• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.26 no.3
• /
• pp.131-139
• /
• 2014

Infra-gravity waves (IGWs) with a period of 1~3 minutes are a factor that directly influences the motion analysis of moored ships inside a harbor and longshore sediment transport analysis. If significant levels of IGWs from far seas are transferred to a harbor and amplified, they may cause downtime of large ships and induce economic loss. In this study, transfer characteristics of the IGWs intruding from outside to inside Pohang New Harbor were analyzed using statistical analysis and transfer function of wave data measured at both outside and inside the harbor for around 5 years. Transfer characteristic analysis was limited to events where IGWs had wave heights above 0.1 m. The wave height distribution of inside the harbor was similar to that of outside the harbor, while the wave period variance of the former was larger than that of the latter. The parameters of the transfer function was optimally estimated according to each event. The estimated average RMS error of the wave height inside the harbor was around 0.013 m. The estimated parameters had a strong correlation with the linear combination information of IGW wave height, period, and direction (R = 0.95). The transfer function suggested in this study can quickly and easily estimate information on IGWs inside the harbor using IGW information predicted beforehand, and is expected to reduce damage due to unexpected restrictions on harbor usage.

• Proceedings of the Ginseng society Conference
• /
• 1998.06a
• /
• pp.160-167
• /
• 1998

Chemical studies of nitrogen compounds of Panax ginseng seem relatively rare, Probably due to the isolation difficulties, subsequently the investigations of biological activities are little. The experimental conditions were established for highly complete extraction of peptides (basic, acidic and neutral) from Panax ginseng. This task was achieved by applying the follow isolation procedure: 1 , the sequential extraction with water, 0.1% TFA in 20% acetonitril and buffer pH 6.5 (water-pyridine-acetic acid 100:3:900) : 2, fractionation by ultrafiltration : 3, n-butanol extraction 4, cation- and anion-exchange chromatography : 5, chromato-electrophoresis. The comparison of red ginseng (xylem Sl pith part) and red ginseng inside white (xylem Sc pith part) was also provided. To analyze the peptide mixture the chromato-electrophoresis method of separation was applied. Optimal conditions for peptides mapping of sample were explored. Our experiments revealed the quantitative difference of peptide between xylem & pith and phloem & cortex part. We have also found the qualitative difference in the composition of polypeptides between normal red ginseng (xylem Sc pith part) and red ginseng inside-white (xylem St pith part)

• Journal of the Korean Society of Costume
• /
• v.64 no.5
• /
• pp.141-153
• /
• 2014

Buddhist articles from various periods in the Vairochana Buddha statues, which are currently housed in the Haeinsa Temple's Supreme Buddha Hall and Beopbojeon Hall. This research concentrates on the artifacts found inside the storage boxes, which was placed inside the Buddha statues in 1490. A total of 24 pieces of fabric articles found inside the Virochana Buddha in Beopbojeon and 213 pieces from the Supreme Buddha Hall were examined. The types of textiles are as follows: bast fiber, silk, cotton, and union cloth. Bast fiber consisted of ramie and hemp. For silk, tabby woven with plain weave, spun silk, and thin tabby were found. And twill damask made with twill, Sa and Ra with the leno weave, and satin damask made with the satin weave were also found. Also the two Jeogoris and three Jogakbos were found, the one Jeogori was made with Hwan. The Buddhist articles in the Vairochana Buddha of Haeinsa have been preserved well and its colors have remained virtually the same from the time of its original placement. Therefore these articles are very important in understanding the textile characteristics, weaving techniques, dying techniques as well as traditional colors.

• 보존과학연구
• /
• s.23
• /
• pp.95-112
• /
• 2002

Seoul City built a facility for conservation of the Wongaksajisipcheungseoktap (Ten storied stone pagoda of Wongaksa Temple site, National treasure No. 2). It has speciality glass(thickness 21.5㎜) between steel-frames(8.4m, length 8.4m, height 15.4m). So we investigated the inside of facility to know whether the environment alvariation exists. We measured continuously the temperature and relative humidity, twice for the particulate, once for the $SO_2$(sulfur dioxide), $NO_2$(nitrogen dioxide)and $O_3$(ozone) from September $1_st$, 2000 to August $31_st$, 2001.The temperature and relative humidity, have a tendency to vary, and they have no difference between the inside and the outside. As dewy phenomenon doesn appear on the surface of the Pagoda and facility we know that the inside air is moving. As a result of the particulate is $64\mug$/$m_3$ of average concentration, the particulate fluxed inside don’t flow out because air-velocity of the outside is faster than that of the inside. The air pollutants are 0.036ppm/hr of SO$_2$average concentration, 0.028ppm/hr of $NO_2$ average concentration and 0.008ppm/hr of $O_3$ average concentration which are lower than the Environmental Air Quality Standards($SO_2$ : 0.15ppm/hr, $NO_2$ : 0.25ppm/hr,O3 : 0.1ppm/hr).

• Proceedings of the Korea Society for Energy Engineering kosee Conference
• /
• 2000.04a
• /
• pp.43-50
• /
• 2000

The flow field of a 1 Ton/Day entrained-flow gasifier constructed in KIER was numerical simulate in this paper. The standard $k-{\varepsilon}$ turbulence model and simple procedure was used with the Primitive-Variable methods during computation. In order to find the influence factors of the flow field which may have great effects on coal gasification process inside gasifier, difference geometry parameters at various operating conditions were studied by simulation methods. The calculation results show that the basic shape of the flow field is still parabolic even the oxygen gas is injected from the off-axis position. There exist an obvious external recirculation zone with a length less than 1.0m and a small internal recirculation region nears the inlet part. The flow field inside the new gasifier is nearly similar as that of the old 0.5T/D gasifier at same position if the design of burner remains unchanged.

