• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.41 no.7
• /
• pp.799-808
• /
• 2016

The IEEE 802.15.7r1 Task Group (TG7r1), known as the revision of the IEEE 802.15.7 Visible Light Communication standard targeting the commercial usage of visible light communication systems which mainly use either image sensors or cameras, is of interest in this paper. The vast challenge in Image Sensor Communications (ISC), as it has been addressed in the Technical Consideration Document (TCD) of the TG7r1, is the Image Sensor Compatibility to support the variety of different commercial cameras available on the market. The on-going ISC standard must adhere to compatible image sensors regulations. This paper brings an inside review of the TG7r1 and an inside look of related works on Image Sensor Communications. The paper analyzes the compatibility features by introducing a revised model of receiver to explain how those features are necessary. One of the most challenging but interesting features is the capability in being compatible to camera frame rates. The variation of camera frame rate is modeled from verified experimental results. Noticeably, three singular approaches to support frame rates compatibility, including temporal approach, spatial approach, and frequency-domain approach, are proposed on the paper along with concise definitions. Those schemes have been presented as valuable proposals on the call-for-proposal meeting series of the TG7r1 recently.

• Journal of the Korean Society for Railway
• /
• v.13 no.1
• /
• pp.9-15
• /
• 2010

When designing the size of a heavy maintenance shop for rolling stock, it is required to arrange buildings and facilities in the minimum site so as to improve the maintenance efficiency. However, the fluctuation rate (hereinafter "allowance rate") on which factors such as service and maintenance fluctuation should be applied when estimating the size of the maintenance shop has been used without verification. The objective of the study is to calculate a reasonable allowance rate and to review its appropriateness through the analysis of the facilities layout and process simulation to absorb the above elements into the staying time in the heavy maintenance shop. Since the working time, in this study, is assumed to be average working time, 10~20% was given to the standard deviation of working time in consideration of difference between workers, and possible allowance rate was drawn by analysis of the simulation results. In the future, it is required to optimize the size of the shop by applying appropriate allowance rate through scientific review of such factors as O&M plan, R/S reserve rate, capability of the shop, outsourcing rate, standard work amount, and so on.

• Korean Journal of Health Education and Promotion
• /
• v.31 no.4
• /
• pp.1-10
• /
• 2014

Objectives: The effectiveness of Blood ${\beta}$-ketone testing by using self-monitoring strip on diabetic patients. Methods: Clinical effectiveness of blood ${\beta}$-ketone testing was assessed through correlation with reference test that measured blood ${\beta}$-ketone value through gas chromatography or enzyme method, diagnostic accuracy, time taken for the test and time taken for confirmative diagnosis of diabetic ketosis by selecting literatures on researches that conducted this test on ketosis(suspected) patients or diabetic ketosis(suspected) patients. Each of the stages from literature search to application of selection standards and extraction of data were carried out independently by the Subcommittee along with 2 researchers. Results: 7 reports were selected. ${\beta}$-ketone testing displayed high level of correlation in the range of r=0.92~0.99 with test using enzyme method as the reference standard. Regarding the diagnostic accuracy, sensitivity of 0.82, specificity of 0.74. The time taken for the test was 30seconds for the index test, which is shorter than reference standard test. Conclusion: Blood ${\beta}$-ketone testing was assessed to be a safe and effective test to monitor ketosis and assess the level of risk of ketosis by measuring the blood ${\beta}$-ketone on ketosis patients and diabetic ketosis patients since it has high level of correlation with reference test and short period of testing.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.16 no.1
• /
• pp.131-146
• /
• 2017

Unlike in the past based on autonomous vehicle development sensor, In recent years, research has been conducted using external data such as LDM to compensate for the disadvantages of sensors. So, this study suggested the construction method of static map that provides road information for autonomous driving of vehicles as LDM - based information. In other to suggest, after review LDM's ISO 14296 and data specification and map of precise roda map of NGII, we had confirmed the correspondence wiht the international standard of NGII specification. As a result of the review, it is relatively good in terms of provided data and information, but the road structure expression is partially incompatible with the international standard. AS it is necessary to supplement about currently specification and method and suggest, this study had suggested ways to supplement the insuficient and to express the road structure.

