• 한국전자파학회논문지
• /
• 제26권11호
• /
• pp.1027-1030
• /
• 2015

항공 SAR(Synthetic Aperture Radar)에서는 일반적으로 바람과 같은 외부 영향에 의해 발생한 요동으로 인해 해상도가 저하될 뿐만 아니라, 사이드로브가 증가하게 되어 영상 화질이 저하되므로 본 논문에서는 사이드로브를 감소시키기 위한 기법을 제시한다. 이를 위해 비행경로를 분할한 다음, 분할된 경로에서 획득된 각각의 데이터에 대해 스퀸트 각도를 추정하여 임무영역을 계산한다. 또한, 재설정된 임무영역 중심에 대하여 1차 요동보상을 수행한 후, 생성된 SAR 영상에서 사이드로브 영향이 두드러지는 영역을 추출한 다음에, 사이드로브 감소 필터를 반복적으로 적용한 후 전체 영상에 대해 확장하여 영상 화질을 향상시키는 방법을 제시한다.

• 대한의용생체공학회:학술대회논문집
• /
• 대한의용생체공학회 1998년도 추계학술대회
• /
• pp.96-97
• /
• 1998

3D TOF MR Angiography is able to obtain thinner slice thickness, higher SNR, therefore higher spatial resolution than 2D TOF MR Angiography. Since it uses longer TR than 2D TOF MRA to allow stronger in-flow effect, the background tissue may not be fully saturated. Thus background tissue signal can be further suppressed by MTS(Magnetization Transfer Saturation). Flow-compensation was accomplished by GMN(Gradient Moment Nulling), and tracking saturation was used to suppress vein signal. The different flow signal at the entry of the slab and output of the slab can be compensated by TONE(Tilted Optimized Non-saturating Excitation) RF pulse.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2006년도 춘계학술대회 논문집
• /
• pp.31-32
• /
• 2006

A signal conditioning circuit for capacitive sensors was developed using a commercial single chip solution. Since capacitive displacement sensors can achieve high resolution and linearity, they have been widely used as precision sensors within the range of several hundred micrometers. However, they inherently have a limitation in low frequency range and some nonlinearity characteristics and so a specially designed signal conditioning circuit is needed to handle these properties. Up to now, several companies already have succeeded in the development of the capacitive sensors system and they are commercially available in the market. In this research, to construct the signal processing circuits more easily and simply, we used a universal LVDT signal conditioner (AD698). Since the AD698 provides one chip solution for a basic signal processing including modulation and demodulation using various internal components, we can build the processing circuits successfully with minimal additional circuits: a compensation circuits for the drift caused by the bias current of OP amplifiers and a fine adjustment circuit for the elimination of nonlinearity. The signal processing circuits shows nonlinearity less than 0.05% in the comparison with a laser interferometer.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제5권12호
• /
• pp.2355-2373
• /
• 2011

Vision-based vehicle detector systems are becoming increasingly important in ITS applications. Real-time operation, robustness, precision, accurate estimation of traffic parameters, and ease of setup are important features to be considered in developing such systems. Further, accurate vehicle detection is difficult in varied complex traffic environments. These environments include changes in weather as well as challenging traffic conditions, such as shadow effects and jams. To meet real-time requirements, the proposed system first applies a color background to extract moving objects, which are then tracked by considering their relative distances and directions. To achieve robustness and precision, the color background is regularly updated by the proposed algorithm to overcome luminance variations. This paper also proposes a scheme of feedback compensation to resolve background convergence errors, which occur when vehicles temporarily park on the roadside while the background image is being converged. Next, vehicle occlusion is resolved using the proposed prior split approach and through reasoning for rule-based tracking. This approach can automatically detect straight lanes. Following this step, trajectories are applied to derive traffic parameters; finally, to facilitate easy setup, we propose a means to automate the setting of the system parameters. Experimental results show that the system can operate well under various complex traffic conditions in real time.

• 한국소음진동공학회논문집
• /
• 제14권8호
• /
• pp.726-733
• /
• 2004

On-line phase tracking of an extrinsic Fabry-Perot interferometer (EFPI) and experimental vibration control of a composite beam with a sensing-patch are investigated. We propose a sensing-patch for the compensation of the interferometric non-linearity. In this paper. a sensing-patch that comprises an EFPI and a piezo ceramic(PZT) is fabricated and the characteristics of the sensing-patch are experimentally investigated. A simple and practical logic is applied for the real-time tracking of optical phase of an interferometer Experimental results show that the proposed sensing-patch does not have the non-linear behavior of conventional EFPI and hysteresis of piezoelectric material. Moreover, it has good strain resolution and wide dynamic sensing range. Finally, the vibration control with the developed sensing-patch has been performed using Fuzzy logic controller, and the possibility of sensing-patch as a sensoriactuator is considered.

