• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• 2006.11a
• /
• pp.619-623
• /
• 2006

When it comes environmental preservation and economic development throughout all the industries, it is adopted to regulate carbon dioxide emissions in United Nations Framework Convention on Climate Change. And we must be responsible for promoting the eco-friendly and sustainable development because of a registration of the Kyoto protocol. Almost all the domestic buildings have many problems that not only waste the resources and architectural energy, but also are not enough to recycling of the waste. So m this study the environment-friendship is estimated through assuming carbon dioxide emissions. And after indicators are derived through surveying the residential satisfaction, it is carefully thought to develop the Smart Component that increase the length of life and the flexibility and improve the comfortable circumstance in buildings.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.11 no.3
• /
• pp.251-259
• /
• 2023

In this study, as a foundational research aimed at promoting the efficient recycling and environmentally friendly disposal of construction waste through the activation of a selective dismantling system, our primary objective was to analyze the economic feasibility of implementing selective dismantling. To achieve this, we conducted an assessment on a 5-story residential building with a construction area of 2,400 m² as a case study. When considering the additional cost of dismantling construction ① the reduction in waste disposal costs due to decreased mixed waste, ② and the potential revenue from recycling through the separation and sorting of waste materials, and ③ we were able to comprehensively confirm that there is an expected cost-saving effect totaling 34,727,000 KRW when compared to conventional demolition methods.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.14 no.1
• /
• pp.112-130
• /
• 2006

In order to improve the waste management system for the unit of small villages, we visited 14 counties nationwide and investigated the present conditions of the farming and fishing villages on waste management. First, we selected one concentrated residential type village and one separated residential type village. Then we investigated the quantities and the characteristics of the domestic wastes generated from the 2 sample villages that we chose early on. The concentration of 7 heavy metals in open burned residuals was analyzed. The results are as follows: (1) We distributed the 799 questionnaires to public servants (83 Gun, 716 Myon) and 337 questionnaires to residents. In accordance with a result of questionnaire on the Volume-Based Waste Fee System, the rate of participated questionnaire was 70.3% from public servants and 31.8% from residents. (2) From the survey on two chosen villages, the generation of municipal waste was 48.6g/person/day in A Village, 54.3g/person/day in B Village. This amount was smaller than that of national average of 1.05kg because of excluding recyclable wastes and some of incinerated combustible waste. (3) The 14 counties entered the aged society. There were 2 aging societies, 8 aged societies and 4 super-aged societies. And the average ratios of Public financial independence and waste budget of financial independence were 16.1% and 17.9% respectively. These are lower than that of national average of 57.2% and 31.4%. This indicates that these factors seemed to be operated with the hindrance insettling Volume-Based Waste Fee System in the small villages.

• Proceedings of the Korean Institute of Interior Design Conference
• /
• 2005.05a
• /
• pp.106-109
• /
• 2005

The awareness of ecological friendliness has been emerging in the recent years, and the application to housing is quite notable. The purpose of this study was to examine multi-family housing that has recently developed with the idea of ecological friendliness, and to investigate the residents' attitudes toward and their preferences for the features. The research utilized in-depth interviews and site visits, and seven residents in the studied housing developments participated in the study. The analytical tool used in the interview was reviewed by a panel of professionals and included five aspects of ecologically friendliness: residential comfort, energy saving, open housing, storage, and safety and security. The respondents pointed out that south-facing housing in relation to residential comfort was most favorable. With regard to energy-saving, water-saving features and dehydrator of food waste were most needed features. As for open housing-related features, flexibility in spatial configuration was necessary, and efficient storage was regarded as important. Also, the respondents mentioned the preference for flooring preventing slippery in bathroom for the safety of family member.

• Environmental Analysis Health and Toxicology
• /
• v.31
• /
• pp.6.1-6.10
• /
• 2016

Objectives This study examined the spatial distribution and the extent of soil contamination by heavy metals resulting from primitive, unconventional informal electronic waste recycling in the Agbogbloshie e-waste processing site (AEPS) in Ghana. Methods A total of 132 samples were collected at 100 m intervals, with a handheld global position system used in taking the location data of the soil sample points. Observing all procedural and quality assurance measures, the samples were analyzed for barium (Ba), cadmium (Cd), cobalt (Co), chromium (Cr), copper (Cu), mercury (Hg), nickel (Ni), lead (Pb), and zinc (Zn), using X-ray fluorescence. Using environmental risk indices of contamination factor and degree of contamination ($C_{deg}$), we analyzed the individual contribution of each heavy metal contamination and the overall $C_{deg}$. We further used geostatistical techniques of spatial autocorrelation and variability to examine spatial distribution and extent of heavy metal contamination. Results Results from soil analysis showed that heavy metal concentrations were significantly higher than the Canadian Environmental Protection Agency and Dutch environmental standards. In an increasing order, Pb>Cd>Hg>Cu>Zn>Cr>Co>Ba>Ni contributed significantly to the overall $C_{deg}$. Contamination was highest in the main working areas of burning and dismantling sites, indicating the influence of recycling activities. Geostatistical analysis also revealed that heavy metal contamination spreads beyond the main working areas to residential, recreational, farming, and commercial areas. Conclusions Our results show that the studied heavy metals are ubiquitous within AEPS and the significantly high concentration of these metals reflect the contamination factor and $C_{deg}$, indicating soil contamination in AEPS with the nine heavy metals studied.

