• 한국결정성장학회지
• /
• 제15권4호
• /
• pp.168-174
• /
• 2005

건조공정 중인 다공성 물질의 물성은 재료의 비균질성 즉 전위, 입자, 입계, 균열, 기공과 같은 미시적인 결함 인자들의 영향을 받는다. 따라서 다공성 물질의 건조공정을 전산 시뮬레이션하기 위해서는 연속체 스케일과 원자 스케일해석 그리고 스케일별 해석 한계 극복이 요구된다. 본 연구에서는 분자동역학 시뮬레이션으로 계산한 나노스케일 물성를 연속체 스케일 해석에 연계하는 계층적 멀티스케일 시스템을 구축하고, 다공성 세라믹 애자의 건조공정을 전산 시뮬레이션 하였다. 해석 결과, 온도, 습도, 변형률 그리고 응력 분포를 기존의 결과들과 비교하여 검증하였다.

• 공업화학
• /
• 제1권2호
• /
• pp.161-167
• /
• 1990

Methylphenyldichlorosilane을 중합시켜 poly(methylphenyl)silane(PMPS)을 합성하고 이를 photoresist로 이용하는데 있어서 화상형상특성을 설명하기 위하여 노광에 의한 광학계수 X, Y, Z를 측정하였다. 광학계수 X, Y, Z는 PMPS 필름에 광조사를 시킨 다음 투과도를 측정하여 구하였으며, 계수 Z는 광조사 시간에 따른 투과도의 초기 기울기로 부터 구하였다. 이들 계수로 부터 PMPS에 각종 증감제를 첨가하여 제조한 필름에 광조사를 시켜 광조사특성을 이론적으로 구하고 이를 잔막수득율을 측정한 결과 Z치와 잔막수득율은 parallel한 관계가 있었다.

• 한국재난정보학회 논문집
• /
• 제10권1호
• /
• pp.123-140
• /
• 2014

회전쉘의 정적문제 및 동적문제에 대해서 선점법에 의한 공간영역의 이산화에 대한 유효성을 비교 검토하였고, 정식화에 있어서 이산화 후의 연립방정식 및 시간에 관한 연립상미분방정식의 계수행렬에 대한 영향을 검토하였다. 수치해석법에는 동적특성의 문제를 간단하고 효과적인 방법을 위하여 선점법을 제안하였으며, 수치해석예로서 평균2승잔차법과의 비교검토로 고정도의 해석을 위한 정확성을 검증하였다.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제12권8호
• /
• pp.3683-3703
• /
• 2018

Wireless sensor networks (WSNs) consist of set of sensor nodes. These sensor nodes are deployed in unattended area which are able to sense, process and transmit data to the base station (BS). One of the primary issues of WSN is energy efficiency. In many existing clustering approaches, initial centroids of cluster heads (CHs) are chosen randomly and they form unbalanced clusters, results more energy consumption. In this paper, an energy efficient clustering protocol to prevent unbalanced clusters based on firefly and midpoint algorithms called EEC-FM has been proposed, where midpoint algorithm is used for initial centroid of CHs selection and firefly is used for cluster formation. Using residual energy and Euclidean distance as the parameters for appropriate cluster formation of the proposed approach produces balanced clusters to eventually balance the load of CHs and improve the network lifetime. Simulation result shows that the proposed method outperforms LEACH-B, BPK-means, Park's approach, Mk-means, and EECPK-means with respect to balancing of clusters, energy efficiency and network lifetime parameters. Simulation result also demonstrate that the proposed approach, EEC-FM protocol is 45% better than LEACH-B, 17.8% better than BPK-means protocol, 12.5% better than Park's approach, 9.1% better than Mk-means, and 5.8% better than EECPK-means protocol with respect to the parameter half energy consumption (HEC).

• 한국공간구조학회논문집
• /
• 제10권3호
• /
• pp.57-64
• /
• 2010

본 논문에서는 세 종류의 ETFE 막재에 대한 단축인장실험을 수행하였다. 이 실험에서 얻은 변형도-변위 곡선을 분석함으로써 항복응력, 두 번째 항복응력, 탄성계수, 두 번째 탄성계수, 그리고 세 번째 탄성계수를 얻게 되었다. 아울러, 탄성 단계와 항복 단계, 소성유동 단계에서 각각 ETFE 막재의 사이클 하중시험을 진행하여, 잔여변형률, 응력 이완, 하중 변화(재하/제하) 중 ETFE 막재의 탄성 변화 등을 알아본다. 재료의 크리프시험에서는 25, 40, 60$^{\circ}C$의 시험온도와 3, 6, 9MPa의 인장 응력 하에서 크리프시험의 시간은 24시간으로 설정하였다.

