• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.5
• /
• pp.394-405
• /
• 2019

The purpose of this study is to clarify the concept of the frail elderly and to obtain theoretical evidence. The research method was conducted using the basic principles for conceptual analysis of Walker and Avant(2005). As a Result of a review of the literature about how to utilize the concept of a frail elderly, frail elderly might be in the intermediate state of health and disease. They can be defined as physically vulnerable in the sarcopenia, inflammation, insulin resistance, and preceding advanced disease, lead to hospitalization, falls, disability, and death. The attributes were physiological, psychological, and socio-environmental and economic factors, so they had multidimensional factors. They were required the assist daily living of another person. Also, their attributes had decreased the amount of recovery time and degree, and exhaustion. The attributes of frail elderly consisted of these facts: dynamic process, multidimensional factors, dependency, vulnerability. The frail elderly was a dynamic process that involves the possibility of change to health and disease, and include physical, mental, cognitive, and social environmental factors. In addition, the frail elderly was difficulty in daily life, physical vulnerability and difficulty in adaption. In conclusion, frail elderly as defined by the results of this study will contribute to the foundation of health care systems, including community visiting nursing to understand the level of frail elderly and systemic management to do not go into long term care.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.21 no.1
• /
• pp.1-29
• /
• 2019

Related to the previous paper on the typical crack pattern of tunnel lining with NATM, the characteristic defects in reinforced cement concrete lining of NATM tunnel have analyzed with the precise inspection with safety and diagnosis (PISD) by KISTEC. Depending on the reinforcing materials, steel rebar, steel fiber, and glass fiber have been implemented to reinforcing lining in various NATM tunnel constructions. Reinforcing lining with rebar are prevailed on NATM tunnel to countermeasure the weak geological circumstances, to pursuit the economical tunnel sections, and to resist the risk of tunnel deterioration. By the special act on the safety control of public facilities, the reinforced NATM tunnels for more than 1 km length are scrutinized closely to characterize defects; crack, reinforcement exposure, and lack of lining. Crack resistance by reinforcing is shown in comparison with the normalized crack to the length of tunnel. Typical exposed reinforcements in lining have exemplified with various sections. The lack of lining due to the mal-construction, spalling, fire, earthquake and leaching has been analyzed. The cause and mechanism with the field inspections and other studies has also been verified. Detailed cases are selected by the above concerns as well as the basic information from FMS (Facilities Management System). Likewise the previous paper, this study provides specialized defects in reinforced lining of NATM and it can be widely used in spreading the essential technics and reporting skills. Furthermore, it would be advised and amended for the detail guideline of Safety Diagnosis and PISD (tunnel).

• Industry Promotion Research
• /
• v.4 no.1
• /
• pp.29-43
• /
• 2019

This study is to discusses the relevance of social welfare in Freud's psychoanalytic theory. The results of the study are as follows. First, psychoanalytic theory details the client's family history and personal history to help them identify the characteristics of the problem they have today. At this time, social workers actively listen to clients and try to get various information.Second, when used in psychoanalytic techniques, the resistance of the client can be interpreted and analyzed to help the client maintain friendly relationships with the client.Third, psychoanalytic theory can properly apply the client's current state of mind by understanding the potential conflicts or emotions that exist in the client's unconscious mind. Fourth, during the process of intervention, social workers need to deal well with the client's transition response. This process allows social workers to observe the effect of reducing the stimuli that can cause nervousness in clients.In conclusion, all the techniques of interpretation used in psychoanalytic theory are, after all, techniques that help social workers improve clients' insight into their problems and help clients solve their psychological problems themselves. The psychoanalytic theory is widely applied in social welfare.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.29 no.2
• /
• pp.71-76
• /
• 2019

