• Journal of Korean Society for Quality Management
• /
• v.42 no.3
• /
• pp.387-406
• /
• 2014

Purpose: The widespread use of social network services (SNS) has caused users concern about the disclosure of their privacy or personal information. The purpose of this study is to analyze the factors of privacy concern and self presentation that affect the user resistance in the use of social network service. Methods: This study verifies the factors that affecting the user resistance in SNS. The research model suggested in this study is tested via a survey of 260 SNS users. SPSS and Smart PLS had been used to test the suggested hypotheses. Results: This study shows that privacy experience, privacy awareness, self esteem, and social desirability significantly influence perceived risk and that privacy awareness, self esteem, self efficacy, and perceived risk significantly influence perceived trust. It also verifies that perceived risk and perceived trust positively affect user resistance. Conclusion: This paper suggests that high awareness on privacy of SNS user encourages the SNS companies to consider the privacy protection mechanism for eliminating various factors that affecting the risk. This study also shows that the privacy calculus model applies to understanding the mechanism on resistance of SNS user.

• Journal of the Korea Safety Management & Science
• /
• v.19 no.4
• /
• pp.301-307
• /
• 2017

The planing hull is characterized by a large change in the posture according to the speed, and the shape of the propeller varies, so that the hull resistance varies greatly depending on the propeller used. Especially, the Savitsky system, which is widely used for estimating the resistance of planing hull, does not consider the characteristics of these propeller and ship bottom spray rails. In this paper, in order to investigate the difference in resistance characteristics between the propeller and the bottom of the propeller of 6m and 12m class propeller using propeller such as outboard or stern drive, A comparative test was conducted on resistance and attitude posture changes in the Circulating Water Channel of Institute of Medium & Small Shipbuilding. As a result of comparison test, it was confirmed that there is a clear difference in the attitude change due to the presence of the bottom floor spray rail and the change in resistance characteristics due to the installation of the propeller. However, attitude change with the propeller was found to be insignificant.

• Knowledge Management Research
• /
• v.20 no.2
• /
• pp.59-86
• /
• 2019

As the era of the 4th Industrial Revolution evolves, not only private companies but also government agencies and institutions in public sector are adopting cloud computing services converged by new information technologies such as IoT, big data, and artificial intelligence to strengthen competitiveness and create new business values. The purpose of this study is to investigate the relationship between innovation characteristics, innovation resistance, and acceptance of innovative technologies from the perspective of cloud computing services in the public sector. In this study, we collected the survey data from 190 employees of IT division in the public sector, and analyzed the causal relationship between innovation characteristics, technostress, innovation resistance, and intention to adopt the cloud computing service that they perceived. As a result of the analysis, we demonstrated that innovation characteristics, technostress have significant effect on innovation resistance and acceptance intention, and that top executive commitment and innovation resistance also have significant effect on acceptance intention. This study provides meaningful practical implications for the staffs preparing for adoption of cloud computing services and the executives who make the final decision in public sector.

• The Journal of Information Systems
• /
• v.17 no.2
• /
• pp.73-94
• /
• 2008

Knowledge is a fundamental assets, therefore, the ability to create, acquire, integrate, and share knowledge has emerged as a fundamental organizational capability(Sambamurthy and Subramani, 2005). This apaper reports the results of an empirical study investigating the factors of acceptance and the moderating role of resistance in Knowledge Management Systems(KMS). The research model is based on the theory of planned behavior(TPB) and technology acceptance model(TAM). It includes the perceived usefulness instead of attitude, subjective norm, perceived behavior control and intention of acceptance of KMS. Also, three external variables namely task-technology fit, organizational support, and perceived rewards are added. In the research model, all hypothrses of the baseline model and the moderating effects of resistance were found to be significant. The authors also of fred several implications based chi the findings.

• Journal of the Korea Safety Management & Science
• /
• v.5 no.1
• /
• pp.129-141
• /
• 2003

In this thesis, using the 400 series ferrite stainless steel such as 434LD$_2$ which are furter excellent then the existing ferric products in mechanical characteristics, and experiment has been conducted on corrosion resistance of sensor ring. The results are following. 1. The products before sintering are much more corrodible in the condition of spray test of salt water and ammonia than humidity and nitrogen condition. 2. 434LD$_2$ ferrite stainless steel has shown a good corrosion resistance without an addition surface treatment. thus the decreasing production process has been obtained. 3. As hardness value of $H_{RB}$ 80 and tensile test, 434LD$_2$ ferrite stainless steel with show a good endurance when it is combined to constant velocity joint (c/v joint), and has a good hardness properties endurable to sand and pebble impact.

