• Journal of The Korean Society of Integrative Medicine
• /
• v.8 no.4
• /
• pp.133-142
• /
• 2020

Purpose : The purpose of this study was to investigate the effective recovery method of exercise-induced fatigue and muscle pain by comparing the effect of the use of illite hot mat product and general hot mat product on the recovery of muscle pain induced by high intensity exercise. Methods : To measure and analyze the changes in lactic acid, CRP, and ACR according to the high-intensity circuit training program, this study was conducted for the healthy adult men and women, who exercise st the K-region sports center. A total of 45 subjects were studied in 15 groups of 15 patients who received an illite hot-water mat recovery group (A group), 15 general hot-water mat recovery group (B group), and 15 control group (C group). The circuit training exercise program was conducted as a one-time exercise, and each exercise time consisted of 30 minutes of warm-up exercise, 5 minutes of main exercise, 20 minutes of clean-up exercise, and 5 minutes of strength exercise. The intensity setting was high intensity of subjective exercise intensity It carried out by setting to (14-16RPE). Results : Changes in Lactic Acid Concentration There was a significant difference in the lactic acid concentrations between the groups after the high intensity circuit training program (p <.05). The illite rest group (A) decreased 7.71 mmol / L and the control group decreased 4.03 mmol / L. Significantly decreased (p <.05). Changes in ACR Concentration. There was a significant difference in the ACR concentrations Significant differences were found in CRP and ACR during the recovery period after exercise. (p <.05), the elite rest group (A) decreased 2.47 mg / mmol, and the control group increased 1.63 mg / mmol. There was a significant difference (p <.05). Conclusion: The static rest on a heated mat after high-intensity exercise has an effect on changes in blood lactate and ACR levels.

• Journal of Life Science
• /
• v.13 no.4
• /
• pp.448-456
• /
• 2003

The purpose of this study was to determine changes in their cardiorespiratory function and body composition in female workers after aerobic exercise and circuit weight training. The subjects of this study were 16 female workers in B city and was divided into exercise and control groups which were composed of 8 people respectively. The members of exercise group had aerobic exercise and circuit weight training an hour a day, 5 days per week, for 8 weeks while controled group did not. Both groups were pretested and posttested, and the results of this study on cardiorespriatory function and body composition are as follows. Exercise group showed significant decrease in heart rate at rest(p<.001). Exercise group showed significant increase in the oxygen uptake at rest, in the maximum oxygen uptake and in the vital capacity(p<.001). Exercise group showed significant decrease in the %fat and fat(p<.001). Exercise group showed significant increase in the %LBM and LBM(p<.001).

• The Transactions of the Korean Institute of Power Electronics
• /
• v.20 no.5
• /
• pp.389-394
• /
• 2015

This paper proposes a series-connected power conversion system that integrates a photovoltaic power conditioner and a charge-balancing circuit. In conventional methods, a photovoltaic power conditioner and a cell-balancing circuit are needed for photovoltaic systems with energy storage devices, which results in a complex configuration and high cost. To overcome these problems, a series-connected DC-DC power conditioning system that integrates a photovoltaic power conditioner with a charge-balancing circuit is proposed. During the generation, the system operates as power conditioner only, whereas it operates as a cell balancing circuit during the rest time. For the analysis, the operating principle of the circuit and the controller design are done by PSIM simulation. For verification, a hardware prototype with 48-W photovoltaic modules has been implemented. Results verified that the modularized photovoltaic power conversion system with a series-connected storage successfully works with the proposed method.

• Journal of Korean Medicine for Obesity Research
• /
• v.4 no.1
• /
• pp.95-123
• /
• 2004

Objects: This study was aimed to find out correlation between life style and cardiopulmonary function and body fat. Methods: We divided two groups by the score of behavior modification therapy questionnaire. Westudied tendency of change of cardiopulmonary function and body fat for medication of Mahuang capsule by ergogenic aids and placebo with circuit training. We got the results for Exercise stress test and Segmental Bioelectrical Impedence Analysis. Results: 1. High Score Group in Behavior Modification Therapy Questionnaire significantly(p<.05) showed elevation of Lean Body Mass, Body Fat, Waist Circumference and not significantly elevation of Body Weight, But Basal Metabolic Rate was declined. Low Score Group in Behavior Modification Therapy Questionnaire significantly(p<.05) showed elevation of Waist Circumference and not significantly elevation of Body Weight and Body Fat, Lean Body Mass but decline of Basal Metabolic Rate, Waist to Hip Ratio 2. High Score Group in Behavior Modification Therapy Questionnaire significantly(p<.05) showed elevation of $VO_{2max}$ and not significantly elevation of the rest. Low Score Group in Behavior Modification Therapy Questionnaire significantly(p<.05) showed elevation of rest Heart Rate, Diastolic Blood Pressure, and not significantly elevation of the rest except for METs Conclusion: High score group in Behavior Modification Therapy Questionnaire showed significantly elevation of body composition, but had no relationship with Cardiopulmonary function

