• Journal of the Korean Wood Science and Technology
• /
• 제22권1호
• /
• pp.80-84
• /
• 1994

The orientation of bezene ring in latex film was investigated with raman spectroscopy. The benzene ring of anionic latex ran parallel with the film surface of latex, whereas that of amphoteric latex did not. Consequently, it showed the possibility of interactions or interrelations between the orientation of benzene ring and ink, contact angle, printability and so on.

• Journal of the Korean Wood Science and Technology
• /
• 제40권6호
• /
• pp.363-369
• /
• 2012

연륜경사에 따른 전단강도 실험이 국내에서 생산되는 목재에 대해 실시됐다. 연륜경사는 전단강도에 영향했고, 경사진 연륜에서 최대였다. 전단강도는 나사못 유지력을 예측하기 위한 식에 포함됐다. 나사못 유지력의 예측식은 No. 8 나사못의 실험결과와 비교하여 25 mm와 30 mm 길이에서 8% 이내로 작게 예측되었으나 18 mm와 38 mm에서는 큰 값을 보였다. 전단강도를 사용한 나사못 유지력의 예측값과 실험값 사이에는 연륜경사에 따라 큰 차이를 보이지 않았다.

• Nuclear Engineering and Technology
• /
• 제31권4호
• /
• pp.423-431
• /
• 1999

A radiotracer technique has been developed to monitor the rotational movement of two piston rings in one cylinder during engine operation. The rings were labeled with two different kinds of radioisotopes, i.e. $^{60}$ Co and $^{192}$ Ir, for identification of the top ring from the second ring. The radiotracers were implanted in a small hole bored on the inner side of each piston ring. The rings were installed in a single cylinder hydrogen engine and three Nal scintillation detectors were mounted around the engine block to measure the gamma radiation. The angle of ring-gap orientation was determined from the radiation counts measured with the three detectors during engine operation. Two windows (upper window for $^{60}$ Co and lower window for $^{192}$ Ir) were set on each ratemeter to count radiation from the two isotopes separately. Procedure to convert the radiation counts to the position of the ring gap was established. With the software programmed with MS-Visualbasic, radiation counts were compared with the reference responses that were measured at angular intervals of 10$^{\circ}$for each piston ring in advance of the experiment. The result was used for the evaluation of the relationship between the orientation of ring-gaps and oil consumption. It was found that an increase in the oil consumption rate of a specific operation condition was closely related to the relative phase angle of the two piston rings.

• 한국구조물진단유지관리공학회 논문집
• /
• 제13권1호통권53호
• /
• pp.169-178
• /
• 2009

링 형태의 강섬유 (Ring-type steel fibers: 이하 RSF)는 원형의 폐곡선 형태를 갖는 강섬유로서 선형 강섬유와는 다른 저항 메카니즘을 가지며 폐곡선으로 둘러싸인 평면에 대하여 동일한 방향성을 가지는 특성을 갖는다. 이 연구에서는 섬유의 단위투입량 $15kg/m^3$과 $30kg/m^3$의 RSF 및 선형 강섬유를 혼입한 콘크리트 패널의 휨인성을 실험, 비교하였다. 파단면에서의 RSF의 저항 형태를 규명하였으며 RSF를 혼입한 패널이 선형 강섬유를 혼입한 패널에 비하여 우수한 인성값을 나타냄이 관찰되었다. RSF에 대한 방향성을 제시하였으며 RSF를 혼입한 실험체의 경우, 보 실험체에 비하여 두께가 상대적으로 얇은 패널 실험체에서 RSF가 더 효율적으로 인성 증가에 기여함이 관찰되었다.

• 방송공학회논문지
• /
• 제21권3호
• /
• pp.404-411
• /
• 2016

본 논문에서는 우리나라 FM(Frequency Modulation) 방송국에서 송신용 안테나로 사용하고 있는 CP(circularly polarized)-dipole 안테나와 CP(circularly polarized)-ring 안테나에 대해 실제 전계 강도 측정을 통한 안테나의 전파 방사 패턴을 조사하고, 현장 적용에 대해 비교 고찰하였다. 비교 결과, 송·중계소가 방송국의 방송 서비스 지역의 한 가운데에 위치하는 경우에는 CP-dipole 안테나(4방향)가 유용하며, 후방에 있는 철탑의 반사 효과로 인해 지향 특성을 갖는 CP-ring 안테나는 지향 방향의 조정을 통하여 타 지역으로의 전파 월경 방지는 물론 주요 서비스 방향으로 5∼9dB 높은 전파를 방사할 수 있었다. 특히, 송·중계소가 서비스 구역의 한 쪽 방향에 위치하여 3방향으로 전파를 방사하는 경우가 많은 우리나라에서는 CP-ring 안테나를 사용하여 안테나의 지향 방향을 인구 및 도로 밀집 지역으로 집중하여 방송 수신 환경을 개선시킬 수 있다.