• 한국전문물리치료학회지
• /
• 제17권3호
• /
• pp.59-67
• /
• 2010

Mortality rates from stroke have been declining. Because of this, more people are living with residual disability. Rehabilitation plays an important role in functional recovery of stroke survivors. In stroke rehabilitation, early prediction of the obtainable level of functional recovery is desirable to deliver efficient care, set realistic goals, and provide appropriate discharge planning. The purpose of this study was to identify predictors of functional outcome after stroke using inpatient rehabilitation as measured by Functional Independence Measure (FIM) total scores. Correlation and stepwise multiple regression analyses were performed on data collected retrospectively from two-hundred thirty-five patients. More than moderate correlation was found between FIM total scores at the time of hospital admission and FIM total scores at the time of discharge from the hospital. Significant predictors of FIM at the time of discharge were FIM total scores at the time of hospital admission, age, and onset-admission interval. The equation was as follows: expected discharge FIM total score = $76.12+.62{\times}$(admission FIM total score)-$.38{\times}(age)-.15{\times}$(onset-admission interval). These findings suggest that FIM total scores at the time of hospital admission, age, and onset-admission interval are important determinants of functional outcome.

• Nuclear Engineering and Technology
• /
• 제47권3호
• /
• pp.253-259
• /
• 2015

The fast neutron reactor BOR-60 is one of the key experimental facilities worldwide to perform large-scale tests of fuel, absorbing, and structural materials for advanced reactors. The BOR-60 reactor was put into operation in December 1969, and by the end of 2014 it had been operating on power for ~265,000 hours. BOR-60 still demonstrates potential capabilities to extend the lifetime of sodium-cooled fast reactors. The BOR-60 lifetime should have expired at the end of 2014. Over the past few years, a great scope of work has been performed to justify the possibility of extending its lifetime. The work included inspection of the equipment conditions, calculations and experimental research on operating parameters and the conditions of nonremovable components, investigation of the structural material samples after their long-term operation under irradiation, etc. Based on the results of the work performed, the residual lifetime was evaluated and the reactor operator made a decision to extend the lifetime period of the BOR-60 reactor. After considering both a set of documents about the reactor conditions and the positive decision of independent experts, the Regulatory Authority of the Russian Federation extended the BOR-60 operating license up to 2020.

• 전기학회논문지
• /
• 제58권9호
• /
• pp.1802-1808
• /
• 2009

A fault detection observer with finite time convergence characteristics(FT_FDO) is proposed and applied to a fault detection isolation system for a dynamic control system. The FT_FDO is a kind of dual state-observer scheme that provides with the state estimates insensitive to a specified fault and the corresponding fault estimate. The state estimates are processed to get the residual that will be logically compared with other residuals to detect and isolate the fault of interest, and the fault estimate may be used for fault compensation. The FDIS employing the FT_FDOs can be considered to be a multiple observer schemes(MOS) in which FT_FDOs are parallelly driven to generate a set of residuals to be compared each other. Due to the finite time convergence characteristics of the FT_FDO, the predetermined detection delay can be considered in the design stage of FDIS so that any fault of interest can be detected and identified in that time. It evidently resolves a well known difficulty of threshold selection owing to the transient responses of the fault detection observers(FDO) employed in FDIS. An FDIS is constructed for instruments(2-sensor, 1-actuator) in an inverted pendulum control system, and simulations are performed to show the performance of the FDIS and fault tolerant control system.

• 한국자동차공학회논문집
• /
• 제14권5호
• /
• pp.25-31
• /
• 2006

Controlled Auto Ignition(CAI) combustion has great potential in achieving significant increase in engine efficiency, while simultaneously reducing exhaust emissions. The process itself involves the auto ignition and subsequent simultaneous combustion of a premixed charge. In this study, NVO(Negative Valve Overlap) system was applied to a CAI engine in order to use residual gas. The fuel was injected directly to the cylinder under the high temperature condition resulting from heating the intake port to initiate CAI combustion. This paper introduced the valve timing strategy and experimental set-up. From this study, the effect of engine speed and valve timing on CAI combustion and exhaust emissions was clarified. In addition, stratified charge method was used to extend CAI operating region.

• Journal of Power Electronics
• /
• 제15권4호
• /
• pp.1085-1092
• /
• 2015

In this paper, the expressions of the estimated information of a single-phase enhanced phase-locked loop (EPLL), when input signal contains harmonics and a DC offset while the fundamental component takes step changes, are derived. The theoretical analysis results indicate that in the estimated information, the n^th-order harmonics cause n+1^th-order periodic ripples, and the DC offset causes a periodic ripple at the fundamental frequency. Step changes of the amplitude, phase angle and frequency of the fundamental component cause a transient periodic ripple at twice the frequency. These periodic ripples deteriorate the performance of the EPLL. A hybrid filter based EPLL (HF-EPLL) is proposed to eliminate these periodic ripples. A delay signal cancellation filter is set at the input of the EPLL to cancel the DC offset and even-order harmonics. A sliding Goertzel transform-based filter is introduced into the amplitude estimation loop and frequency estimation loop to eliminate the periodic ripples caused by the residual input odd-order harmonics and step change of the input fundamental component. The parameter design rules of the two filters are discussed in detail. Experimental waveforms of both the conventional EPLL and the proposed HF-EPLL are given and compared with each other to verify the theoretical analysis and advantages of the proposed HF-EPLL.