• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.410-410
• /
• 2013

Next-generation nonvolatile memory (NVM) has attracted increasing attention about emerging NVMs such as ferroelectric random access memory, phase-change random access memory, magnetic random access memory and resistance random access memory (RRAM). Previous studies have demonstrated that RRAM is promising because of its excellent properties, including simple structure, high speed and high density integration. Many research groups have reported a lot of metal oxides as resistive materials like TiO2, NiO, SrTiO3 and ZnO [1]. Among them, the ZnO-based film is one of the most promising materials for RRAM because of its good switching characteristics, reliability and high transparency [2]. However, in many studies about ZnO-based RRAMs, there was a problem to get lower current level for reducing the operating power dissipation and improving the device reliability such an endurance and an retention time of memory devices. Thus in this paper, we investigated that highly reproducible bipolar resistive switching characteristics of W doped ZnO RRAM device and it showed low resistive switching current level and large ON/OFF ratio. This may be caused by the interdiffusion of the W atoms in the ZnO film, whch serves as dopants, and leakage current would rise resulting in the lowering of current level [3]. In this work, a ZnO film and W doped ZnO film were fabricated on a Si substrate using RF magnetron sputtering from ZnO and W targets at room temperature with Ar gas ambient, and compared their current levels. Compared with the conventional ZnO-based RRAM, the W doped ZnO ReRAM device shows the reduction of reset current from ~$10^{-6}$ A to ~$10^{-9}$ A and large ON/OFF ratio of ~$10^3$ along with self-rectifying characteristic as shown in Fig. 1. In addition, we observed good endurance of $10^3$ times and retention time of $10^4$ s in the W doped ZnO ReRAM device. With this advantageous characteristics, W doped ZnO thin film device is a promising candidates for CMOS compatible and high-density RRAM devices.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2009.08a
• /
• pp.210-210
• /
• 2009

• Proceedings of the Korean Vacuum Society Conference
• /
• 2009.02a
• /
• pp.131.2-131.2
• /
• 2009

• Proceedings of the KIEE Conference
• /
• 1999.07d
• /
• pp.1953-1955
• /
• 1999

The effects of the local lifetime control on the characteristics of IGBT are investigated using the 2-dimensional device simulator, MEDICI. Many lumped resistive turn-off simulations are carried out to analyze the effects of the minority carrier lifetime, the width, and the position of the region with a reduced local minority carrier lifetime. As a result of these simulations, it is concluded that the on state voltage drop$(V_{CE,SAT})$ is only slightly increased while the switching behavior is greatly improved if the low lifetime region is properly set. And these results are compared with IGBTs having uniform lifetime.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2002.05b
• /
• pp.141-144
• /
• 2002

We present current limiting properties of 1.2kV/70A superconducting fault current limiter based on YBCO thin films. This is consisted of 6 wafers (3 parallel ${\times}$ 2 serial connection) with 4 inch-diameter YBCO thin film. The quench current Iq of the switching elements vary between 33.9 and 35.6 A. Within the difference of 0.5 A in the sum of quench current Iq in two stacks, the serial connection of the stacks showed the simultaneous quench behavior in applied power of 1.2 kV /70 A.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2011.05a
• /
• pp.29.1-29.1
• /
• 2011

ReRAM은 metal-oxide-metal구조로 차세대 비활성 메모리를 대체하기 위하여 연구되어왔다. ReRAM은 낮은 전력 소모와 다른 두 저항상태 사이의 높은 scalability를 갖는 장점이 있지만 높은 reset전류와 일정하지 않은 저항 값을 갖고 있어 실용화에 어려움을 겪고 있다. 저항변화현상의 메커니즘은 일반적으로 일정 전압이 가해 졌을 때, MIM 구조의 산화물 내에서 필라멘트가 형성되었다 파괴되는 것으로 알려져 있다. 저항스위칭 메모리의 작동능력을 증진시키기 위해서는, oxide층의 두께조절, 산화층과 electrode 사이의 계면 특성 연구가 필요하다. 본 연구에서는, 전기화학증착법을 이용하여 Au-NiO-Au segmented 나노와이어 구조를 만들었다. 전기화학증착 방법을 이용하면 에칭 손상없이 간단하게 나노 구조체를 형성 할 수 있고, 나노 사이즈로 제작된 산화층이 전도성 필라멘트가 형성되는 영역을 제한하여 reset전류를 줄일 수 있는 장점이 있다. 또한 열처리 과정에서 Au가 NiO부분에 diffusion되는 현상을 이용하여 doping에 따른 switching 변화 특성도 관찰하였다.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.307-307
• /
• 2014