• 한국태양에너지학회:학술대회논문집
• /
• 2011.04a
• /
• pp.204-209
• /
• 2011

According to the environment report of UN, korea was classified as potable water shortage countries. Approximately 71% of the Earth's surface is covered by ocean. However, it is difficult to use for industry of residential purpose without a certain processing. The development of solar and waste-heat used absorption desalination technology have been examined as a viable option for supplying clean energy. In this study, the modelling of the main devices for solar and waste-heat used and adsorption desalination system was introduced. The design is divided into three parts. First, the evaporator for the vaporization of the top water is designed, and then the reactor for the adsorption and release of the steam is designed, followed by the condenser for the condensation of the fresh water is designed. In addition, new features based on the energy balance are also included to design absorption desalination system. In this basicresearch, One-bed(reactor) adsorption desalination plant that employ a low-temperature solar and waste energy was proposed and experimentally studied. The specific water yield is measured experimentally with respect to the time controlling parameters such as heat source temperatures, coolant temperatures, system switching and half-cycle operational times.

• Plant Journal
• /
• v.10 no.3
• /
• pp.45-51
• /
• 2014

This study performs several experiments on a newly developed temperature safety system that can be used for residential building heating systems, the heat source of which is derived from a conventional fuel cell. Prior to this, the hot water made from a fuel cell was not used in residential housing but just went to waste. The present safety system is installed in the current underfloor heating system. At first we used the CFD technique to develop a new heat exchanger. The fuel cell must satisfy the thermal conditions of the inlet temperature being $55^{\circ}C$ and the outlet temperature being $60^{\circ}C$. But variations in weather cause fluctuations in the heating water temperature. The experimental results show our new system capable of maintaining the temperature difference within a ${\pm}0.5^{\circ}C$ range. So we believe that our new PFMFC fuel cell stack array is a good candidate for being used in residential heating systems.

• Journal of Korean Society of Environmental Engineers
• /
• v.38 no.4
• /
• pp.155-161
• /
• 2016

This research is to explore resident's assessment of the Automated Vacuum Waste Collection System (AVWCS), which is devised to attain sustainability of residential environment. A number of AVWCS has been installed in Gyeonggi Province, so 283 households in 11 new public housing estates of 5 cities participated in a self-administered questionnaire survey. The data collected from 133 respondents in for-sale housing estates and 150 participants in rental housing estates, and the primary findings were as follows: a vast majority of both owners and renters had neither been aware of nor used the system before moving to their current housing estate. Also, most of the respondents learned how to use the AVWCS from on-site housing management staff, and the learning among renters was greatly delayed. Renters were in stronger favor of the system than owners, and their satisfaction was greater than the counterpart. Although few items were unsatisfactory, many emphasized that AVWCS should be augmented with user-centered, environmentally friendly features, and also they viewed that the system would substantially contribute to sustainable urban environment.

• Journal of Korean Society of Environmental Engineers
• /
• v.38 no.2
• /
• pp.56-62
• /
• 2016

The purpose of this research is to explore both on-site manager's and resident's assessment of the Automated Vacuum Waste Collection System (AVWCS) in suburban apartment complexes. In doing so, a self-administered questionnaire survey was conducted in 10 districts and their 11 apartment complexes in the Seoul Metropolitan Area. The main findings can be summarized as follows: the managers considered the AVWCS to be economically efficient and environmentally fiendly, and suggested that the system be managed in a more professional way, with an advanced technology and by more qualified technicians. The recommendation was related to residents' complaints and frequent mechanical failures frequently occurring in waste inlets and waste transport piping of the system. For residents using the system, the system was satisfactory, and should be necessarily improved with more user-friendly features. Further, most comments made by the residents were relevant to waste inlets such as safety, cleanliness, prompt repair, odor reduction, waste separation. It's of significant to train residents with how to properly use the system, which is expected to substantially fall a number of residents' complaints. Therefore, both professional management of AVWCS and regular workshops on how to utilize it are crucial in order to heighten its strengths.

• Journal of the Korean Wood Science and Technology
• /
• v.22 no.4
• /
• pp.19-25
• /
• 1994

The purpose of this study was to determine the technical feasibility of making 3-dimensional thin hardboard panels for overlay substitutes of low grade particleboard and plywood panels. Experimental studies were directed at assembling bench-top apparatus, learning the characteristics of different types of lignocellulosic waste papers, for making thin hardboard with several combinations of them with and without resin addition. The raw materials used are waste corrugated cartons, cereal boxes, and old magazines which contain substantial amount of lignin in it. The experimental results showed that satisfactory thin(0.21~0.16cm) hardboard could be made from the residential mixed waste papers that have selected properties comparable to commercial 0.32cm hardboard. The significant mixing ratio effect of the waste papers was present on the thickness swelling, water absorption, linear expansion, and modulus of elasticity including Taber abrasion tests of the thin hardboard made. The mixing ratio of waste papers and resin in the thin hardboard prominently affected the specific gravity of it, which led to affect modulus of elasticity and those physical properties sensitively. And it was shown that the hardboard containing those physical properties can be used for overlay substitutes of low grade plywood and particleboard panels.