• Journal of Environmental Health Sciences
• /
• v.38 no.4
• /
• pp.300-310
• /
• 2012

Objectives: Indoor air quality problems in public spaces have recently become a very important issue in South Korea, because many spend a long time every day indoors. In this study, an extensive literature review was performed on the subject of suspended bacteria and fungi in public facilities. The objective of this study was to evaluate the extent and types of suspended bacteria and fungi in indoor air in South Korea. This study will provide direction to the research in the field of indoor air. Methods: Article reviews was conducted using a search engine and the following keywords; 'bacteria', 'total suspended bacteria', 'fungi' and 'indoor air' from published articles since 2000. Results: Most of the places of measurement were schools, kindergartens, childcare centers and general hospitals. The highest concentrations of total suspended bacteria and fungi were found in schools and kindergartens. Some public facilities exceeded the standard of 800 CFU/$m^3$. There were few studies on other suspended bacteria: Gram Negative Bacteria, Staphylococcus and Klebsiella pneumoniae. Conclusions: It appears that more studies with intensive controls are needed. It was found that schools and kindergartens were most susceptible to microbial indoor air pollution. These results may be able to suggest an indoor standard for suspended bacteria and fungi in South Korea.

• Asian Pacific Journal of Cancer Prevention
• /
• v.14 no.10
• /
• pp.6189-6193
• /
• 2013

In December 2011, the Cancer Research Centre of the Cancer Institute of Iran sponsored a 3-day workshop on "Cancer Registration Principle and Challenges in Iran", which convened cancer registry experts. The objectives of the workshop were: to introduce standard cancer registration, to review the policy and procedure of cancer registration in Iran, and to review the best practices in the cancer registries in Iran. Challenges to cancer registration were discussed and recommendations were developed. The workshop was evaluated by participants for better organization of subsequent workshops. The objective of publication of this report is that based on Cancer in 5 Continents, many low- or middle-income countries do not meet the criteria for a standard population-based cancer registry (PBCR); on the other hand cancer is the most important cause of mortality and the essential part of any cancer control program is the cancer registry. Therefore this report focuses on problems and challenges of PBCR and provides recommendations which might help other developing countries to decrease their PBCR defects.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.30 no.3
• /
• pp.270-279
• /
• 2020

Objective: The aim of this study was to propose revision of the occupational exposure limit(OEL) for 1-Bromopropane(1-BP) following a review of the appropriateness of the standard in light of increasing epidemiological data and handling risk. Materials and Methods: The results of toxicity and epidemiologic investigations for 1-BP and agencies' OELs were compared and reviewed through a literature review. In order to investigate the status of 1-BP handling in South Korea, data from work environment actual condition survey results and work environment measurement results were used. Results: The toxicity of 1-BP, such as central nervous system(CNS) damage, peripheral neuropathy, hematological adverse effects, and developmental and reproductive toxicity(male and female) has been reported. ACGIH recommends 0.1 ppm as a TLV-TWA value, but the OEL of South Korea stands at 25 ppm, which is 250 times higher than the TLV-TWA. Although 1-BP is a specially managed substance under the Industrial Safety and Health Law, the currently applied OEL cannot be said to be a safe level based on the results of epidemiological studies to date. In a work environment measurement in 2017, the total number of samples was 626, which were derived from 78 industries, and the average concentration was 1.173 ppm(standard deviation 2.88). Conclusions: To protect the health of workers handling 1-BP, estimated to be 780 in South Korea, it is necessary to strengthen the OEL(TWA) to a level of 0.3 ppm(lower than the 0.34 ppm with known toxic effects), which is believed to be safe as a result of epidemiological investigation. "Skin" notation should be recommended.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.21 no.2
• /
• pp.104-113
• /
• 2013