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.14 no.6
• /
• pp.706-711
• /
• 2014

A low power 6-bit flash ADC that uses an input voltage range detection algorithm is described. An input voltage level detector circuit has been designed to overcome the disadvantages of the flash ADC which consume most of the dynamic power dissipation due to comparators array. In this work, four digital input voltage range detectors are employed and each input voltage range detector generates the specific clock signal only if the input voltage falls between two adjacent reference voltages applied to the detector. The specific clock signal generated by the detector is applied to turn the corresponding latched comparators on and the rest of the comparators off. This ADC consumes 68.82 mW with a single power supply of 1.2V and achieves 4.3 effective number of bits for input frequency up to 1 MHz at 500 MS/s. Therefore it results in 4.6 pJ/step of Figure of Merit (FoM). The chip is fabricated in 0.13-um CMOS process.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.36 no.2
• /
• pp.140-147
• /
• 1987

In this paper, seven-order elliptic low-pass passive network is synthesized by using doublyterminated ladder network is directly transformed into the active network which has the advantage of low sensitivity and can be realized conveniently. The circuit simulation results of passive network and active network synthesized with FDNR and Leap-frog technique are compared, and it is proved that the two rest work has the same characteristics.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.4
• /
• pp.1777-1783
• /
• 2012

In this paper, a new motor driving circuit is designed to improve the output performance of DC motor, and a controller is developed with the designed circuit. By the designed driving circuit, a controller can continuously drive DC motors by a transformer which has switching signals of a self-generated circuit to operate it. And while the DC motor have a maximum velocity, the reference voltage can be maintained higher value than that of triangle voltage and it makes the DC motor driving transistor ON and maximum power. A 24V-500W DC motor controller is developed with the proposed motor driving circuit, and also a small electric car is made and the driving test of it is executed. The test results shows that it can continuously control go and back speed of motor with 12A driving current. And also, it is verified that the over current and heat detecting function is operating correctly and the rest value of the used battery can be displayed as 6 step from 20 to 100%.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.38 no.3
• /
• pp.31-39
• /
• 2001

In this paper, we proposed a new pixel circuit of the CMOS image sensor for high dynamic range operation, which is based on a multiple sampling scheme and a conditional reset circuit. To expand the pixel dynamic range, the output is multiple-sampled in the integration time. In each sampling, the pixel output is compared with a reference voltage, and the result of comparison may activate the conditional reset circuit. The times of conditional reset, N, during the integration will contribute to the increase of the dynamic range by the times of N. The test chip was fabricated with 0.65-${\mu}m$ CMOS technology (2-P, 2-M).

• Journal of Electrical Engineering and Technology
• /
• v.13 no.5
• /
• pp.2134-2143
• /
• 2018

This work introduces a fault diagnosis method for transformer based on self-powered radio frequency identification (RFID) sensor tag and improved Hilbert-Huang transform (HHT). Consisted by RFID tag chip, power management circuit, MCU and accelerometer, the developed RFID sensor tag is used to acquire and wirelessly transmit the vibration signal. A customized power management including solar panel, low dropout (LDO) voltage regulator, supercapacitor and corresponding charging circuit is presented to guarantee constant DC power for the sensor tag. An improved band restricted empirical mode decomposition (BREMD) which is optimized by quantum-behaved particle swarm optimization (QPSO) algorithm is proposed to deal with the raw vibration signal. Compared with traditional methods, this improved BREMD method shows great superiority in reducing mode aliasing. Then, a promising fault diagnosis approach on the basis of Hilbert marginal spectrum variations is brought up. The measured results show that the presented power management circuit can generate 2.5V DC voltage for the rest of the sensor tag. The developed sensor tag can achieve a reliable communication distance of 17.8m in the test environment. Furthermore, the measurement results indicate the promising performance of fault diagnosis for transformer.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• v.9 no.2
• /
• pp.685-688
• /
• 2005

An efficient sustain driver and a useful reset circuit composition technique are proposed for plasma display panel drive. The proposed sustain driver uses a series resonance between an external inductor and a panel to recover the energy dissipated by a capacitive displacement current of PDP. It consists of four switching devices, an inductor, and external capacitors, which supply sustain voltage sources. Although the amplitude of an input voltage source is twice as high as that of conventional sustain drivers, average voltage stress imposed on power switching devices is nearly same in their values. Moreover, the input voltage source can be directly applied for the use of a reset voltage source. Owing to this scheme, the proposed sustain driver and the embedded reset circuit have a simple configuration. The operational principle and design example are given with theoretical analyses. The validity of the proposed drive system is verified through experiments using a prototype equipped with a 7.5-inch-diagonal AC plasma display panel.