• 제목/요약/키워드: resistance management

검색결과 994건 처리시간 0.024초

볼트풀림에 의한 터미널 블록의 접속부 발열 위험성 분석 (Analysis of the Risk of Heat Generation due to Bolt Loosening in Terminal Block Connector Parts)

  • 연영모;김승희
    • 한국화재소방학회논문지
    • /
    • 제34권3호
    • /
    • pp.67-75
    • /
    • 2020
  • 본 연구는 산업현장에서 사용되는 분전반 내 터미널 블록의 탄화 사고를 예방하기 위한 목적으로, 전선 접속부 볼트의 이상(Abnormal) 풀림 각도에 따라 변화하는 정상전류 및 과전류의 접속부 발열 위험성을 확인하고 열적 특성을 통해 위험성을 분석하였다. 이를 위하여 터미널 블록에 Resistance temperature detector (RTD) 센서 보드를 설치하여 실시간으로 터미널 블록의 발열 온도와 온도의 변화를 측정하는 새로운 기법을 적용하였다. 실험 결과 정격 전류가 작은 터미널 블록 모델의 발열 온도가 높게 나타남에 따라 부하전류에 따른 터미널 블록 용량 선정의 중요성을 확인하였다. 또한 정격전류가 높은 터미널 블록의 정격 전류가 높을수록, 이상 풀림 정도가 클수록 탄화점이 빨라짐을 확인하였다. 이러한 발열 온도 모니터링을 통해서 실시간 발열 온도를 측정할 수 있었고 열적 분석을 통해서 단계별 위험수위 설정이 가능함을 확인할 수 있었다. 본 연구의 탄화 위험성 측정 및 분석 결과는 탄화로 인한 화재 위험성에 대한 응용 연구의 이론적 기초를 제공할 수 있다. 또한 본 연구에서 새롭게 적용한 온도 센서 보드를 활용한 열화 측정 방법은 위험수준관리 및 전기적 접촉 불량으로 인한 화재 예방 활동에 광범위하게 적용 가능할 것으로 사료된다.

국내 수도용 제초제의 작용기작별 분류 (Classification According to Site of Action of Paddy Herbicides Registered in Korea)

  • 박재읍;김상수;김영림;김민주;하헌영;이인용;문병철;임양빈
    • Weed & Turfgrass Science
    • /
    • 제3권3호
    • /
    • pp.165-173
    • /
    • 2014
  • 국내에 등록된 제초제의 효율적 사용을 위해서 제초제저항성관리위원회에서 제시한 제초제 작용기작별 분류를 기초로 23그룹으로 분류하였다. 세부그룹으로는 acetyl CoA carboxylase 억제제, acetolactate synthase 억제제, photosystem과 억제제, protoporphyrinogen oxidase 억제제, carotenoid biosynthesis 억제제, enolpyruvyl shikimate-3-phosphate synthase 억제제, glutamine synthetase 억제제, dihydropteroate synthetase 억제제, 세포분열 저해제(mitosis inhibitors), cellulose 생합성억제제, oxidative phosphorylation uncouplers, 지방산 및 지질생합성 억제제, synthetic auxins, auxin transport 억제제, potential nucleic acid Inhibitors 혹은 non-descript mode of action으로 나누었다. 이와 같은 그룹화 기준을 토대로 국내 등록되어 사용중인 논 제초제 성분들을 그룹화 하였다. 따라서, 이러한 약제 작용기작 관련 정보를 농약사용자에게 제공함으로써 특정약제의 연용과 중복사용을 방지하여 국내에서 제초제 저항성잡초 발생 문제를 줄일 수 있을 것으로 기대된다.

소형 가스엔진 열병합발전 시스템의 안전관리 방안에 관한 연구 (A Study on the Safety Management Methods of Micro-Gas Engine Combined Heat and Power System)

  • 김소현;김민우;이은경;이정운
    • 한국가스학회지
    • /
    • 제22권6호
    • /
    • pp.76-89
    • /
    • 2018
  • 지속적인 산업 발전에 따른 에너지 수급의 불안정 및 환경오염 문제가 대두됨에 따라 이에 대한 해결 방안의 일환으로 열병합발전 시스템의 보급이 활발해지고 있다. 국내의 경우 가스엔진을 이용한 열병합발전기의 안전성능에 대한 검사기준이 미비하므로 이에 대한 연구가 필요한 실정이다. 본 연구에서는 20 kW급 가스엔진 열병합발전 시스템에 적용 가능한 안전성능 관련 표준화 연구 수행을 위해 열병합발전 시스템의 국내 외 기준에 대한 안전성능 및 구조/재료 평가기준을 분석하였다. 또한, 위험요소 분석 및 HAZOP (Hazard and Operability Studies)을 이용한 위험성평가를 수행하여 가스엔진 열병합발전 시스템의 안전성능 평가(안)을 도출하였으며, 평가항목으로는 안전성능 관련 엔진 시동, 배관 기밀 성능, 살수 및 온도 상승 성능, 연소 성능, 전기 효율, 열효율, 종합 효율, 습도 성능 등이 포함된다. 가스엔진 열병합발전 시스템의 구조 및 재료와 관련하여 가스 및 수배관, 가스 조절 및 차단밸브, 금속 또는 비금속 재료의 내구성, 내열성, 내한성에 대한 평가항목을 도출하였다.

