• Geomechanics and Engineering
• /
• 제17권5호
• /
• pp.413-420
• /
• 2019

The changes in earth pressure and ground settlement due to underground excavation near an existing retaining wall were studied experimentally according to the separation distance between the underground excavation and the retaining wall. In addition, this study attempted to experimentally prove that the arching phenomenon occurred during the construction of the underground space. A model tank having 120 cm in length, 160 cm in height, and 40 cm in width was manufactured to simulate underground excavation through the use of five separated base wall bodies. The variation of earth pressure on the retaining wall was measured according to the underground excavation phase through the use of 10 separated right wall bodies. The results showed that the earth pressure on the retaining wall was changed by the lowering of the first base bottom wall; however, the earth pressure was not changed significantly by the lowering of the third base bottom wall, since the third base wall had sufficient separation distance from the retaining wall. Lowering of the first base wall induced a decrease in the earth pressure in the lower part of the retaining wall; in contrast, lowering of the first base wall induced an increase in the earth pressure in the middle part of the retaining wall, proving the arching effect experimentally. It is necessary to consider the changes in earth pressure on the retaining wall in designing earth retaining structures for sections where the arching effect occurs.

• 기술발표회
• /
• 통권2006호
• /
• pp.162-171
• /
• 2006

Segmental Grid Retaining Wall is one of the segmental grid retaining walls using headers and stretchers to establish the framework of the wall In this method, grids formed by the intersection of headers and stretchers are generally filled with the gravel to maintain the weight of the wall Therefore, the construction can be carried out with higher speed and much economically when compared with the concrete retaining wall Furthermore, it has high drain capacity, and environmentally friendly aspects also have been pointed out because the possibility of the planting at the front of the wall However, in the segmental grid retaining wall method, the relative movement between the individual headers and stretchers was generally recognized, and stress redistribution in the gravel filling was also observed when subjected to the external loading and self-weight of filling Therefore, it has been thought that the distribution of the earth pressure in the segmental grid retaining wall system differ from that of the concrete retaining wall In this study, the surcharge tests using the scaled model segmental grid retaining wall was carried out to observe the distribution of the earth pressure in the segmental grid retaining wall The earth pressure was measured in the six specified height of wall, and the distribution of the pressure was analyzed. Furthermore, the earth pressure by computation or by the test using the concrete retaining wall was also considered to make comparison

• 한국환경복원기술학회지
• /
• 제7권6호
• /
• pp.19-28
• /
• 2004

Segmental Retaining Wall(SRW) has been variously applying in Civil and Architecture construction. Recently, the application of environmental element in all type's structures came to essential requirement, and the construction cases of retaining wall using reinforced soil and block are more increased than the past. But, this trend more widely was spread environmental element as landscape work for the backside of reinforced retaining wall as well as block itself. New environmental block, Greenstone Block, developed to apply of this tendency. The retaining wall system using Greenstone can be environmental constructing at both block itself and backside of retaining wall. The material tests, the axial compressive strength test of block and bending test of fiber-pipe, exercised to design and construction of vertical SRW, which were satisfied NCMA standard. Through this procedure, Rewall (ver 1.0) was developed, which can be automation design of SRW including internal stability, external stability and local stability. And these can be considered setback of retaining wall, as well the examples of vertical retaining wall using block presented to satisfying the follows; strength of reinforced geotextile, height of retaining wall, surcharge, types of backfill and groundwater level etc. Many problems investigated on after or before of construction were due to local failure, insufficiency of bearing capacity and groundwater level. Especially, the local failure was many occurred to during compaction or after construction, and the cases of SRW construction is similar to the results of model test on vertical SRW.

• 한국지반환경공학회 논문집
• /
• 제11권6호
• /
• pp.39-46
• /
• 2010

기존의 보강토 옹벽의 연구는 보강토 옹벽의 내적 외적파괴에 중점이 되어 연구가 이루어져 왔고 외부 충격에 관한 연구는 지진에 관한 것이 전부인 것이 현실이다. 도로의 발달로 인해서 도로 주변의 보강토 옹벽에 차량의 충돌 같은 외부 충격을 받는 경우가 늘어나고 있다. 그래서 본 연구에서는 신뢰도를 인정받고 있는 범용 유한요소 프로그램인 LS-DYNA를 사용하여 도로 주변 보강토 옹벽을 모델링하였고, NCAC에서 제공하는 8톤 중량의 Ford single unit truck을 이용하여 차량속도에 따른 보강토 옹벽의 거동 양상을 분석하였다. 그리고 향후 도로 주변에 시공되어지는 보강토 옹벽의 충돌에 관한 안정성을 확보하기 위해서 하단에 중력식 옹벽을 적용하였고 또한 높이를(0.5m, 1.0m, 1.5m) 변화시켜가면서 수치해석을 수행하여 보강토 옹벽의 거동을 분석하고 보강토 옹벽의 안정성을 확인 하였다.