New USNCAP has been carried out by NHTSA including front and side crash from MY2011. In this paper, test results for USNCAP Side crash were reviewed by statistical analysis. This review focused on side crash test results to investigate the effect of changes from new USNCAP side crash test protocol among 30 passenger cars. These results were summarized as followings. Total number of 5 star vehicles on the front seat dummy (16 vehicles, 53.3%) was slightly smaller than the rear seat's (17 vehicles, 56.7%) in MDB test. For the ES-2re dummy, chest injury, ie maximum rib deflection contributed to 66% in the mean value of $P_{joint}$. Pelvis injury was highly dependent upon performance up to 87% in the SID-IIs dummy cited on the rear seat in average $P_{joint}$. For Pole test, pelvis injury made contribution to the average performance to 83%. For standard deviation, it showed the largest value in the same body region as the mean value for each dummy. Overall front seat performance showed 14 vehicles, 44.6% with 5 star vehicles less than each MDB or Pole test result. This result showed that performances in MDB test were different pattern to Pole test on driver position. Number of 5star vehicles for overall side NCAP performance are 18 passenger cars (60%). Curtain airbag and driver thorax airbag were equipped in all test vehicles. One vehicle is equipped with thorax airbag in the rear seat. Results from two side tests considered as reliability problem, ie the cause for large standard deviation in side crash test. Consequently, the countermeasure for new USNCAP side crash test is essential to design the effective side structures for side collision and to control well dummy kinematics with curtain and thorax airbag in order to reduce chest and pelvis injuries.

• Nuclear Engineering and Technology
• /
• v.38 no.7
• /
• pp.639-656
• /
• 2006

In order to apply the leak before break (LBB) concept to nuclear piping systems, the dynamic strain aging effect of low carbon steel materials has to be taken into account, in compliance with the requirements of the Korean Standard Review Guide (KSRG) 3.6.3-1. For this goal, J-R tests are needed for a range of various temperatures and loading rates, including dynamic loading conditions. In the dynamic loading J-R test, the unloading compliance method can not be applied to measure the crack growth and direct current potential drop (DCPD) method; this method also has a problem defining the crack initiation point. The normalization method is known as a very useful method to determine the J-R curve under dynamic loading because it does not need additional equipment or complicated loading sequences such as electric current or unloading. This method was accepted by the American Society for Testing and Materials (ASTM) as a standard test method E1820 A15 in 2001. However, it has not yet been clearly verified yet if the normalization method is sufficiently reliable to be applied to LBB. In this study, the basic background of the J-integral, LBB and dynamic loading J-R test are explained, and the current status for dynamic loading J-R test methods are reviewed from the view point of LBB for nuclear piping. In particular, the theoretical and historical background of the normalization method which has received attention recently, is summarized. Recent studies for this method are introduced and future works are suggested that may improve the reliability of LBB for nuclear piping.

• Journal of Climate Change Research
• /
• v.5 no.4
• /
• pp.339-348
• /
• 2014

Agro-ecosystem plays an important role in the mitigation of atmospheric $CO_2$ concentration through photosynthesis and soil carbon fixation. The perennial crops have capacity of carbon accumulation because they have lived for years in the same position. Carbon dioxide fixation occurs in the fruit orchard by photosynthesis and soil carbon sequestration. The objectives of this review are to introduce the fruit orchard as a carbon dioxide sink and to summarize the methods that measure $CO_2$ flux in the orchard. There are three difference methods (chamber, biomass, and eddy covariance method) to measure $CO_2$ exchanges on sites. However, there is no standard method suitable for fruit cultivation condition in Korea. Thus the standard method have to be developed in order to exactly estimate the carbon accumulation. In foreign studies, the carbon assessments were conducted in apple, peach, olive, grape orchard and so on. On the other hand the estimation of $CO_2$ exchange was carried out for apple and mandarine orchard in Korea. According to these results, fruit orchard is a $CO_2$ sink even though amount of carbon accumulation is smaller than the forest. To introduce certainly fruit orchard as greenhouse gas sink, long-term monitoring and further study have to be conducted under each planting condition.