• International Journal of Precision Engineering and Manufacturing
• /
• 제4권5호
• /
• pp.15-21
• /
• 2003

In order to improve the quality of a spindle unit it is important to increase its rotational accuracy. The rotational accuracy of a spindle unit can be defined as the stability or immobility of its spindle axis while rotating. Spindle rotation in the rolling bearings causes the disturbing influence, which leads to the oscillation of a rotation axis. The purpose of this study is to investigate the oscillation sources and find a way to decrease the runout without additional expenses. The main source of oscillation is the interaction between rolling bodies and ring races. The first oscillation source was the out-of-shape imperfection of inner bearing ring. The mutual compensation of oscillation by proper rings orientation was proposed, which sometimes allow to decrease the radial runout of spindle rotation axis by approximate 40％ down. Also the outer ring harmonics were explored as the second oscillation source. The analysis shows the dependency between the number of rolling bodies and the outer ring race harmonics. The conclusion on the orientation of bearing cages and the bearing rings was made, which makes possible to obtain the optimal variant of their mounting in the spindle unit when the rotational accuracy of the spindle is maximal, and the spindle runout considerably less.

• Bulletin of the Korean Chemical Society
• /
• 제30권8호
• /
• pp.1755-1759
• /
• 2009

Surface structure and molecular orientation of self-assembled monolayers (SAMs) formed by the spontaneous adsorption of tetrahydrothiophene (THT) and thiophene (TP) on Au(111) were investigated by means of scanning tunneling microscopy (STM) and carbon K-edge near edge X-ray absorption fine structure (NEXAFS) spectroscopy. STM imaging revealed that THT SAMs have a commensurate (3 ${\times}\;2\sqrt[]{3}$) structure containing structural defects in ordered domains, whereas TP SAMs are composed of randomly adsorbed domains and paired molecular row domains that can be described as an incommensurate packing structure. The NEXAFS spectroscopy study showed that the average tilt angle of the aliphatic THT ring and $\pi$-conjugated TP ring in the SAMs were calculated to be about $30^o\;and\;40^o$, respectively, from the surface normal. It was also observed that the $\pi$* transition peak in the NEXAFS spectrum of the TP SAMs is very weak, suggesting that a strong interaction between $\pi$-electrons and the Au surface arises during the self-assembly of TP molecules. In this study, we have clearly demonstrated that the surface structure and adsorption orientation of organic SAMs on Au(111) are strongly influenced by whether the cyclic ring is saturated or unsaturated.

• 대한금속재료학회지
• /
• 제48권8호
• /
• pp.717-723
• /
• 2010

The degradation behavior of fuel cladding is a very import concern in nuclear power generation, because the operation of nuclear plants can be limited by fuel cladding degradation. In order to evaluate the hydride effect on failure of zirconium fuel claddings, a ring tensile test for the circumferential direction was carried out at room temperature for claddings having different hydride characteristics such as density and orientation; microstructural evaluation was also performed for those claddings. The circumferential failure of the claddings was promoted by increasing the hydride concentration in the matrix; however, the failure of the claddings was affected by the hydride orientation rather than by the hydride concentration in the matrix. From fracture surface observation, the cladding failure during the ring tensile test was matched with the hydride orientation.

• Bulletin of the Korean Chemical Society
• /
• 제19권5호
• /
• pp.569-575
• /
• 1998

Investigation of the structure of the gangliosides has proven to be very important in the understanding of their biological roles. We have determined the tertiary structure of asialoganglioside GM1 $(GA_1)$ using NMR spectroscopy and distance geometry calculations. All of the structures are very similar except the glycosidic torsion angles in the ring IV and ring III linkages. There are two low-energy structures for GA1, G1 and G2. G1 differs from G2 only in the IV-III glycosidic linkages and the orientation of acetamido group in ring III. There is a stable intramolecular hydrogen bond between the third hydroxyl group in ring I and the ring oxygen atom in ring II. Also, there may be a weak hydrogen bond between the second hydroxyl group in ring IV and the acetamido group in ring III. Small coupling constants of $^3J_{IH3,IOH3}\; and\; ^3J_{IVH2,IVOH2}$ support this result. Overall structural features of $(GA_1)$ are very similar to those of $(GM_1)$. It implicates that specificities of the sugar moieties in GM1 are caused not by their tertiary foldings, but mainly by the electrostatic interactions between the polar sialic acid and its receptors. Since it is evident that $(GA_1)$ is more hydrophobic than $(GA_1)$, a receptor with a hydrophobic binding site can recognize the $(GA_1)$ better than $(GA_1)$. Studies on the conformational properties of $(GA_1)$ may lead to a better understanding of the molecular basis of its functions.

• 폴리머
• /
• 제25권5호
• /
• pp.699-706
• /
• 2001

연신온도, 연신속도, 연신비 등 연신 조건에 따른 poly(ethylene 2,6-naphthalate) (PEN)의 배향상태 변화를 살펴보았다. 연신온도가 낮을수록 연신속도가 빠를수록 연신비에 따라 큰 복굴절 값을 보이며 FT-IR ATR dichroism 방법으로 구한 배향 특성도 복굴절의 실험결과를 뒷받침하였다. PEN을 $120^{\circ}C$에서 연신하면 무정형사슬 배향함수 ($f_a$)가 연신속도가 빠를수록 높은 값을 갖지만 $141^{\circ}C$에서 연신하면 반대로 연신속도가 빠를수록 낮은 값을 갖게 된다. 이러한 경향은 결정화 속도와 사슬 이완속도와의 관계로부터 설명이 가능하다. X-선 회절 실험 결과로부터 PEN의 naphthalene ring 구조가 필름표면에 평행하게 배열됨을 확인할 수 있었다.