• 전기전자학회논문지
• /
• 제19권4호
• /
• pp.479-485
• /
• 2015

A resistance deviation-to-time interval converter based on dual-slope integration using second generation current conveyors (CCIIs) is designed for connecting resistive bridge sensors with a digital system. It consists of a differential integrator using CCIIs, a voltage comparator, and a digital control logic for controlling four analog switches. Experimental results exhibit that a conversion sensitivity amounts to $15.56{\mu}s/{\Omega}$ over the resistance deviation range of $0-200{\Omega}$ and its linearity error is less than ${\pm}0.02%$. Its temperature stability is less than $220ppm/^{\circ}C$ in the temperature range of $-25-85^{\circ}C$. Power dissipation of the converter is 60.2 mW.

• 전기전자학회논문지
• /
• 제23권2호
• /
• pp.636-641
• /
• 2019

저항형 센서 브리지들을 인터페이싱 하기 위한 간단한 저항 편차-시간 주기 변환기를 제안한다. 제안된 변환기는 두 개의 2세대 전류 컨베이어(current conveyor II: CCII)로 구성된다. 제안된 변환기는 연산 증폭기 또는 연산 트랜스컨덕턴스 증폭기(OTA)로 구성되는 기존의 변환기들보다 회로 구성이 간단하다는 장점을 가진다. 제안된 변환기를 AD844로 구현한 CCII를 이용하여 PSPICE 시뮬레이션을 진행하였다. 실험 결과는, 변환기가 $100{\sim}500{\Omega}$의 저항 편차 범위에 걸쳐서 $0.01934ms/{\Omega}$의 변환 감도를 가지며 선형 오차는 ${\pm}0.002%$ 이내라는 것을 보여준다.

• 전기학회논문지P
• /
• 제59권4호
• /
• pp.372-376
• /
• 2010

Electrolytic capacitors have been widely used in power electronics system because of the features of large capacitance, small size, high-voltage, and low-cost. Electrolytic capacitors, which is most of the time affected by aging effect, plays a very important role for the power electronics system quality and reliability. Therefore it is important to estimate the parameter of an electrolytic capacitor to predict the failure. The estimation of the equivalent series resistance(ESR) is important parameter in life condition monitoring of electrolytic capacitor. This paper proposes a simple technique to measure the ESR of an electrolytic capacitor. This method uses a switching DC/DC boost converter to measure the DC Bus capacitor ESR of power converter. Main advantage of the proposed method is very simple in technique, consumes very little time and requires only simple instruments. Simulation results are shown to verify the performance of the proposed method.

• 전력전자학회논문지
• /
• 제16권5호
• /
• pp.511-520
• /
• 2011

현재 스마트 그리드 산업으로 인하여 신재생에너지의 활용이 중시되고 있다. 이러한 시점에서 신재생에너지원을 더욱 효율적이고 안정적으로 사용하기 위해서 에너지 저장장치의 필요성이 부각되고 있다. 이러한 경우 신재생 에너지원을 계통에 사용할 수 있도록 만들어 주는 부스트 컨버터와 에너지 저장장치의 에너지 전달을 위한충 방전기를 사용하게 된다. 이 두 가지 전력변환장치의 사용을 위해, 상호 간섭에 의해 각각의 제어기 설계에 어떠한 영향을 미치는지 알아야 한다. 우선 각각의 제어기 설계를 위해 시뮬레이션을 통한 간접적인 결과를 얻어내야 하는데, 이 때 인덕터를 이상적으로 생각하고 시뮬레이션을 할 수도 있고, 실제 하드웨어와 같이 인덕터에 기생하는 저항을 포함하여 시뮬레이션 할 수도 있다. 본 논문에서는 부스트 컨버터의 인덕터 기생저항이 부스트 컨버터와 충 방전기의 제어기 설계시 어떠한 영향을 미치는 지에 대해 비교해 봄으로써 시뮬레이션시 인덕터 기생저항 성분을 반드시 고려하여 설계해야 한다는 것을 주파수 영역에서의 MATLAB 시뮬레이션과 시간영역에서의 PSIM 시뮬레이션을 통해 살펴보았다.

