• 한국철도학회논문집
• /
• 제18권4호
• /
• pp.289-300
• /
• 2015

철도 전동 소음은 철도에서 발생하는 대표적인 소음으로서 차륜과 레일의 음향 조도에 의해 가진 된 차륜 및 레일의 진동으로부터 발생한다. 철도 전동 소음 해석 시 레일 방사 소음은 자유 공간에 놓인 레일의 음향 방사 파워를 이용해 원거리에서 계산하므로, 일반적으로 소음원 모델에 지면 반사를 고려하지 않는다. 그러나 레일 주위의 근접 음장을 해석하고 저감 대책을 적용하기 위해서는 지면에 의한 음파의 반사를 고려해야 한다. 본 논문에서는 파수유한요소/경계요소법을 이용해 지면에 의해 발생하는 레일 소음의 변화와 그 특성을 살펴보았다. 해석은 먼저 레일이 강체 지면에 부착된 경우와 레일 패드 높이만큼 강체 지면에서 이격된 경우에 대해 방사효율을 구하고 그 결과를 비교하였다. 이를 통해 레일과 강체 지면의 이격 여부에 따라 레일 방사 소음에 크게 변화함을 확인하였다. 둘째로는 지면에 임피던스 경계조건을 부여하고 레일에서 방사되는 음향 파워 및 지향 특성의 변화를 살펴보았다.

• 한국해양학회지
• /
• 제29권3호
• /
• pp.296-303
• /
• 1994

회전하는 원통형 이층 유체에 하층 유체와 동일한 밀도의 유체를 경사진 하층 바 닥의 둘레를 통하여 주입시 하층 내부는 일정한 수직 운동을 하게 되며 이러한 수직운 동은 결국 하층 유체에 Sverdrup type의 운동인 남향의 서안 경계류와 북향의 내부 운 동을 발생시킨다. 이때 $\beta$-효과와 동시에 하층 유체가 상층 경계면과 만나게 하므로써 소위 극전선 효과를 갖고 있는 상층 유체의 운동 특성을 관찰하였다. 서안에서 의 순 압성, 동안에서 의 경압성 운동이 뚜렷하게 나타나고 특히 동안 경계류의 남향과 서안 경계류의 남향은 서안에서 의 이안 현상을 야기시킨다. 상층에 $\beta$-효과를 증가시 서안 경계류의 폭이 감소하는 이안 현상후 내부에 "eddy" 모양의 흐름이 존재한다. 한편 경압성 Rossby wave는 동안 부근에서 뚜렷하게 관측되나 서쪽으로 진행하면서 소멸되 는 현상이 관측되었다. 하층 유체에 국지적 지형 효과서 준 경우 상층수의 서안 경계 류 및 동안 경계류가 민감하게 반응하여 동안에서는 정상파 형태의 운동이 나타나고 서안에서는 이안 현상 없이 경계류의 폭이 증가함을 보인다. 이는 하층의 순압성 운동 이 지형 효과를 느끼는 반면, 그 영향은 상층에 직접전달되지 못하고 있음을 보여주고 있는 것이라 사료된다. 상층의 $\beta$-효과 증가시 internal radius보다 훨씬 큰 규모의 파형이 내부에 존재하는 특성을 보여 주고 있다. 보여 주고 있다.

• Structural Engineering and Mechanics
• /
• 제58권5호
• /
• pp.887-903
• /
• 2016

This study analyses the seismic response of a three-dimensional (3-D) rigid massless square foundation resting or embedded in a viscoelastic soil limited by rigid bedrock. The foundation is subjected to harmonic oblique seismic waves P, SV, SH and R. The key step is the characterization of the soil-foundation interaction by computing the impedance matrix and the input motion matrix. A 3-D frequency boundary element method (BEM) in conjunction with the thin layer method (TLM) is adapted for the seismic analysis of the foundation. The dynamic response of the rigid foundation is solved from the wave equations by taking into account the soil-foundation interaction. The solution is formulated using the frequency BEM with the Green's function obtained from the TLM. This approach has been applied to analyze the effect of soilstructure interaction on the seismic response of the foundation as a function of the kind of incident waves, the angles of incident waves, the wave's frequencies and the embedding of foundation. The parametric results show that the non-vertical incident waves, the embedment of foundation, and the wave's frequencies have important impact on the dynamic response of rigid foundations.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2003년도 춘계학술대회논문집
• /
• pp.439-442
• /
• 2003