Recently, the demand of labels for product management is increasing, as the automation system becomes more common. the development of functional labels which can be used in various environments has been rapidly proceeded. In the case of a printed circuit board, barcode labels with thermal and chemical stability are generally used due to a high temperature process around $300^{\circ}C$ and chemical cleaning in the manufacturing process. However, the yellowing phenomenon of labels that can lower the resolution of printed barcode image still needs to be prevented. In this study, we prepared a composite coating layer using a silica inorganic binder and a titanium dioxide white pigment, and developed a functional labels with thermal and chemical stability. The silica inorganic binder prepared by sol-gel process was confirmed to show excellent adhesion and abrasion resistance with the polyimide film. The white coating layer could be formed on the polyimide film with mixing the silica inorganic binder and titanium dioxide white pigment. The prepared coating layer showed excellent whiteness and glossiness above $400^{\circ}C$. The excellent chemical stability of the coating layer was also confirmed by the chemical treatment with acidic (pH 1.6) and basic (pH 13.6) cleaners.

• Korean Journal of Labor Studies
• /
• v.19 no.1
• /
• pp.105-137
• /
• 2013

This paper proposes to examine the relationship between the two trade unions of Hyundai Motor Company (HMC) - those of the regular workers and of the in-house subcontract workers - around the issue of converting irregular workers to regular ones, which has been a social issue for a long time, and, furthermore, to find a desirable solution. The politics of the in-house subcontracting rotate around three axes: the conflictive collusion between the company and the regular workers'union regarding the internal labor market; the exclusion and resistance between the company and the subcontract workers'union; and the solidaristic conflict relationship between the two unions. After the final decree by the supreme court in 2012 the conflict and collusion/solidarity relationship of the three social actors have been amplified in scale - the continuous limping of the special bargaining between the company and the unions, the intensified conflict between the company and the subcontract workers'union, and the crisis of the collusion between the branches of the two unions are all evidence of this. A clue to the solution to the issues of in-house subcontracting in HMC can be found through reestablishment of the relationship among the three actors. In order to solve the in-house subcontracting issues in HMC, phased and lawful switching from irregular to regular positions, improvement of working conditions for the irregular workers, integration of the two unions (realization of 'one company one union'), and negotiated flexibility in the internal labor market will be required. Also to be considered are installation of a special committee for the issue, and utilization of external consultants. The result would be the possibility for the corporate labor market of HMC to be composed of regular workers, legal contract workers and directly-employed contract workers, which could be realized through bilateral relations of 'the labor and management conflict partnership'.

• Korean Journal of Environmental Biology
• /
• v.38 no.4
• /
• pp.603-610
• /
• 2020

The problem of increased resistance to pesticides is caused by the management of Bemisia tabaci, which depends almost entirely on pesticides, and to solve this problem, we investigated the host preference of B. tabaci among herbal plants to develop a possible attractant for alternative control methods. Experiments were conducted in greenhouse tomatoes at the National Institute of Horticultural Science and Herbal Science in Wanju-gun. Major herbal plants such as lemon balm, chocolate mint, rose geranium, and apple geranium were installed 50cm from the ground and 30cm from the top of the tomatoes, then the density of B. tabaci was investigated. As a result of examining the density of B. tabaci by the location of the herbal plants, it was found that the lemon balm location showed the highest B. tabaci density while rose geranium and apple geranium were rather avoided. These results are expected to be helpful in the development of alternative B. tabaci control methods using herbal plants including attractants, repellents, and trap plants.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.42 no.6
• /
• pp.751-762
• /
• 2022

Welded head studs are mainly used as shear connectors to bond steel girders and concrete slabs in steel-concrete composite bridges. For welded shear connectors, environmental problems include noise and scattering dust which are generated during the removal of damaged or aged slabs. Therefore, it is necessary to develop demountable shear connectors that can easily replace aged concrete slabs for efficient maintenance and thus for better management of environmental problems and life cycle costs. The buried nut method is commonly studied in relation to bolted shear connectors, but this method is not used in civil structures such as bridges due to low rigidity, low shear resistance, and increased initial slip. In this study, in order to mitigate these problems, a demountable bolted shear connector is proposed in which the buried nut is integrated into the stud column and has a tapered shape at the bottom of an enlarged column shank. To verify the performance of the proposed demountable stud bolts in terms of static shear strength and slip displacement, a horizontal shear test was conducted, with the performance outcomes compared to those of conventional welded studs. It was confirmed that the proposed demountable bolted shear connector is capable of excellent shear performance and that it satisfies the slip displacement and ductility design criteria, meaning that it is feasible as a replacement for existing welding studs.