• 전기학회논문지P
• /
• 제63권4호
• /
• pp.345-350
• /
• 2014

DC electrolytic capacitor is widely used in the power converter including PWM inverter, switching power supply and PFC Boost converter system because of its large capacitance, small size and low cost. In this paper, basic characteristics of DC electrolytic capacitor vs. frequency is presented and the real-time estimation scheme of ESR and capacitance based on the bandpass filtering is adopted to the single phase boost converter of uninterruptible power supply to diagnose its split dc-link capacitors. The feasibility of this real-time failure prediction monitoring system is verified by the computer simulation of the 5[kW] singe phase PFC half-bridge boost converter.

• 조명전기설비학회논문지
• /
• 제28권12호
• /
• pp.116-123
• /
• 2014

In case of power electronics, th power loss and EMI noise of IGBT is different depends on a adopting technology with the same power rating. To reduce the EMI noise, we could increase the resistance of gate. But in this case, the power loss of IGBT is increased, In this paper, we simulated the power loss of IGBT with the speed profile of elevator by the changing IGBT type, the voltage between gate and emitter, the resistance of gate in converter and inverter for elevator. To optimize the power electronics with the satisfied life time, It is necessary that we calculate the power loss and the rise of temperature in IGBT with the adopting technology type, the resistence of gate, the voltage between gate and emitter.

• Journal of Power Electronics
• /
• 제16권3호
• /
• pp.1046-1055
• /
• 2016

A controller to mitigate the destabilizing effect of constant power load (CPL) is proposed for a DC/DC buck-boost converter. The load profile has been considered to be predominantly of CPL type. The negative incremental resistance of the CPL tends to destabilize the feeder system, which may be an input filter or another DC/DC converter. The proposed sliding mode controller aims to ensure system stability under the dominance of CPL. The effectiveness of the controller has been validated through real-time simulation studies and experiments under various operating conditions. The controller has been demonstrated to be robust with respect to variations in supply voltage and load and capable of mitigating instabilities induced by CPL. Furthermore, the controller has been validated using all possible load profiles, which may arise in modern-day DC-distributed power systems.

• 전기학회논문지P
• /
• 제59권1호
• /
• pp.40-46
• /
• 2010

DC link electrolytic capacitors are widely used in various PWM power converter system, such as adjustable speed driver(ASD) or DC/DC converter. Electrolytic capacitors, which is the most of the time affected by aging effect, plays a very important role for the power electronics system quality and reliability. This objective of this paper is to propose a improvement method to detect the rise of equivalent series resistor(ESR) in order to realize the online failure prediction of electrolytic capacitor for DC link of PWM power converter. The ESR detection scheme is based on the determination of the electrolytic capacitor AC losses calculated from voltage/current measurement using AC coupling. Therefore, the preposed online failure prediction method has the merits of easy ESR computation and circuit simplicity compare with BPF method. Simulation results show the veridity of the proposed on-line ESR estimation method.

• 전기학회논문지P
• /
• 제58권2호
• /
• pp.207-213
• /
• 2009

Electrolytic capacitors have been widely used in power electronics system because of the features of large capacitance, small size, high-voltage, and low-cost. Electrolytic capacitors, which is most of the time affected by aging effect, plays a very important role for the power electronics system quality and reliability. Therefore it is important to estimate the parameter of an electrolytic capacitor to predict the failure. This paper proposed a novel fault diagnosis method of an electrolytic capacitor used for voltage smoothing in boost DC converter. The equivalent series resistance(ESR) of electrolytic capacitor estimated from FFT result of filtered waveform of capacitor voltage/current. Main advantage of the proposed method include circuit simplicity and easy implementation. Simulation and experimental results are shown to verify the performance of the proposed method.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2001년도 춘계종합학술대회
• /
• pp.431-436
• /
• 2001

정류기의 부하를 등가 저항으로 대치하여 고역률로 운전하기 위하여 DC/DC 컨버터를 AC/DC 정류기에 부가하여 전류 연속 모드(CCM)와 전류 불연속 모드(DCM)의 경계에서 동작하는 부스트 정류기를 설계한다. 또한 필터 캐패시터(C$_{i}$)를 부가하여 고역률 운전이 가능하도록 듀티비를 제어한다. 이를 검증하기 위하여 100[W]급 부스트 정류기를 제작하고 실험을 통해 그 결과를 비교 검토한다.