• Journal of Korea Multimedia Society
• /
• v.11 no.5
• /
• pp.710-727
• /
• 2008

Service-oriented computing systems have been issued by their properties of reducing software development time and effort by reusing functional service units. The reusability of services can effectively promote through loose coupling between services. But strong associations of object-oriented systems such as inheritance and aggregation create a rather tight coupling between objects. The component-based systems without inheritance and aggregation create a loose coupling between components. Thus components provide service realization at runtime using the functionality provided by their interfaces. Therefore legacy component-based systems need to have service-oriented computing concept in order to support functional service units efficiently. Also, conventional methods for service-oriented computing system have not suggested the clear classification of service layers, the clear service identification guideline introducing service layers and a service mapping method between serviceces of each layer. Therefore we suggest the service classification and the identification guideline of business view and implementation view introducing layers and propose a mapping between two views. That is, we research service layers, service identification, diversified service sizes and a service mapping method between services of each layer. This can be applied to legacy component-based system to extend to the service-oriented computing system.

• Journal of Korean Society of Environmental Engineers
• /
• v.38 no.3
• /
• pp.110-116
• /
• 2016

Biogas yields point of view, the possibility of reusing excess sludge treated by thermal pretreatment for the purpose of improving the efficiency of the anaerobic digestion process has been investigated in recent year. Thermal pretreatment technology was considered as a pretreatment technique to improve excess sludge properties because of the solubilization of particulate organics. As a view point of sludge reduction and recycle, however, many researchers focused on the ability of particulate hydrolysis and COD solubilization under a high temperature, and few reports have addressed on the physical/chemical characteristics changing. This research was performed to evaluate the effects of a various temperature and chemical additives on carbon formation and fractionation in treated slurry from thermal pretreatment. Based on the results, it was revealed that oxidants injection and temperature changing have significantly caused the change of carbon fractions in slurry from thermal pretreament. Especially, it was considered that the efficiencies of particle hydrolysis increased with the increase of the reaction temperature. Low molecular weight(Mw < 350 g/mol) organic carbon formation increased with the increase of oxidants injection. It was expected that results of this research will provide an overview of the characteristics of thermal pretreatement for excess sludge reduction and recycle.

• Korean Journal of Construction Engineering and Management
• /
• v.18 no.6
• /
• pp.26-37
• /
• 2017

Preliminary scheduling at the initial stage of planning phase is usually performed with limited information and details. Therefore, the reliability and accuracy of preliminary scheduling is affected by personal experiences and skills of the schedule planners, and it requires enormous managerial effort (or workload). Reusing of historical data of the similar projects is important for efficient preliminary scheduling. However, understanding the structure of historical data and applying them to a new project requires a great deal of experience and knowledge. In this context, this paper propose a framework and methodology for automated preliminary schedule generation based on historical database. The proposed methodology and framework enables to automatically generate CPM schedules for airport projects in the early planning stage in order to enhance the reliability and to reduce the workload by using structured knowledge and experience.

