• 대한전자공학회논문지SD
• /
• 제47권1호
• /
• pp.38-45
• /
• 2010

초점면 배열 원적외선 검출기를 위한 새로운 신호취득 회로를 연구하였다. 각 픽셀 감지소자에 흐르는 전류에 따라, 각 픽셀 회로의 적분시간이 능동적으로 최적화될 수 있도록 리셋 신호를 조정하는 방식이다. 따라서, 제안하는 신호취득 회로는 넓은 동작 범위와 뛰어난 신호 대 잡음 비 특성을 동시에 가질 수 있다. 회로 제작에 사용한 공정은 $0.35{\mu}m$ 2-poly 4-metal CMOS 공정이다. 원적외선 감지소자로서 HgCdTe 다이오드를 사용했고, 배열의 크기는 $128{\times}128$이며, 단위 픽셀의 크기는 $50{\mu}m{\times}50{\mu}m$이다. 기존에 제안한 이 단계 암전류 억제 방식과 더불어 본 논문에서 제안하는 리셋 조정 회로를 함께 사용할 경우, 신호 대 잡음 비와 동작 범위를 각각 87dB와 95.8dB 까지 향상시킬 수 있다.

• 설비공학논문집
• /
• 제26권12호
• /
• pp.572-578
• /
• 2014

Heating energy was measured in an apartment housing unit with a district heating system, varying the kind of hot water distributors. Ondol coils passing through a living room raised the temperature of the room where the heating was turned off. Including this characteristic of Ondol heating into the modeling, we performed simulations and showed a verification by comparison with the results of measurements. As a result, a main flow control method, which changes hot water flow rate supplied to a housing unit according to the thermal load, can reduce the supplied flow rate and lower the return temperature, compared with a constant flow method. That can result in decreased heat loss in utility-pipe conduits even though the heating energy supplied is almost the same. An outdoor reset control that raises the temperature of the supplied hot water if the outdoor temperature falls has the effect of a quicker response in heating than the reduced flow rate and return temperature.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1989년도 한국자동제어학술회의논문집; Seoul, Korea; 27-28 Oct. 1989
• /
• pp.1091-1096
• /
• 1989

All mechanical systems have saturation nonlinearity in actuators or in final control elements. When controllers have integral action, reset windup can cause instability as well as make the system performance unsatisfactory. In this study, an intelligent limiter which needs no tuning of parameters is tested with the PDF controller used for control of a second order plant. This paper presents analysis of the stability of the system using the describing function method and the Nyquist stability theorem. The improvement of the system performance by the limiter is illustrated by computer simulations.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1990년도 한국자동제어학술회의논문집(국제학술편); KOEX, Seoul; 26-27 Oct. 1990
• /
• pp.1289-1294
• /
• 1990

When a saturating control system has integral action, reset windup can cause instability as well as make the system performance unsatisfactory. An antirset-windup (ARW) limiter has been suggested to improve the stability and performance. It has been implemented with analog circuits and tested by simulations. This paper presents the stability condition of a double-integrator plant having the state feedback plus integral-action controller with the ARW limiter by using both Liapunov's second method and graphical method together.

• 대한전기학회논문지
• /
• 제38권5호
• /
• pp.380-387
• /
• 1989

The Conventional-Anti-reset-Windup (CAW) structure gives pretty good performance among the conventional strategies that prevent systems from saturation, but there is no systematic way of designing the control systems. Also, it frequently destabilizes the systems. Moreover, the CAW structure cannot be applied when the output of the saturating actuator cannot be measured. Therefore the CAW structure is modified to accommodate this situation. An effective designing method is proposed to give better performance of the control system. The stability of the control system is also considered. The usefulness of the proposed method is shown by applying this method to a few examples.