정보화 시대로 접어들면서 동일한 공간에 더 많은 정보를 저장할 수 있고, 보다 빠른 동작이 가능한 비휘발성 메모리 소자에 대한 요구가 증가하고 있다. 하지만, 최근 비휘발성 메모리 소자 관련 연구보고에 따르면, 메모리 소자의 소형화 및 직접화 측면에서, 전하 저장을 기반으로 하는 기존의 Floating-Gate(FG) Flash 메모리는 20 nm 이하 공정에서 한계가 예측 되고 있다. 따라서, 이러한 FG Flash 메모리의 한계를 해결하기 위해, 기존에 FET 기반의 FG Flash 구조와 같은 3 terminal이 아닌, Diode와 같은 2 terminal로 동작이 가능한 ReRAM, PRAM, STT-MRAM, PoRAM 등 저항변화를 기반으로 하는 다양한 종류의 차세대 메모리 소자가 연구되고 있다. 그 중, 저항 변화 메모리(ReRAM)는 CMOS 공정 호환성, 3D 직접도, 낮은 소비전력과 빠른 동작 속도 등의 우수한 동작 특성을 가져 차세대 비휘발성 메모리로 주목을 받고 있다. 또한, 상하부 전극의 2 terminal 만으로 소자 구동이 가능하기 때문에 Passive Crossbar-Array(CBA)로 적용하여 플래시 메모리를 대체할 수 있는 유력한 차세대 메모리 소자이다. 하지만, 이를 현실화하기 위해서는 Passive CBA 구조에서 발생할 수 있는 Read Disturb 현상, 즉 Word-Line과 Bit-Line을 통해 선택된 소자를 제외하고 주변의 다른 소자를 통해 흐르는 Sneak Leakage Current(SLC)를 차단하여 소자의 메모리 State를 정확히 sensing하기 위한 연구가 선행 되어야 한다. 따라서, 현재 이러한 이슈를 해결하기 위해서, 많은 연구 그룹에서 Diodes, Threshold Switches와 같은 ReRAM에 Selector 소자를 추가하는 방법, 또는 Self-Rectifying 특성 및 CRS 특성을 보이는 ReRAM 구조를 제안 하여 SLC를 차단하고자 하는 연구가 시도 되고 있지만, 아직까지 기초연구 단계로서 아이디어에 대한 가능성 정도만 보고되고 있는 현실 이다. 이에 본 논문은 Passive CBA구조에서 발생하는 SLC를 해결하기 위한 새로운 아이디어로써, 본 연구 그룹에서 선행 연구로 확보된 안정적인 저항변화 물질인 SiN를 정류 특성을 가지는 n-Si/Ti 기반의 Schottky Diode와 결합함으로써 기존의 CBA 메모리의 Read 동작에서 발생하는 SLC를 차단 할 수 있는 1SD-1R 구조의 메모리 구조를 제작 하였으며, 본 연구 결과 기존에 문제가 되었던 SLC를 차단 할 수 있었다.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.396-396
• /
• 2013

The resistive random access memory (ReRAM) has several advantages to apply next generation non-volatile memory device, because of fast switching time, long retentions, and large memory windows. The high mobility of monolayered graphene showed several possibilities for scale down and electrical property enhancement of memory device. In this study, the monolayered graphene grown by chemical vapor deposition was transferred to $SiO_2$ (100 nm)/Si substrate and glass by using PMMA coating method. For formation of metal-oxide nanoparticles, we used a chemical reaction between metal films and polyamic acid layer. The 50-nm thick BPDA-PDA polyamic acid layer was coated on the graphene layer. Through soft baking at $125^{\circ}C$ or 30 min, solvent in polyimide layer was removed. Then, 5-nm-thick indium layer was deposited by using thermal evaporator at room temperature. And then, the second polyimide layer was coated on the indium thin film. After remove solvent and open bottom graphene layer, the samples were annealed at $400^{\circ}C$ or 1 hr by using furnace in $N_2$ ambient. The average diameter and density of nanoparticle were depending on annealing temperature and times. During annealing process, the metal and oxygen ions combined to create $In_2O_3$ nanoparticle in the polyimide layer. The electrical properties of $In_2O_3$ nanoparticle ReRAM such as current-voltage curve, operation speed and retention discussed for applictions of transparent and flexible hybrid ReRAM device.

• Korean Journal of Materials Research
• /
• v.25 no.9
• /
• pp.429-434
• /
• 2015

Resistance switching memory cells were fabricated using atomically dispersed Pt-$SiO_2$ thin film prepared via RF co-sputtering. The memory cell can switch between a low-resistance-state and a high-resistance-state reversibly and reproducibly through applying alternate voltage polarities. Percolated conducting paths are the origin of the low-resistance-state, while trapping electrons in the negative U-center in the Pt-$SiO_2$ interface cause the high-resistance-state. Intermediate resistance-states are obtained through controlling the compliance current, which can be applied to multi-level operation for high memory density. It is found that the resistance value is related to the capacitance of the memory cell: a 265-fold increase in resistance induces a 2.68-fold increase in capacitance. The exponential growth model of the conducting paths can explain the quantitative relationship of resistance-capacitance. The model states that the conducting path generated in the early stage requires a larger area than that generated in the last stage, which results in a larger decrease in the capacitance.

• Proceedings of the KIEE Conference
• /
• 2002.07a
• /
• pp.336-338
• /
• 2002

We improved quench properties of a superconducting fault current limiter (SFCL) based on YBCO thin films by their serial and parallel combinations. The SFCL consisted of 6 switching elements fabricated of 4 inch-diameter YBCO thin films. Simple serial connection resulted in imbalanced power dissipation between switching elements even at the quench current difference of 0.6A. On the other hand, $2{\times}2\;and\;3{\times}2$ stack combinations produced simultaneous quenches. The $3{\times}2$ stack combination showed better simultaneous quench behavior than the $2{\times}2$ stacks. This is suggested to be because the currents between switching elements in parallel connection of the $3{\times}2$ stacks were more effectively redistributed than the $2{\times}2$ stacks.