• Journal of Wetlands Research
• /
• v.9 no.1
• /
• pp.69-78
• /
• 2007

Constructed wetlands and other aquatic systems have been successfully used for waste and wastewater treatment in either temperate or tropical regions. To treat waste or wastewater in a sustainable manner, the integrated eco-engineering designs are explained in this paper with 2 case studies: (i) a combination of vertical-flow constructed wetland (CW) with plant irrigation systemfor fecal sludge management and (ii) integrated CW units with landscaping at full-scale application for domestic wastewater treatment. The pilot-scale study of fecal sludge management employed 3 vertical-flow CW units, each with a dimension of $5{\times}5{\times}0.65m$ (width ${\times}$ length ${\times}$ media depth) and planted with cattails (Typha augustifolia). At the solid loading rate of 250 kg total solids (TS)/$m^2.yr$ and a 6-day percolate impoundment, the CW system could achieve chemical oxygen demand (COD), TS and total Kjeldahl nitrogen (TKN) removal efficiencies in the range of 80 - 96%. The accumulated sludge layers of about 80 - 90 cm was found at the CW bed surface after operating the CW units for 7 years, but no clogging problem has been observed. The CW percolate was applied to 16 irrigation Sunflower plant (Helianthus annuus) plots, each with a dimension of $4.5{\times}4.5m$ ($width{\times}length$). In the study, the CW percolate were fed to the treatment plots at the application rate of 7.5 mm/day but the percolate was mixed with tap water at different ratio of 20%, 80% and 100%. Based on a 1-year data of 3-crop plantation were experimented, the contents of Zn, Mn and Cu in soil of the experimental plots were found to increase with increasing in CW percolate ratios. The highest plant biomass yield and oil content of 1,000 kg/ha and 35%, respectively, were obtained from the plots fed with 20% or 50% of the CW percolate, whereas no accumulation of heavy metals in the plant tissues (i.e. leaves, stems and flowers) of the sunflower is found. In addition to the pilot-scale and field experiments, a case study of the integrated CW systems for wastewater treatment at Phi Phi Island (a Tsunami-hit area), Krabi province, Thailand is illustrated. The $5,200-m^2$ CW systems on Phi Phi Island are not only for treatment of $400m^3/day$ wastewater from hotels, households or other domestic activities, but also incorporating public consultation in the design processes, resulting in introducing the aesthetic landscaping as well as reusing of the treated effluent for irrigating green areas on the Island.

• Membrane Journal
• /
• v.26 no.1
• /
• pp.70-75
• /
• 2016

The reuse of wastewater is being diffused to manage and develop the water resources. Generally, the treated wastewater is discharged to the river after being treated to meet the effluent quality standard or reused for diverse uses through the reprocessing. And recently, as the reuse of the treated wastewater is activated, the technologies to utilize for the high quality water resources such as industrial water by reusing the wastewater with Membrane Distillation (MD) are under development. In this study, the direct contact membrane distillation (DCMD) process has been applied to treat sewage discharge water for water reuse. The laboratory scale experiment was performed by using a hydrophobic PVDF membrane with the pore size of $0.22{\mu}m$. The influence of operating parameters, such as feed temperature, feed flow rate, feed concentration, on the permeate flux and rejection has been investigated. All filtration tests were conducted till the feed volume reached a concentration factor of 3.0. Thus, the operating period ranged between 19 hr and 49 hr depending on filtration performance. The results showed that above 92% of TN, TP, COD and TOC in the feed could be rejected regardless of an operating condition. The water flux was ranged from 13.8 to 20.3 LMH. The lowest flux was obtained at the operating condition with the feed temperature of $50^{\circ}C$ and feed flow velocity of 500 mL/min while the highest one was measured with $60^{\circ}C$ and 900 mL/min. When the concentration factor reached 3.0, water flux declined by approximately ranged from 14.5% to 33.3%. But the fouling in MD is almost fully reversible, with more than 90% recovery of permeate water flux following a DI water rinse without the addition of chemical cleaning reagents.

• Korean Journal of Construction Engineering and Management
• /
• v.11 no.6
• /
• pp.89-99
• /
• 2010

Military Barracks and Bachelor Officer's Quarters are public buildings representing architectural characteristics with repeating the same room modules. These buildings require easy dismantling and reusing for the next generation' military re-organization. For these reasons, since 2005, the modular construction has been applied to military buildings. The most important factors required for modular military buildings are standardization, lowcost construction and reusable construction method. However, conventional modular building system have not been matched with these requirements. This study suggests a new modular system for Bachelor Officer's Quarters using Six-sigma design tool. To reflect the voices of customers, market study and surveys were carried out. Through the QFD, the voices of customers were converted into quality characteristics of building system for BOQ. The various design concepts meeting customer's requirement were derived by the QFD and Pugh matrix methodology. The proposed modular building system shows 80% increased factory production rate and 62% decreased weight of steel frame as compared with the conventional modular building system.