• 한국산업융합학회 논문집
• /
• 제23권4_1호
• /
• pp.559-567
• /
• 2020

As the renewable energy market grows, grid-connected inverters have been improving and expanding in several fields in recent years because energy conversion devices are the main components of solar systems. In this paper, a high-precision new grid-connected three-phase inverter system is proposed. The proposed system consists of a main inverter, a sub inverter and a transformer. The main inverter operates at a low switching frequency and high power and transmits power to the grid. A sub-inverter connected in series with the transmission line through a matching transformer operates at lower power than the main inverter to provide input values to the transformer. The transformer acts as a power supply according to the voltage compensation value. This study is based on the principle of operation of the UPFC(Unified Power Flow Controller) structure used to regulate power flow in AC transmission lines. The grid-connected inverter system proposed in this paper is implemented with high precision and high resolution. The proposed system was verified through its ability to enhance and ensure the safety of the proposed system through simulation and experiment.

• 융합신호처리학회논문지
• /
• 제3권2호
• /
• pp.83-88
• /
• 2002

본 논문에서는 온도보상과 POS 접속이 가능한 LPG 충전제어시스템을 구현하였다. 이 시스템은 16-bit 80C196 마이크로프로세서와, RAM, ROM, 비디오 driver, 프로그램주변소자 등으로 구성된다. 가스 유량계로부터의 부호화 유량신호와 장치교정 값, 온도센서로부터의 변환된 전압 값을 근거로 정확한 가스 충전량을 계산하고 솔레노이드 밸브를 on/off 함으로 충전량을 제어한다. 온도보상은 LP 가스 온도의 10-bit 아날로그-디지털변환에 의하여 0.5$^{\circ}C$의 분해능으로 이루어지며 온도보상의 범위는 영하 30도에서 영상 70도까지 가능하다.

• 한국정밀공학회지
• /
• 제31권5호
• /
• pp.403-409
• /
• 2014

For ground-based telescope application, the performance assessment of tip-tilt actuator is important because the optical quality of telescope depends upon the windshake compensation ability of the fast steering secondary mirror. But it is difficult to measure the performance characteristics of the actuators due to the large size mirror and test facilities including the vacuum support and structural frame. In this paper, the full-scale tip-tilt test bed for the large size secondary mirror with diameter of 1m is built and the several tests are performed including the range, resolution and frequency response function. From the measurement results, it is shown that the tip-tilt actuator can successfully compensate the windshake with frequency of maximum 12 Hz and be a candidate for the Giant Magellan Telescope.

• 한국지능시스템학회논문지
• /
• 제17권7호
• /
• pp.913-918
• /
• 2007

본 논문에서는 인간과 로봇의 인터액션을 위해 연속된 이미지 정보로부터 얻을 수 있는 색상(color)과 기울기(gradient) 정보를 이용하여 인간 몸의 실루엣 추출 기법을 제안한다. 연속된 이미지 정보로부터 얻어진 RGB 영상 정보에서 색상 배경 제거 기법은 각각의 신체 비율 정보로부터 추출된 모션 영역 정보에서 색상 공판별 평균 이미지 정보를 얻고 옷 색상 정보를 볼록 합하여 계산된다. 기울기 배경 제거 기법은 공간상 정보와 시간상 정보의 볼록 합으로 계산된다. 최종적으로 색상 정보와 기울기 정보의 볼록 합을 하여 인간 몸의 실루엣을 추출한다. 마지막으로, 실험을 통하여 제안된 기법의 성능을 확인하였다.

• 항공우주시스템공학회지
• /
• 제9권4호
• /
• pp.23-30
• /
• 2015

The focal plane image stabilization for a camera is one of the most effective method that can increases the digital camera's image quality by compensating the vibration disturbance. The optical image stabilization can be implemented by making the focal plane to trace the path of incident light. To control the position of focal plane motion compensating stage precisely, a nonlinear control algorithm has been applied by considering coulomb friction which is nonlinear behavior of the compensator system. In our study, we have analyzed the hand shaking vibration using the gyro sensor, and made a mathematical model of compensating stage containing optical sensor and piezo-actuator. Then the nonlinear control algorithm has been designed and its performance has been verified by experiment. In this study, a friction driven peizo-electric actuator with $1{\mu}m$ resolution and 10mm/s speed has been used for stage movement.