동남아시아 재난에 적합한 도심형 홍수임시차수시스템 개발 (Development of Flood Rapid Defense System(FRDS) suitable for Southeast Asian Disaster)

  • 정인수;오은호
    • 한국산학기술학회논문지
    • /
    • 제19권11호
    • /
    • pp.8-17
    • /
    • 2018
  • 방콕(태국) 등 동남아시아 도시 홍수의 경우 열악한 배수시설로 포장된 도로를 따라 광대한 도심지역이 저수위 홍수에 침수되고 있다. 모래가 부족한 도심지의 경우 모래주머니 등 기존 침수방지 방법은 유효하지 않으므로 인공적인 침수방어 구조물을 설치할 필요가 있다. 이와 관련하여 유럽 및 북미 일부 선진국을 중심으로 개발된 침수 월류방어장비들은 고가에 복잡한 시공성을 가지고 있어 동남아시아 지역에 저변을 확대하기 어려운 상황이다. 따라서 저가 및 단순 고기능형 도심형 홍수임시차수시스템(FRDS)을 개발할 필요가 있다. 이에 본 연구에서는 FRDS의 개요 고찰, 국내외 개발 동향 분석, 개발 니즈 및 방향 제시 등을 통해 동남아시아에 적용할 수 있는 FRDS를 개발하였다. 개발한 시스템은 한국건설생활시험연구원 서산 옥외실증시험센터에서 누수율변형 시험 및 내충격성 시험에 관한 KS 성능평가를 실시하였으며, KS F 2639(누수율 변형 시험)과 KS F2236(내충격성 시험) 기준을 통과하였다. 본 연구결과는 홍수재난과 관련하여 동남아국가 도시홍수에 적용할 뿐만 아니라, 국내 홍수빈발지역 및 주요시설 등에 활용할 수 있을 것으로 판단되며, 도시홍수와 관련하여 주요지자체 및 시설물 관리기관의 과학적 능동적 대응을 유도할 수 있을 것이다.

금속 보강재와 채움재 특성에 따른 보강토교대의 인발거동 분석 연구 (Pullout Behavior of Mechanically Stabilized Earth Wall Abutment by Steel Reinforcement and Backfill Properties)

  • 김태수;이수양;남문석;한희수
    • 한국산학기술학회논문지
    • /
    • 제19권11호
    • /
    • pp.750-757
    • /
    • 2018
  • 보강토교대는 보강토옹벽을 교대로 활용하는 토류구조물로써, 보강토체의 변형을 억제하기 위해, 마찰성능이 우수한 채움재와 비신장성 금속 보강재를 사용하고 있다. 본 연구에서는 보강토교대에 주로 사용되는 비신장성 금속 보강재에 대한 인발거동을 분석하기 위하여, 보강토교대 채움재의 강성 및 입도분포와 보강재의 간격에 따른 인발거동을 검토하였다. 매개분석을 통한 분석결과, 보강토체의 인발력은 최상단 보강재에 가장 크게 작용하였고, 보강토교대의 채움재의 특성과 보강재의 수평간격도 보강토의 인발저항에 큰 영향을 미치는 것으로 나타났다. 채움재의 내부마찰각은 최소 25도 이상, 균등계수는 4 이상의 사질토 그리고 최상단 보강재의 수평간격은 25cm 이하로 배치해야만 설계기준에 제시된 최소 인발 안전율을 만족하였다. 따라서, 보강토체의 인발저항성능을 확보하기 위해서는 채움재의 특성을 면밀하게 고려하여 설계를 수행하여야 하며, 채움재의 특성뿐만 아니라 하중조건을 고려하여 보강재의 배치도 적절하게 하여야 할 것이다. 시공시에는 설계시 고려한 채움재의 강성과 입도분포에 대한 철저한 품질 및 시공 관리가 필요할 것이다.