This study presents a new computational model to analyze the grain deformation in a polycrystalline aggregate in a discrete manner and based directly in the underlying physical micro-mechanisms. As a result, specific characteristics have to be considered for the numerical analysis. The grains and grain boundary elements are introduced to model individual grains and grain boundary facets, respectively, to consider the size effects in the micro forming. The constitutive description of the grain elements accounts for the rigid-plastic and the grain boundary elements for elastic relationships. The capability of the proposed approach is demonstrated through application of grain element and grain boundary element in the micro forming.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 1999년도 봄 학술발표회 논문집
• /
• pp.19-26
• /
• 1999

This paper deals with the stress singularity induced at the interface corner between the viscoelastic thin film and the rigid substrate as the film absorbs moisture from the ambient environment. The rime-domain boundary element method is employed to investigate the behavior of interface stresses. The order of the free-edge singularity is obtained numerically for a given viscoelastic model. It is shown that the free-edge stress intensity factor is relaxed with time,'while the order of the singularity increases with time for the viscoelastic model considered.

• 천문학회지
• /
• 제21권2호
• /
• pp.105-116
• /
• 1988

We have investigated hydrodynamical behaviors of spicules by solving numerically the hydrodynamic equations subject to proper boundary conditions using the method of characteristics. We examined the behaviors of MHD slow mode waves propagating through rigid magnetic flux tubes which were excited by the pressure perturbations at the lower boundary. It is found that the spicules are identified as the manifestation of the movement of the transition region being pushed upward by collisions with the shock waves. One of the most important findings is the presence of the rebound shocks and their roles. We interpreted the rebound shocks in terms of the observed recurrent spicules.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2002년도 가을 학술발표회 논문집
• /
• pp.70-77
• /
• 2002

Since our physical world cannot be modeled as rigid body, deformable object models are important. For real-time simulation of elastic object, it must be guaranteed by its exact solution and low-latency computational cost. In this paper, we describe the boundary integral equation formulation of linear elastic body and related boundary element method(BEM). The deformation of elastic body can be effectively solved with 1ow run-time computational costs, using precomputed Green Function and fast low-rank updates based on Capacitance Matrix Algorithm.

• 대한기계학회논문집A
• /
• 제28권12호
• /
• pp.2019-2031
• /
• 2004

The least-squares formulation for rigid-plasticity based on J$_2$-flow rule and infinitesimal theory and its meshfree implementation using moving least-squares approximation are proposed. In the least-squares formulation the squared residuals of the constitutive and equilibrium equations are minimized. Those residuals are represented in a form of first-order differential system using the velocity and stress components as independent variables. For the enforcement of the boundary and frictional contact conditions, penalty scheme is employed. Also the reshaping of nodal supports is introduced to avoid the difficulties due to the severe local deformation near the contact interface. The proposed least-squares meshfree method does not require any structure of extrinsic cells during the whole process of analysis. Through some numerical examples of metal forming processes, the validity and effectiveness of the method are investigated.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2001년도 하계종합학술대회 논문집(4)
• /
• pp.85-88
• /
• 2001

Unlike rigid objects or This paper developes the algorithm for segmenting gaseous objects on an image plane. Unlike rigid objects or solid non-rigid objects, gaseous objects vary in density even within single-object regions and the edge intensity differs at different locations. So, an edge detector may detect only strong edges and detected edges may be an incomplete parts of an whole object's boundary. Due to this property of gaseous objects, it is not easy to distinguish the real edges of gaseous objects from the noisy-like edges such as leaves. Our algorithm uses two criteria of edge intensity and edge's line connectivity, then applies fuzzy set so as to obtain the proper threshold of the edge detector

• 대한기계학회논문집
• /
• 제19권9호
• /
• pp.2165-2172
• /
• 1995

Optimization of mesh discretization has been proposed to improve the accuracy of limit analysis solution of collapse load by using the Rigid Body Spring Model(R. B. S. M) under the plane strain condition. Moreover, the fracture behaviour of materials was investigated by employing the fracture mechanism of a spring connecting the triangular rigid body element. It has been clarified that the collapse load and the geometry of slip boundary for optimized mesh discretization were close to those of the slip line solution. Further, the wedge-shaped fracture of a cylinder under a lateral load and the central fracture of a strip in the drawing process were well simulated.