• Journal of IKEEE
• /
• v.17 no.4
• /
• pp.570-578
• /
• 2013

This paper proposed an $8{\times}8$ HEVC inverse core transform architecture reusing multipliers. In HEVC core transform, processing of lower size block is identical with even part of upper size block. So an $8{\times}8$ core transform architecture can process both $8{\times}8$ and $4{\times}4$ core transforms. However, when $8{\times}8$ core transform architecture is exploited, frame processing time doubles in $4{\times}4$ core transform, since $8{\times}8$ and $4{\times}4$ core transforms concurrently process 8 and 4 pixels, respectively. In this paper, a novel inverse core transform architecture is proposed based on multiplier reuse. It runs as an $8{\times}8$ inverse core transformer or two $4{\times}4$ inverse core transformer. Its frame processing time is same in $8{\times}8$ and $4{\times}4$ core transforms, and reduces gate counts by 12%.

• Journal of Korea Spatial Information System Society
• /
• v.4 no.2 s.8
• /
• pp.65-74
• /
• 2002

The CBD(component based development) method has recently been on the rise as the main current among all fields of developing Information Systems. The developing system by building and integrating of components is encouraged in GIS sphere. Business domain which considerably identifies components occupies GIS shpere rather then any other sphere. Arithmetic function is quite needed in GIS sphere but non-arithmetic functions are also used in GIS sphere as well as in enterprise sphere. Component is characterized by ensuring the reuse of itself. The efficiency of reusing component is promoted as the component is functionally simple and is packed to a minimum. The GIS Component Extraction Method has already been presented in several studies but this study is about the GIS Component Extraction by the Affinity Analysis Method. CBD uses UML on a basis and the core of the UML is consisted of the use case and the class. The purpose of the Affinity Analysis is a study how relate between the use case and the class in a certain business domain and then the results identify the component. The Affinity Analysis is useful not only in GIS but also in every business domain and is considered to be popular as the procedure of this method is not complex at all.

• The Journal of Society for e-Business Studies
• /
• v.15 no.3
• /
• pp.1-23
• /
• 2010

It is crucially important to exchange and manage the financial information of an organization for the reason of complexity and diversity of information caused by its implicit information involved. Especially, according to the development of information technology, various approaches appeared to manage financial data of organization. For example, XBRL (Extensible Business Reporting Language) is one of the technologies dealing with the above criteria. Basically, XBRL is a business reporting language to define and exchange financial information, such as a financial statement of organization. XBRL is an international standard which enables the exchange of information between information providers and consumers by adding the tags involving the information of circumstantial factors of data. However, XBRL is not able to describe semantics because XBRL is fundamentally based on XML(Extensible Markup Language) having the purpose of expressing and structuring data. Therefore, this paper aims to enable semantic information to XBRL through the semantic technology. The objective of this paper is an ontologization of the knowledge to perform sharing, reusing, discovering, and inferring the knowledge described and conducted by XBRL. In order to achieve the above objective, this paper suggests the methodology for the ontologization of the category and instance document of XBRL. Furthermore, this paper points out the possibility of suggested methodology in a practical business through indicating the advantages of the knowledge described by XBRL.

• Journal of the Korea Society of Computer and Information
• /
• v.16 no.12
• /
• pp.1-10
• /
• 2011

As requirements of embedded system get complicated, the tool for analyzing the reliability of embedded software is being needed. A probabilistic modeling is used as the way of analyzing the reliability of a software and to apply it to embedded software controlling multiple devices. So, it is necessary to specialize that to embedded software. Also, existing reliability analyzers should measure the transition probability of each condition in different ways and doesn't consider reusing the model once used. In this paper, we suggest a reliability analyzer for embedded software using embedded software Markov chin model and a unit testing tool. Embedded software Markov chain model is model specializing Markov chain model which is used for analyzing reliability to an embedded software. And a unit testing tool has host-target structure which is appropriate to development environment of embedded software. This tool can analyze the reliability more easily than existing tool by automatically measuring the transition probability between units for analyzing reliability from the result of unit testing. It can also directly apply the test result updated by unit testing tool by representing software model as a XML oriented document and has the advantage that many developers can access easily using the web oriented interface and SVN store. In this paper, we show reliability analyzing of a example by so doing show usefulness of reliability analyzer.