아르곤 상압플라즈마를 이용한 CNT 코팅 공정 기술 개발 (Development of CNT Coating Process using Argon Atmospheric Plasma)

  • 김경보;이종필;김무진
    • 산업융합연구
    • /
    • 제20권10호
    • /
    • pp.33-38
    • /
    • 2022
  • 본 논문에서는 용액 기반의 탄소나노튜브(CNT: Carbon Nano-tube)를 전자기기의 전도성 소재로 사용하기 위하여 쉽고 빠르게 형성하는 방법에 대해 연구하였다. 이를 위해 스핀 코팅 방법 및 아르곤 상압플라즈마 공정을 적용하여 글라스 위에 CNT 박막 코팅을 진행하였다. 코팅 횟수에 따른 전기적, 물리적 특성 변화를 관찰하기 위하여 1회부터 5회까지 동일한 방법으로 형성된 샘플을 제작하였고, 각 샘플에 대해 표면 형상, 반사도, 투과도, 흡수율 및 표면 저항을 측정하였다. 현미경을 이용하여 관찰했을 때 횟수가 늘어날 때 글라스 상에 검은 형상이 더 잘 관찰되며, 특히 스핀코팅에 의해 가운데 영역이 더 검게 관찰되는 것을 알 수 있다. 코팅 수가 증가함에 따라 측정 파장의 전 영역에서 투과도는 감소, 반사도 및 흡수율은 증가하였다. 또한, 파장이 감소함에 따라 투과율은 감소, 반사도 및 흡수율은 증가한다. 전기적인 특성의 경우, 2번 코팅했을 때 전도도가 상당히 향상됨을 확인할 수 있었으며, 추가 코팅에 의해서 전도도 감소가 관찰되지만, 큰 변화를 보이지는 않았다. 결론적으로 CNT를 투명전극으로 대체하기 위해서는 반사도 및 전기전도도를 함께 고려하여 코팅 횟수를 고려해야 하며, 2회가 최적임을 알 수 있다.

유연 전자소자용 금속 전극 제조를 위한 Ag Nanowire 용액의 Brush 코팅 및 플라즈마 공정을 이용한 어닐링 (Effects of Brush Coating of Ag Nanowire Solution and Annealing using Plasma Process for Flexible Electronic Devices)

  • 김경보
    • 산업융합연구
    • /
    • 제21권3호
    • /
    • pp.189-194
    • /
    • 2023
  • 최근에 유연 전자소자에 대한 다양한 연구가 이루어지고 있다. 본 연구에서 유연 전자소자용 금속기반의 투명 전도막으로 Ag 나노와이어로 그 가능성을 평가하였다. 이를 위해 신개념의 브러시 코팅법과 상압플라즈마 기반의 아르곤 플라즈마 증발법으로 Ag 나노 물질을 글라스에 형성시켰다. 먼저 브러시로 Ag 용액을 글라스에 코팅하고, 남아있는 용매는 상압플라즈마로 제거한다. 이 용매 증발 과정에서 상압플라즈마와 용매의 반응에 의해 소리가 발생하기 때문에 용매의 남아있는 정도를 확인할 수 있다. 막의 코팅 횟수에 따른 반사도, 투과도, 흡수도와 같은 광특성 및 전기적인 결과들을 관찰하기 위하여 최대 5번 코팅하여 그 결과들을 분석하였다. 광에 의한 Ag 나노와이어와의 상호작용을 조사할 목적으로 빛의 파장을 200nm부터 800nm까지 변화시키면서 반사도 및 투과도를 측정하였으며, 반사도와 투과도 모두 5번 코팅한 샘플에서 가장 큰 변화를 나타내었다. 특히 흡수도의 경우 반사도나 투과도의 데이터와는 다르게 코팅에 따라 Ag 나노와이어의 빛에 대한 흡수도 증가 추이를 명확하게 확인할 수 있었다. 전기적인 특성은 4번 이상 코팅했을 때부터 큰 변화가 있었으며, 특히 5번 진행시 kΩ/cm2보다 낮아진 저항값을 보였다. 이러한 광 및 전기적인 결과들을 기반으로, 향후 전자소자에 적용하여 투명 전도막으로의 가능성을 검증할 계획이다.

