• Membrane and Water Treatment
• /
• v.5 no.4
• /
• pp.281-293
• /
• 2014

The present work aimed to study the decolorization kinetics and characteristics of a selected azo dye under the influence of two key operational parameters including hydraulic retention time (HRT) and solid retention time (SRT). The decolorization efficiency and the two important criteria of k and normalized k (k/MLSS) were evaluated in lab-scale membrane sequencing batch reactors (MSBRs) at various HRTs of 48, 24 and 16 h (with constant SRT) and in addition, at various SRTs of infinity, 40 and 10 d (with constant HRT). According to the obtained results, both zero and first-order kinetics were properly fitted the decolorization profiles of the selected azo dye in all of the applied HRTs and SRTs. Increase of both HRT and SRT positively affected the decolorization efficiency. More MLSS concentrations corresponded to the lower HRTs and the higher SRTs resulted in higher decolorization rate constants (k). However, the effect of reducing the HRT was not compensated by increase of the MLSS concentration in order to reach higher decolorization efficiency. In addition, increase of the decolorization efficiency, as a consequence of the higher MLSS concentrations at longer SRTs, was restrained by decrease of the time-limited decolorization capability of biomass (represented by normalized k). Evaluation of both k and normalized k is suggested in order to have a more precise study on the decolorization kinetics and characteristics.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.52 no.2
• /
• pp.88-95
• /
• 2016

Most grid sorting has been used to sort out flatfish in shrimp fisheries, while double grid systems have been tested to separate smaller shrimp. The escape of juvenile red seabream through separating panels made with steel grids or large mesh tested for masking effects in a two-species system. Fish behavior was observed in a circulating water tank. The escape rate was 20% greater with the separating codends than with the normal codend in the single-species experiments. The rates in the two-species experiments were 30% or 20% greater than the single-species rates for the normal or separating codends, respectively. The seabream retention rates in the grid separator codend decreased as rockfish retention increased, possibly due to a threat effect. Conversely, the retention rate of both species increased concurrently in the net separator, possibly due to a masking effect. The escape rates of juvenile red seabream varied by compartment in the mesh separating codend. These results suggest that grid separating codends can be used in the field as towed fishing gear to reduce juvenile catch.

• Membrane and Water Treatment
• /
• v.5 no.3
• /
• pp.183-195
• /
• 2014

The efficiency of two metal ions (cadmium, zinc) removal from aqueous solutions by ultrafiltration (UF) and Polymer Enhanced Ultrafiltration (PEUF) processes were investigated in this work. The UF and PEUF studies were carried out using an ultrafiltration tangential cell system equipped with 5.000 MWCO regenerated cellulose. A water-soluble polymer: the polyacrylic acid (PAA) was used as complexant for PEUF experiments. The effects of transmembrane pressure, pH, metal ions and loading ratio on permeate fluxes and metal ions removals were evaluated. In UF process, permeate fluxes increase linearly with increasing pH for different transmembrane pressure, which may be the consequence of the formation of soluble metal hydroxyl complexes in the aqueous phase. In PEUF process, above pH 5.0, the Cd(II) retention reaches a plateau at 90% and Zn(II) at 80% for L = 5. Also, cadmium retention at different L is greater than zinc retention at pH varying from 5.0 to 9.0. In a mixture solution, cadmium retention is higher than zinc for different loading ratio, this is due to interactions between carboxylic groups of PAA and metal ions and more important with cadmium ions.

• The Journal of the Korean dental association
• /
• v.15 no.11
• /
• pp.763-766
• /
• 1977

The Purpose of this study was to observe force required to remove some kinds of pin from dentin. The teeth were embedded within a resin cylinder and the occlusal surface was sectioned at a right angle to the axis of the cylinder to expose dentin surface. Thread mate system pin (minim and regular), friction Iocked pin and cemented pin were tested Pin holes were drilled by handpiece and depths of pin holes were tested 1,2 and 3mm. After insertion of the pins into pinhole, tensile loading was performed on the Instron testing machine at the speed of 0.5 inch/min. Results were follewed: 1. In retention, the cemented pins are the least, the friction locked pins intermediate and the self threading pins the greatest in all pins. In self threading pins, regalar pin has greater retention than minim pin 2. The deeper the depth of the pin hole is, the more the retention of the pin increases.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.50 no.3
• /
• pp.250-256
• /
• 2017

This study investigated the removal efficiency of organic matter and nitrogen from fish farm effluent by hydraulic retention time (HRT) using an upflow biological filter (ANR system) reactor. The recycling time and influent flow in the reactor were controlled to 14.8, 7.4, 5.5 and 3.2 h to evaluate HRT. In addition, each reactor was coupled to a fixed bed upflow filter charged with media. The results showed that removal efficiency was ${\geq}95%%$ with an HRT of 5.5 h, and nitrification efficiency was reduced to 81% with an HRT of 3.2 h, although nitrification efficiency temporarily decreased due to the shock load as HRT decreased. Total nitrogen removal rate was also reduced to about 65% with an HRT of 3.2 h, which was considered a washout effect of nitrifying and denitrifying microorganisms by increasing the shearing force to the filter media, which decreased organic matter and nitrogen removal efficiency.