• 한국정보통신학회논문지
• /
• 제19권11호
• /
• pp.2534-2539
• /
• 2015

발전기의 전압조정장치(AVR)를 이용하여 전압을 조절하는 방식은 기존 아날로그방식과 교체중인 디지털방식을 나눌 수 있다. 일반적으로 브러쉬레스형의 여자시스템을 이용하여 전압을 조절할 경우 전부하에 대하여 전압변동을 작게 하여야 한다. AVR의 제어방법으로 PID(비례-적분-미분)제어방식이 많이 사용되고 있다. 그러나 이 제어기법은 제어대상에 대하여 제어기의 파라미터를 조절하여 과도응답을 줄이고 있다. 따라서 제어대상이 달라질 경우 다시 제어기의 파라미터를 다시 설정해야하는 문제점이 있다. 본 연구에서는 제어대상의 파라미터 변동에 대하여 제어기의 파라미터를 재설정 필요없이 iPID(intelligent PID)제어기를 이용하여 발전기 AVR시스템에 적용하여 전부하 시에도 전압변동이 작은 응답을 얻도록 설계하고 시뮬레이션과 실험을 통하여 과도응답을 개선하였다.

• 한국경영과학회지
• /
• 제22권2호
• /
• pp.99-123
• /
• 1997

Performance analysis of NTT/BT protocol is investigated, which is a GFC (Generic Flow Control) ptotocol in ATM (Asynchronous Transfer Mode ) network and is based on cyclic reset mechanism. THe mean cell delay time is proposed as a performance measure of NTT/BT protocol. The mean cell delay time is defined as the duration from the instant the cell arrives at the transmission buffer until the cell is fully transmitted. The process of cell transmission can be described as a single server queueing modle with two dependent services. By utilizing this model, mean cell delay time is obtained and sensitivity of the factors such as window size and reset period is also analysed.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제7권2호
• /
• pp.94-97
• /
• 2007

The desin and implementation of a CMOS analog integrated circuit that provides dual-mode modulations, PWM for active clamp reset converter and PFM for LLC resonant converter, is described. The proposed controller is capable of implementing programmable soft start and current-mode control with compensating ramp for PWM and frequency shifting soft start for PFM. Also it provides delay time for both modes. PWM mode is implemented by active clamp reset converter and PFM mode is implemented by LLC resonant convereter, respectively. The chip is fabricated using the 0.6um high voltage CMOS process.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2003년도 추계종합학술대회
• /
• pp.745-748
• /
• 2003

본 논문에서는 각종 산업 현장의 라인에 긴급 정지 장치로 병설되는 풀 코드 스위치의 동작위치를 판별하는 시스템에 대하여 다룬다. 특히, 된 논문에서는 전력선 통신 기술을 사용하여 복잡한 케이블 포설 없이도 기존의 2선만을 사용하여 동작된 풀 코드 스위치의 위치를 인식하는 방법을 제시한다. 또한 전력선 통신 IC의 제어 기능을 사용하여 스위치 제어 인식장치에서 각 스위치를 리셋하는 신호를 전송할 수 있도록 구성한다. 끝으로, 논문에서는 제안된 전력선 방식의 풀 코드 스위치 동작위치 인식장치를 제작하고 전력선을 통하여 전달된 신호 및 반응시간 관찰함으로써 풀 코드 스위치의 위치인식 시스템으로 실제로 적용이 가능함을 확인하였다.

• Earthquakes and Structures
• /
• 제24권6호
• /
• pp.415-428
• /
• 2023

Low-cost techniques with seismic isolation performance and excellent resilience need to be explored in the case of rural low-rise buildings because of the limited buying power of rural residents. As an inexpensive and eco-friendly isolation bearing, scrap tire pads (STPs) have the issue of poor resilience. Thus, a seismic isolation system under a column (SISC) integrated with STP needs to be designed for the seismic protection of low-rise rural buildings. The SISC, which is based on a simple exterior design, maintains excellent seismic performance, while the mechanical behavior of the internal STP provides elastic resilience. The horizontal behaviors of the SISC are studied through load tests, and its mechanical properties and the intrinsic mechanism of the reset ability are discussed. Results indicate that the average residual displacement ratio was 24.59%, and the reset capability was enhanced. Comparative experimental and finite element analysis results also show that the load-displacement relationship of the SISC was essentially consistent. The dynamic characteristics of isolated and fixed-base buildings were compared by numerical assessment of the response control effects, and the SISC was found to have great seismic isolation performance. SISC can be used as a low-cost base isolation device for rural buildings in developing countries.