사과 주 재배지 경북 청송 지역 사과 탄저병원균의 살균제에 대한 감수성 조사 (Research to Fungicide Sensitivity of Colletotrichum spp. Isolated from Apple Fruits in Cheongsong, Korea)

  • 김중연;김흥태;전용호
    • 식물병연구
    • /
    • 제29권2호
    • /
    • pp.145-157
    • /
    • 2023
  • 2018년, 경상북도 청송군 소재 7개의 읍면리의 13개 사과과원에서 채집한 탄저병 감염 과실로부터 39개 탄저병 균주를 분리한 후 이 균주들을 대상으로 국내에 등록된 12개의 사과 탄저병 살균제에 대한 균자생장 억제, 포자발아 억제율을 조사하여 각각의 살균제에 대한 감수성 정도를 한천희석법을 이용한 실내검정법으로 조사하였다. 살균제 감수성 실내검정 결과 captan, dithanon, fluazinam, metconazole, tebuconazole에서는 저항성 균주가 나타나지 않았으나, trifloxystrobin, kresoxim-methyl 살균제에서는 모든 지역에서 저항성을 보이는 균주가 관찰되었다. 이를 통해 일부 지역에서 살균제의 지속적인 처리로 인하여 균주 집단 내 살균제 내성이 발현되었음을 알 수 있었다. 저항성이 발현된 strobilurin 계통의 살균제를 관리하기 위하여 연용 살포를 하지 말아야 하며, 살포기간에 유용미생물로 인한 대체 살포 등 관리가 필요하다.

토양입자분포 프랙탈차원을 활용한 논토양 쟁기바닥층 물이동 추정 (Water Transport Characteristics of Paddy Plow Pan Soils as Estimated by Particle Size Distribution Fractal Dimension)

  • 한경화;조현준;허승오;하상건;조희래;전상호
    • 한국토양비료학회지
    • /
    • 제43권1호
    • /
    • pp.1-7
    • /
    • 2010
  • 본 연구는 논토양 쟁기바닥층을 대상으로 특성을 파악하고 토양입자분포를 프랙탈차원화하여 물이동을 추정하고자 수행하였다. 모내기전 비담수기에 보통논과 사질논 12지점을 각각 선정하였다. 선정지점에서 깊이별 관입경도를 측정하여 쟁기바닥층 출현깊이와 두께를 도출하였다. 표토와 쟁기바닥층에서 토양입자분포, 유기물함량, 산중식 경도를, 쟁기바닥층에서 2인치 코아시료를 채취한 후 변수위법으로 포화수리전도도를 측정하였다. 토양입자분포의 프랙탈 차원화는 측정한 입자분포자료, 0-0.002, 0.002-0.053, 0.053-0.1, 0.1-0.25, 0.25-0.5, 0.5-1.0, 1.0-2.0 mm의 함량을 활용하여 Tyler와 Wheatcraft (1992)의 방법을 따랐다. 조사한 연구지점의 쟁기바닥층 출현깊이는 5-30 cm, 두께는 5-17 cm로 분포하였으며 보통논이 사질논보다 평균적으로 출현깊이가 깊고 두께는 얇은 것으로 나타났다. 또한 보통논은 점토함량이 18%이상으로 상대적으로 세립질 토성을, 사질논은 18%이하로 조립질 토성을 나타내었다. 토양입자분포의 프랙탈차원 ($D_m$)은 세립질 토성일수록 높은 값을 나타내었으며 조립질토양에서 더 높은 프랙탈성을 나타내었다. 포화수리전도도는 0.5-1420 mm $day^{-1}$로 분포하였으며 사력질 사질논에서 가장 높은 값을 나타내었다. 포화수리전도도는 점토함량과 $D_m$이 증가함에 따라 감소하는 경향이 나타났으며 멱함수의 형태를 나타내었다. 점토함량보다 $D_m$을 독립변수로 사용했을시, 적합된 멱함수의 결정계수가 높았으며 특히 사질논이 보통논보다 결정계수가 높게 나타났다. 따라서 본 연구는 토양입자분포를 프랙탈 차원화를 통해 단일 값으로 표현하여 포화수리전도도 등의 물이동 특성 추정에 활용할 수 있다고 보여준다 할 수 있다. 특히 조립질 토성을 가진 논토양의 물이동 추정에 유용할 것으로 판단할 수 있었다.

참여자관점에서 공급사슬관리 시스템의 성공에 영향을 미치는 요인에 관한 실증연구 (An Empirical Study on the Determinants of Supply Chain Management Systems Success from Vendor's Perspective)