• Journal of environmental and Sanitary engineering
• /
• v.11 no.3
• /
• pp.63-68
• /
• 1996

This study was to discuss limiting factors influenced on the removal efficiencies of nitrogenous compounds investigated using the polypropyrene media which was to attach microorganism in order to apply the fixed-biofilm process. The main limiting factors are the hydraulic retention time (HRT), C/N ratio, $COD/NO_{3}-N$ ratio and temperature. The hydraulic retention time HRT were 6, 8, 10, 12 hrs and the C/N ratio range was 2.5-9.5. The $COD/NO_{3}-N$ ratio range was 3.2-21.9 and the temperature were 15, 20, 25, 30, $35^{\circ}C$, respectively. The results of this study are summerized as follows. 1. Hydraulic retention time (HRT) to obtain removal efficiencies of T-N higher than 85% had to be 10 hrs above. 2. The removal efficiencies of T-N decreased at C/N ratio from 6.2 to 4.8 in this anoxic-contact aeration system. 3. Denitrification rate decreased at $COD/NO$_{3}$-N$ ratio from 8.0 to 5.0 4. As temperature increased, removal efficiencies of T-N increased.

• Textile Coloration and Finishing
• /
• v.26 no.2
• /
• pp.124-130
• /
• 2014

The aim of this study is to utilize the algae extracts with functionalities such as antioxidant and antimicrobial properties for preparing lip balm. Functional properties of extracts from Dictyota coriacea and Ulva pertusa were evaluated in terms of DPPH radical scavenging activity and antimicrobial activity. Lip balms contained the algae extracts were tested its efficacy by measuring the moisture retention of lip skin after applying human subjects. According to the results of skin moisture retention measurement, lip balm was effective to increase the moisture retention of lip skin. It is considered that the utilization of colorants extracted from algae which are verified of antioxidant effect and antimicrobial activity is valuable and useful in developing the cosmetic products.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.11 no.17
• /
• pp.25-37
• /
• 1988

Joint inventory 방법을 다룬 기존의 연구는 생산비용이 일정하다는 조건만을 고려하였다. 본 논문은 기존의 연구에다 새로운 변수(learning curve ratio and learning retension)를 제조업자 측면에서 고려하여 보다 확장된 모델을 다룬다. Joint inventory 모델은 첫째 단일구매자와 둘째 학습곡선비율과 learning retention의 정도에 있어서 그 범위를 결합시키는데 이용되기 위해 개발되어 졌다. 구매자와 제조업자를 위한 로트 사이즈를 결정하기 위하여 증분비용접근방법 (Incremental Cost Approach, ICA)을 쓴다. 총결합비용은 기존모델보다 현저하게 적은데 그 이유는 학습과 learning retention 효과로 인한 제조업자의 생산비 절감과 재고유지 비용의 감소 때문이다. 학습과 learning retention이 현격한 경우, 총결합비용은 제조업자와 구매자의 개별적인 최적정책에서의 비용합(합)보다 적다. 소개된 모델의 효과를 보이기 위해 수치예제를 이용하였다.

• Environmental Engineering Research
• /
• v.19 no.2
• /
• pp.165-174
• /
• 2014

A model combining multi-dimensional discretized population balance equations with a computational fluid dynamics simulation (CFD-DPBE model) was developed and applied to simulate turbulent flocculation and sedimentation processes in sediment retention basins. Computation fluid dynamics and the discretized population balance equations were solved to generate steady state flow field data and simulate flocculation and sedimentation processes in a sequential manner. Up-to-date numerical algorithms, such as operator splitting and LeVeque flux-corrected upwind schemes, were applied to cope with the computational demands caused by complexity and nonlinearity of the population balance equations and the instability caused by advection-dominated transport. In a modeling and simulation study with a two-dimensional simplified pond system, applicability of the CFD-DPBE model was demonstrated by tracking mass balances and floc size evolutions and by examining particle/floc size and solid concentration distributions. Thus, the CFD-DPBE model may be used as a valuable simulation tool for natural and engineered flocculation and sedimentation systems as well as for flocculant-aided sediment retention ponds.

• Journal of the Korea Society for Simulation
• /
• v.14 no.4
• /
• pp.19-30
• /
• 2005

Due to explosive expansion in R & D efforts for advancement of technological predominance by Enterprises, the volume of technical information rapidly increases and emphasize on the valuation of this information has grown ever increasingly important. Therefore the requirement for systematic management and safeguard and accumulation of these intellectual properties of the Enterprise is in very high demand. A lot of effort and research has been carried out and many on going studies in progress to try to derive the optimum solution on how to manage information retention policy, processes, execution method, and hardware to execute the information with and etc. The intent of this thesis is to recommend a way for the Enterprise on how to evaluate the valuation of the data and to suggest the method on how to manage these intellectual properties by way of using Information Lifecycle Management theory which manages data according to the business valuation of the data. The decision on valuation of data and retention cycle is based on analytic method of a nonparametric regression, experimentation was carried out by applying to Enterprise Document Management System to present the suitable retention cycle according to the valuation and variety of attribute of data.