• Tunnel and Underground Space
• /
• v.30 no.1
• /
• pp.63-75
• /
• 2020

When tunnel is excavated via drilling and blasting, the excessive overbreak is the primary cause of personal or equipment safety hazards and increasing the cost of the tunnel operation owing to additional ground supports such as shotcrete. The practical management of overbreak is extremely difficult due to the complex causative mechanism of it. The study examines the relationship between rock mass characteristics (unsupported face condition, uniaxial compressive strength, face weathering and alteration, discontinuities- frequency, condition and angle between discontinuities and tunnel contour) and the depth of overbreak through using feed-forward artificial neuron networks. Then, Overbreak Resistance Factor (ORF) has been developed based on the weights of rock mass parameters to the overbreak phenomenon. Also, a new concept of tunnel overbreak management system using ORF has been suggested.

• Research in Plant Disease
• /
• v.26 no.1
• /
• pp.1-7
• /
• 2020

The succinate dehydrogenase inhibitor (SDHI) is a class of fungicides, which is widely and rapidly used to manage fungal pathogens in the agriculture field. Currently, fungicide resistance to SDHIs has been developed in many different plant pathogenic fungi, causing diseases on crops, fruits, vegetables, and turf. Understanding the molecular mechanisms of fungicide resistance is important for effective prevention and resistance management strategies. Two different mechanisms have currently been known in SDHI resistance. The SDHI target genes, SdhB, SdhC, and SdhD, mutation(s) confer resistance to SDHIs. In addition, overexpression of ABC transporters is involved in reduced sensitivity to SDHI fungicides. In this review, the current status of SDHI resistance mechanisms in phytopathogenic fungi is discussed.

• Information Systems Review
• /
• v.10 no.3
• /
• pp.257-287
• /
• 2008

Grounded in the prior literatures on acceptance and diffusion of IT and innovation in the level of organization research, 3 major constructional factors such as Motivation, IT resistance, and IT change management were investigated to suggest propositions from 15 multi-cases of PLM from 6 different companies in Automotive OEMs and suppliers, and we posited that the diffusion is continued only when motivation is stronger enough to overcome IT resistance as a fundamental finding and basis of this research on PLM acceptance and diffusion. The Motivation was found to be initiated and categorized from three different factors such as environmental factors, organizational factors, and technological factors, providing key propositions for further research: (1)The Automotive suppliers, contrary to OEM, are affected more by the demand of inter-connectivity as an environmental factor, while the other factors are similarly influencing to them, (2)The big organizations are influenced more by the champion, while the small organizations get influenced more by leader. (3)When the trend, inter-connectivity and complexity get stronger, the motivation gets more strongly influenced by the perceived benefit in the technological context. Regarding Change management we suggests IT change management is supportive to overcome IT resistance and also to enforce Motivation, and the critical mass exists differently according to the market maturity adopted, and more market matured technology has lower critical mass, implies less requirement of IT change management than less market matured technology.

• Information Systems Review
• /
• v.6 no.2
• /
• pp.25-45
• /
• 2004

As information systems are implemented in business organizations, users and other stakeholders are known to resist changes incurred by information systems being implemented. For successful implementation, it is critical to manage changes overcoming resistance. Through literature review and expert panel, this study derives four underlying dimensions of resistance (anxiety, suspicion, imposition and self-centeredness) and five categories of change management activities (vision, leadership, communications, education and training, and organizational culture). A Survey was designed to measure the relationship between these dimensions and activities, and administered among information systems consultants. It is found that activities related to vision and leadership is underpinning other change management activities. Anxiety and imposition can be mitigated by education and training while suspicion is to be overcome by communications and self-centeredness by activities related to cultural changes. Implications are discussed and further researches are suggested.

• Journal of Digital Convergence
• /
• v.19 no.7
• /
• pp.129-138
• /
• 2021

Many organizations are applying robotic process automation (RPA) to automate repetitive and rule based tasks to enhance the accuracy and efficiency of works. Some members are willing to join the projects hoping to eliminate annoying and meaningless tasks, but others are resisting this innovation fearing that they may lose their jobs. In this study, both positive and negative antecedents are posited to influence the performance in adopting RPA. The effects of relative advantage, compatibility, change management effect, innovation resistance and satisfaction, conclusively to performance improvement were examined via a survey of 109 employees involved in the 11 RPA projects in a manufacturing company, and the structural equation model analysis. The research considering the consumer characteristics of the innovation resistance model can be followed for the development of individualized change management strategy.