  • 강성배;문태수;정윤
    • Asia pacific journal of information systems
    • /
    • 제20권3호
    • /
    • pp.139-166
    • /
    • 2010
  • The supply chain management (SCM) systems have emerged as strong managerial tools for manufacturing firms in enhancing competitive strength. Despite of large investments in the SCM systems, many companies are not fully realizing the promised benefits from the systems. A review of literature on adoption, implementation and success factor of IOS (inter-organization systems), EDI (electronic data interchange) systems, shows that this issue has been examined from multiple theoretic perspectives. And many researchers have attempted to identify the factors which influence the success of system implementation. However, the existing studies have two drawbacks in revealing the determinants of systems implementation success. First, previous researches raise questions as to the appropriateness of research subjects selected. Most SCM systems are operating in the form of private industrial networks, where the participants of the systems consist of two distinct groups: focus companies and vendors. The focus companies are the primary actors in developing and operating the systems, while vendors are passive participants which are connected to the system in order to supply raw materials and parts to the focus companies. Under the circumstance, there are three ways in selecting the research subjects; focus companies only, vendors only, or two parties grouped together. It is hard to find researches that use the focus companies exclusively as the subjects probably due to the insufficient sample size for statistic analysis. Most researches have been conducted using the data collected from both groups. We argue that the SCM success factors cannot be correctly indentified in this case. The focus companies and the vendors are in different positions in many areas regarding the system implementation: firm size, managerial resources, bargaining power, organizational maturity, and etc. There are no obvious reasons to believe that the success factors of the two groups are identical. Grouping the two groups also raises questions on measuring the system success. The benefits from utilizing the systems may not be commonly distributed to the two groups. One group's benefits might be realized at the expenses of the other group considering the situation where vendors participating in SCM systems are under continuous pressures from the focus companies with respect to prices, quality, and delivery time. Therefore, by combining the system outcomes of both groups we cannot measure the system benefits obtained by each group correctly. Second, the measures of system success adopted in the previous researches have shortcoming in measuring the SCM success. User satisfaction, system utilization, and user attitudes toward the systems are most commonly used success measures in the existing studies. These measures have been developed as proxy variables in the studies of decision support systems (DSS) where the contribution of the systems to the organization performance is very difficult to measure. Unlike the DSS, the SCM systems have more specific goals, such as cost saving, inventory reduction, quality improvement, rapid time, and higher customer service. We maintain that more specific measures can be developed instead of proxy variables in order to measure the system benefits correctly. The purpose of this study is to find the determinants of SCM systems success in the perspective of vendor companies. In developing the research model, we have focused on selecting the success factors appropriate for the vendors through reviewing past researches and on developing more accurate success measures. The variables can be classified into following: technological, organizational, and environmental factors on the basis of TOE (Technology-Organization-Environment) framework. The model consists of three independent variables (competition intensity, top management support, and information system maturity), one mediating variable (collaboration), one moderating variable (government support), and a dependent variable (system success). The systems success measures have been developed to reflect the operational benefits of the SCM systems; improvement in planning and analysis capabilities, faster throughput, cost reduction, task integration, and improved product and customer service. The model has been validated using the survey data collected from 122 vendors participating in the SCM systems in Korea. To test for mediation, one should estimate the hierarchical regression analysis on the collaboration. And moderating effect analysis should estimate the moderated multiple regression, examines the effect of the government support. The result shows that information system maturity and top management support are the most important determinants of SCM system success. Supply chain technologies that standardize data formats and enhance information sharing may be adopted by supply chain leader organization because of the influence of focal company in the private industrial networks in order to streamline transactions and improve inter-organization communication. Specially, the need to develop and sustain an information system maturity will provide the focus and purpose to successfully overcome information system obstacles and resistance to innovation diffusion within the supply chain network organization. The support of top management will help focus efforts toward the realization of inter-organizational benefits and lend credibility to functional managers responsible for its implementation. The active involvement, vision, and direction of high level executives provide the impetus needed to sustain the implementation of SCM. The quality of collaboration relationships also is positively related to outcome variable. Collaboration variable is found to have a mediation effect between on influencing factors and implementation success. Higher levels of inter-organizational collaboration behaviors such as shared planning and flexibility in coordinating activities were found to be strongly linked to the vendors trust in the supply chain network. Government support moderates the effect of the IS maturity, competitive intensity, top management support on collaboration and implementation success of SCM. In general, the vendor companies face substantially greater risks in SCM implementation than the larger companies do because of severe constraints on financial and human resources and limited education on SCM systems. Besides resources, Vendors generally lack computer experience and do not have sufficient internal SCM expertise. For these reasons, government supports may establish requirements for firms doing business with the government or provide incentives to adopt, implementation SCM or practices. Government support provides significant improvements in implementation success of SCM when IS maturity, competitive intensity, top management support and collaboration are low. The environmental characteristic of competition intensity has no direct effect on vendor perspective of SCM system success. But, vendors facing above average competition intensity will have a greater need for changing technology. This suggests that companies trying to implement SCM systems should set up compatible supply chain networks and a high-quality collaboration relationship for implementation and performance.