• Journal of Biomedical Engineering Research
• /
• v.26 no.2
• /
• pp.95-99
• /
• 2005

We have performed EEG current source imaging on the cortical surface using visual evoked potentials (VEPs) recorded inside a 3.0 T MRI magnet. In order to remove ballistocardiogram (BCG) artifacts in the VEPs, an improved BCG template subtraction technique is devised. Using the cortically constrained current source imaging technique and pattern-reversal visual stimulations, we have obtained current source maps from 10 subjects. To validate the EEG current source imaging inside the magnet, we have compared the current source maps to the ones obtained outside the magnet. The experimental results demonstrate that there is a strong correspondence between the current source maps, proving that current source imaging is feasible with the evoked potentials recorded inside a 3.0 T MRI magnet.

• Nuclear Engineering and Technology
• /
• v.54 no.11
• /
• pp.4159-4169
• /
• 2022

Hydrogen mitigation using Passive Autocatalytic Recombiners (PARs) has been widely accepted methodology inside reactor containment of accident struck Nuclear Power Plants. They reduce hydrogen concentration inside reactor containment by recombining it with oxygen from containment air on catalyst surfaces at ambient temperatures. Exothermic heat of reaction drives the product steam upwards, establishing natural convection around PAR, thus invoking homogenisation inside containment. CFD models resolving individual catalyst plate channels of PAR provide good insight about temperature and hydrogen recombination. But very thin catalyst plates compared to large dimensions of the enclosures involved result in intensive calculations. Hence, empirical correlations specific to PARs being modelled are often used in integral containment studies. In this work, an experimentally validated CFD model of PAR has been employed for developing an empirical correlation for Indian PAR. For this purpose, detailed parametric study involving different gas mixture variables at PAR inlet has been performed. For each case, respective values of gas mixture variables at recombiner outlet have been tabulated. The obtained data matrix has then been processed using regression analysis to obtain a set of correlations between inlet and outlet variables. The empirical correlation thus developed, can be easily plugged into commercially available CFD software.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.18 no.3
• /
• pp.71-83
• /
• 2016

This study attempted to analyze trends of structural changes in the front middle part of men's underwear and get basic data for the development of men's underwear patterns. In terms of a research method, the structure and pattern of the front middle part of men's underwear were analyzed by referring to the design and description of the drawing, focusing on men's underwear which targeted to isolate penis from scrotum among the 'men's underwear' or 'functional men's underwear'-related patents. According to the study, three topics were obtained as follows: a support attached to the inside of the front middle part; inner cloth attached to the inside of the front middle part; change in the structure of the front middle panel. The aspects by the specific topic targeted to isolate penis from scrotum and prevent the scrotum from adhered to a thigh are as follows: 1) When a support is attached to the inside of the front middle part, the following three methods are proposed: Penis isolated from scrotum by a rest which is designed using the band; penis and scrotum rested in the band and in a pocket respectively; protruded rest inside the front middle part of the underwear. 2) When an inner cloth is attached to the inside of the front middle part, the following methods are designed: A pocket-type inner cloth is attached; isolation of penis hole from the scrotum pocket using a rectangular separator; U-shaped pocket designed to rest penis and scrotum is attached. 3) Regarding change in the structure of the front middle panel, the integration of penis and scrotum resting parts can be divided into two cases: Securing a space using wrinkles; keeping it voluminous using the vertical line. In this all-in-one penis and scrotum-holding type, in addition, different front panel patterns were applied.

• Nuclear Engineering and Technology
• /
• v.50 no.7
• /
• pp.1184-1189
• /
• 2018

Pyroprocessing uses various molten salts during electrochemical unit processes. Reaction products after the electrochemical processes must contain a significant amount of residual salts to be separated. Vacuum distillation is a common method to separate the residual salts; however, its high operation temperature may cause side reactions. In this study, a simple rotation technique using centrifugal force was suggested to separate the residual salts from the reaction products at relatively low temperature compared to the distillation technique. When a reaction product container with porous wall rotates inside a vessel heated above the melting point of the residual salt, the residual salt in the liquid phase is separated through centrifugal force. It was shown that the $LiNO_3-Al_2O_3$ mixture can be separated by this technique to leave solid $Al_2O_3$ inside the container, with a separation efficiency of 99.4%.

• Proceedings of the KSR Conference
• /
• 2008.11b
• /
• pp.1441-1447
• /
• 2008

This research studies the effects of community noise around railway, noise from the inside/outside noise of the High-Speed EMU. First study part of this year is research of the noise source. The modeling methodology for prediction of noise level including the frequency property, velocity dependence, sound pressure of noise source is investigate. Second part is research on the sound transmission loss. An exclusive program which could analyze the sound transmission loss of the floor, the sides(mirror), insulator in High-Speed EMU has to be developed. Third part is research on the train inside/outside and Prediction for community Noise. In order to predict the noise when the High-Speed EMU is traveling at the outside and along tunnels, the result of the research can be derived by evaluating the effect of the noise on the upper/middle parts of the carriage and on the railroad way round about with using the program.