71-74
• /
• 2008

The main object of this paper is concentrated on distance control of two robot arms of a humanoid using Fuzzy Logic Controller (FLC) for handling a common object. Serial Link Robot arms are widely used in most significantly in Humanoids serving for older people and also in various industrial applications. A method is proposed here that separates the interconnections between two robot arms so that the resulting model of two arms is decomposed into fuzzy logic based controller. The distance between two end effectors is always kept equal to that of the diameter of an object to be handled, so that the object would not fall down. Mathematical model of this system was obtained to simulate the behavior of serial robotic arms in close loop control before using fuzzy logic controller. Lagrangian equation of motion has been used to obtain the appropriate mathematical model of Robotic arms. The results are shown to provide some improvement over those obtained by more conventional means.

• 전자공학회논문지
• /
• 제50권3호
• /
• pp.203-211
• /
• 2013

본 논문에서는 바닥작업용 서비스 로봇을 위한 두 팔 매니퓰레이터의 개발 및 제어에 관한 연구를 기술하였다. 6자유도의 매니퓰레이터를 설계하였으며, 그 중 5자유도 매니퓰레이터를 제작하였다. 제작된 매니퓰레이터의 순기구학과 역기구학을 해석하고 시뮬레이션을 수행하여 기구학을 검증하였다. 실제로 역기구학을 바탕으로 로봇 팔을 제작하여 제어하였다. 양팔의 동작 성능을 확인하기 위해 오른쪽 팔과 왼쪽 팔을 각각 따로 제어하여 서로 다른 경로를 추종하는 실험을 수행하였다. 실험결과를 통해 기구학 분석을 검증하였으며, 시스템의 동작 여부를 확인할 수 있었다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2005년도 ICCAS
• /
• pp.2154-2159
• /
• 2005

This paper presents the kinematic analysis of two robots, an exoskeleton type master robot and a human like slave robot with two arms. Two robots are designed and built to be equivalent as motion following robots. The operator wears the exoskeleton robot to generate motions, then the slave robot is required to follow after the motion of the master robot. However, different kinematic configuration yields position mismatches of the end-effectors. To synchronize motions of two robots, kinematic analysis of mapping is analyzed. The forward and inverse kinematics have been simulated and the corresponding experiments are also conducted to confirm the proposed mapping analysis.

• 제어로봇시스템학회논문지
• /
• 제16권9호
• /
• pp.891-897
• /
• 2010

This paper proposes a cooperative control algorithm for a dual-arms robot which is carrying an object to the desired location. When the dual-arms robot is carrying an object from the start to the goal point, the optimal path in terms of safety, energy, and time needs to be selected among the numerous possible paths. In order to quantify the carrying efficiency of dual-arms, DAMM (Dual Arm Manipulability Measure) has been defined and applied for the decision of the optimal path. The DAMM is defined as the intersection of the manipulability ellipsoids of the dual-arms, while the manipulability measure indicates a relationship between the joint velocity and the Cartesian velocity for each arm. The cost function for achieving the optimal path is defined as the summation of the distance to the goal and inverse of this DAMM, which aims to generate the efficient motion to the goal. It is confirmed that the optimal path planning keeps higher manipulability through the short distance path by using computer simulation. To show the effectiveness of this cooperative control algorithm experimentally, a 5-DOF dual-arm robot with distributed controllers for synchronization control has been developed and used for the experiments.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1987년도 한국자동제어학술회의논문집(한일합동학술편); 한국과학기술대학, 충남; 16-17 Oct. 1987
• /
• pp.915-920
• /
• 1987

When a task requires two robot arms to move in a cooperative manner sharing a common workspace, potential collision exists between the two robot arm . In this paper, a novel approach for collision-free trajectory planning along paths of two SCARA-type robot arms is presented. Specifically, in order to describe potential collision between the links of two moving robot arms along the designated paths, an explicit form of "Virtual Obstacle" is adopted, according to which links of one robot arm are made to grow while the other robot arm is forced to shrink as a point on the path. Then, a notion of "Coordination Chart" is introduced to visualize the collision-free relationship of two trajectories.of two trajectories.

• 제어로봇시스템학회논문지
• /
• 제20권9호
• /
• pp.964-970
• /
• 2014

In this study we have developed an anthropomorphic robot hand and arm by using tendon-tubes which can be used for people's everyday life as a robot's dynamic power transmission device. Most previous robot hands or arms had critical problem on dynamic optimization due to heavy weight of power transmission parts which placed on robot's finger area or arm area. In order to resolve this problem we designed light-weighted robot hand and arm by using tendon-tubes which were consisted of many articulations and links just like human's hand and arm. The most prominent property of this robot hand and arm is reduction of the weight of robot's power transmission part. Reduction of weight of robot's power transmission parts will allow us to develop energy saving and past moving robot hands and arms which can be used for artificial arms. As a first step for real development in this study we showed structural design and demonstration of simulation of possibility of a robot hand and arm by tendon-tube. In the future research we are planning to verify practicality of the robot hand and arm by applying sensing and controlling method to a specimen.