• 기술발표회
• /
• 통권2006호
• /
• pp.156-161
• /
• 2006

Recently, construction of soil-reinforced segmental retaining walls which used geosynthetics are being increased day by day due to its construction efficiency, economic efficiency, and its aesthetic view. The conventional reinforced earth retaining wall has the connector system to fix the reinforcement and block However, this system may cause the crack of block and the rupture of reinforcement due to the stress concentration near the face of reinforced earth retaining wall In this study, the new connector system, which is able to allow the settlement of reinforcement, was applied to analyze the effect of connector system of reinforced earth retaining wall The connection strength tests and centrifugal tests for both the conventional reinforced earth retaining wall and the settlement reinforced earth retaining wall were performed to compare the results

• 한국환경과학회지
• /
• 제16권9호
• /
• pp.1099-1102
• /
• 2007

This paper presents eco-friendly planting method to overcome the problems of existing concrete retaining wall and gabion retaining wall, respectively, based on the examination on existing concrete and gabion retaining wall. Prior to doing this, proper design method was provided through pull out test. Planting method using gabion metal net and L shape green net retaining wall were compared and analyzed. According to this study, it is confirmed that reduction of construction period and economical profit in construction can be achieved by both manufacturing at the factory and self procurement at the job site as well as the use of metal net, which is applied as a substitution of existing strengthening material. For the effect of planting method, the use of L shape green net retaining wall shows superiority to environment-friendly gabion retaining wall in its ability to rootage and germination of the grass. The L shape green net retaining wall had excellent performance in helping rootage of grass and prevention of soil leakage, and even if raining period, remarkable damage of planting mat does not occur when planting mat is applied.

• Earthquakes and Structures
• /
• 제14권2호
• /
• pp.179-186
• /
• 2018

We present the accurate investigation the seismic behavior of the gravity retaining wall built near rock face based on numerical method. The retaining wall is a useful structure in geotechnical engineering, where the earthquake is a common phenomenon; therefore, the evaluation of the behavior of the retaining wall during an earthquake is essential. However, in all previous studies, the backfill behind the wall was usually approximated by a homogeneous region, while in contrast, in practice, in many cases retaining walls are used to support the soil pressure in, inhomogeneous, mountainous area. This suggests an accurate investigation of the problem, i.e., numerical analysis. The numerical results will be compared with some of recently proposed analytical methods to show the accuracy of the proposed method. We show that increasing the volume of the rock face yields decreasing the permanent horizontal displacement of the gravity retaining wall built near rock face. Besides, we see that the permanent horizontal displacement of the gravity retaining wall with homogenous backfill is more than permanent horizontal displacement of the gravity retaining wall case of the built near rock face in different frequency contents.

• 한국지반환경공학회 논문집
• /
• 제7권6호
• /
• pp.23-34
• /
• 2006

본 연구에서는 보강재의 침하를 허용하는 침하형 보강토 옹벽의 거동을 평가하기 위하여 원심모형실험을 수행하였다. 실험결과는 연결부의 침하를 허용하지 않는 일반형 보강토옹벽에 대한 결과와 비교 분석하여 침하형 보강토 옹벽의 안정성을 평가하였다. 모형실험에서 전면판은 알루미늄판을 사용하였으며, 보강재는 알루미늄 호일을 이용하였으며, 뒤채움지반은 화강풍화토를 사용하였다. 실험결과, 침하자유형 보강토옹벽은 80g의 중력수준에서 완전한 파괴상태에 도달하였으며, 일반형 보강토 옹벽이 69g의 중력수준에서 파괴된 것을 감안하면 침하자유형 보강토 옹벽이 안정성이 우수하다는 것을 확인할 수 있었다. 또한, 69g에서 침하자유형 보강토옹벽 저면에서의 수직토압이 일반형에 비해 16% 정도 크게 측정되었다.

• 한국지반신소재학회논문집
• /
• 제16권4호
• /
• pp.43-55
• /
• 2017

본 연구에서는 교통시설 하부구조인 옹벽(중력식 옹벽)에 가해지는 수평토압의 크기에 교통하중이 미치는 영향을 파악하였다. 교통시설 하부구조인 옹벽에서 상부 교통하중이 옹벽 안전성에 미치는 영향에 관한 연구가 부족한 실정이다. 교통하중으로 인해 옹벽에 유발되는 수평토압은 도로의 차선 수, 차량 하중의 크기 및 옹벽으로부터 떨어진 거리 등의 영향을 받을 것이다. 따라서 이들 변수를 대상으로 수치해석한 결과, 차량하중 이격거리가 옹벽 높이보다 클 경우 수평토압의 변화는 미미하였다. 따라서 상부에 교통하중을 받는 도로옹벽 설계 시 옹벽내측으로부터 교통하중까지의 이격거리가 옹벽의 높이 내의 교통하중만을 고려하는 것이 실용적이고 합리적이다.

• 한국환경과학회지
• /
• 제11권11호
• /
• pp.1183-1187
• /
• 2002

Existing retaining walls are usually made from only one cast form and any damage must be promptly repaired. However, when a part of a retaining wall is repaired, a gap can be created between the repaired and existing parts, along with an unpleasing visual effect. As such, the whole structure is often reconstructed, rather than repairing one part, resulting in construction waste and possible contamination of the environment. Accordingly, the current study proposes a construction method for a retaining wall that uses separate blocks to downsize of quantity of construction waste. In addition, by changing the color or modifying the block cover a more environmentally friendly retaining wall construction method is achieved.