• Journal of the Korean Geotechnical Society
• /
• v.38 no.5
• /
• pp.5-17
• /
• 2022

A pile is a type of medium for constructing superstructures in weak geotechnical conditions. A pretensioned spun high-strength concrete (PHC) pile is composed of high-strength concrete with a specified strength greater than 80 MPa. Therefore, it has advantages in resistance to axial and bending moments and quality control and management since it is manufactured in a factory. However, the skin friction of a pile, which accounts for a large portion of the pile bearing capacity, is only approximated using empirical equations or standard penetration test (SPT) N-values. Particularly, there are some poor research results on the pile-soil interface under the seismic loads in Korea. Additionally, some studies do not consider geoenvironmental elements, such as groundwater pH values. This study performs sets of cyclic simple shear tests using submerged concrete specimens for 1 month to consider pH values of groundwater and clay specimens composed of kaolinite to generate a pile-soil interface. 0.2 and 0.4 MPa of normal stress conditions are considered in the case of pH values. The disturbed state concept is employed to express the dynamic behavior of the interface, and the disturbed function parameters are newly suggested. Consequently, the largest disturbance increase under basic conditions is observed, and an early approach to the failure under low normal stress conditions is presented. The disturbance function parameters are also suggested to express this disposition quantitatively.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.28 no.2
• /
• pp.270-279
• /
• 2022

In this paper, system dynamics considering dynamics and time was examined to study the changes in system structure according to reinforcement (policy intervention) of regulation and punishment for fishing boats, and the strategizing directions were analyzed. Until now, regulations and punishments on fishing boats have been conducted temporarily and short-term as a precautionary measure to prevent accidents and imposed penalties. However, due to various anomalous side effects, the expected results were not achieved, negligent accidents occurred constantly, and follow-up measures were repeated. Resultantly, the regulation and punishment of fishing boats is a reinforced safety standard, and there is a necessity to improve facilities, equipment, and industry, and develop technology (including time delay) to prevent accidents. However, as the negative (illegal) activities continue without immediate and significant resistance, the safety blind spot for accident prevention cannot be minimized. Thus, policy intervention based on linear thinking without sufficiently considering variables of the dynamic mechanism and time can distort the basic values pursued by the policy. For the regulation and punishment of fishing boats, a strategy to supplement the mechanism should be prepared prior to the preparation of reinforced safety standards. Improvement and development of related technologies, mandatory training hours for anglers, fishing industry, and related organizations, proposal of specific action plan for Fishing Management and Promotion Act for growing fishing-related industries.

• Journal of Korean Society of Forest Science
• /
• v.112 no.3
• /
• pp.382-392
• /
• 2023

Recent reports have indicated a rapid increase in the frequency of sediment disasters due to climate change and other changes in the geological environment. Given this alarming situation and the recent increase in the frequency of land creep in Korea, systematic and efficient recovery and management of land creep areas is essential. The purpose of this study is to identify disaster vulnerability by conducting a physical exploration of land creep in San 4-1, Jayeon-ri, Gaegun-myeon, Yangpyeong-gun, Gyeonggi-do, and examine stability by identifying the overall geological structure of the affected ground. In addition, drilling surveys are conducted to verify the reliability of the measured data. The results of the study reveal that low specific resistance abnormalities are distributed in the upper part of the soil layer and weathering zone and that this section is a 50-120 m exploration line. It is also confirmed to be a low-hardness ground area where tensile cracks are observed. Therefore, there is a need for research focused on developing measures to reduce economic and social damage within the domestic context by continuously monitoring indicators of land creep and identifying land creep risks.