• 한국수소및신에너지학회논문집
• /
• 제25권2호
• /
• pp.173-182
• /
• 2014

Dimethyl ether (DME) is a new clean fuel as an environmentally-being energy resources. DME has similar characteristics to those of LPG and can be substituted Diesel fuel. KOGAS has investigated and developed new innovative DME synthesis process from synthesis gas with KOGAS's own technologies. KOGAS had finished the construction of 10ton/day DME demonstration plant in 2008, we have established the basic design of commercial plant which can produce 3,000ton/day DME. Specifically, an economic model for a commercial DME project will be presented. It accounts for all the major cost factors that are considered in a commercial scale project as the model input for performing cash flow analysis, after which key economic indicators are produced including the internal rate of return (IRR), net present value (NPV). Sensitivity analysis is performed to identify dominant cost factors to the project economics and quantify their impact. The inputs to the economic analysis will be based on representative cost factors from the commercial-scale design of KOGAS' direct DME process supplemented by literature data. Case study results will be presented based on recent commercialization projects.

• 전기전자학회논문지
• /
• 제22권1호
• /
• pp.213-215
• /
• 2018

본 연구에서는 실리콘 기판 위에 DC 스퍼터링 방법을 이용하여 비정질 탄소박막을 제작하고, 흡광특성과 광발열 특성을 조사하였다. 비정질 탄소박막은 1000 nm 파장에서 97%의 흡광도를 보였으며, 백색광이 조사됨에 따라 비정질 탄소박막의 온도는 $21.1^{\circ}C$에서 $24.1^{\circ}C$로 상승하여 약 $3^{\circ}C$의 온도가 증가하였다. 또한, 백색광이 50초 동안 조사되는 동안 비정질 탄소박막에서는 기판에 비해 4배 빠른 온도상승속도로 온도가 증가하였다.

• 대한지역사회영양학회지
• /
• 제3권4호
• /
• pp.630-641
• /
• 1998

As the incidence of diet-related diseases increase, much attention has been focused of traditional foods. Traditional foods are ultimately based on local foods. However, there has been little study looking into the recipes and nutritional value of local foods. Therefore, the present study was designed to standardize recipes and analyze the nutrients of some representative local foods of Cheollabuk-do Province. Their foods were Cheonju pibimpap, kongnamulgukpap, minmuljangokui, aejeotchim and aguytichim. Test recipes for each food were prepared, being based on various information obtained from personal interviews, literature surveys of restaurant recipes. Then test recepe was subjected to sensory evaluation. All characteristics of each food were judged as "satisfactory". The analysis of nutrient composition revealed that in general energy content was low whereas protein content was as high as recommended reguirement in all foods except for kongnamulgukpap. Vitamin content was generally high but contents of calcium and iron were relatively low in all foods. Cheonju pibimpap was rich in dietary fiber. Dietary fiber content of Cheonju pibimpap was 16.6g per serving size. All foods contained considerable amounts of essential amino acids. The major fatty acide were oleic acid, linoleic acid and glutamic acid, oleic acid being the highest in terms of composition ratio.ion ratio.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제7권6호
• /
• pp.1056-1063
• /
• 2015

Waves can be expressed in terms of a spectrum; that is, the energy density distribution of a representative wave can be determined using statistical analysis. The JONSWAP, PM and BM spectra have been widely used for the specific target wave data set during storms. In this case, the extracted wave data are usually discontinuous and independent and cover a very short period of the total data-recording period. Previous studies on the continuous wave spectrum have focused on wave deformation in shallow water conditions and cannot be generalized for deep water conditions. In this study, the Generalized Extreme Value (GEV) function is proposed as a more-optimal function for the fitting of the continuous wave spectral shape based on long-term monitored point wave data in deep waters. The GEV function was found to be able to accurately reproduce the wave spectral shape, except for discontinuous waves of greater than 4 m in height.

• 시스템엔지니어링학술지
• /
• 제16권2호
• /
• pp.131-140
• /
• 2020

The characteristics of ballistic missiles are changing rapidly but studies have mostly focused on fragmentary flight trajectory analysis estimating the changing characteristics of some types, while there is a lack of research on comprehensive and efficient ballistic search, detection and prediction for missiles including the new types that have been gaining attention lately. This paper analyzes the flight trajectory characteristics of ballistic missiles at various ranges considering flight path angle adjustment, specific impulse and drag force with altitude based on the optimized equations of motion reflecting the parameters of North Korea's general and new types of ballistic missiles. The flight trajectory characteristics of representative ranges for each ballistic missile were analyzed by adjusting the flight path angle in the minimum energy method, lofted method, and depressed method. In addition, High value target can attacked by ballistic missiles considering flight path angle adjustment at various points. It's expected to be used to Threat Evaluation and Weapon Allocation, and deployment of defense systems by interpreting the analysis of the latest Iskander-class ballistic missiles and the new multiple rocket launcher.

• Composites Research
• /
• 제36권1호
• /
• pp.53-58
• /
• 2023

PIC 설계 방법은 선행 유한요소해석을 통해 하중 유형을 나누어, 각 구간마다 하중 유형에 강한 복합재료의 적층 각도 순서를 배치하는 방법이다. 기존 연구에서는 효율적으로 구간을 나누기 위하여 PIC 설계 방법에 머신 러닝이 적용되었으며, 학습 데이터는 선행 유한요소해석 결과 값을 통해 전체 요소의 일부인 참조 요소에서의 인장, 압축 그리고 전단과 같은 하중 유형으로 나누어 라벨링 되었다. 하지만 좌굴에 대해 고려되지 않아서 좌굴 발생 시, 적절한 하중 유형으로 나눌 수 없기 때문에 이를 해결하기 위한 방법이 필요하다. 본 연구에서는 좌굴이 고려되기 위한 새로운 하중 유형 분석 방법을 기존의 PIC 설계에 적용하는 기법(PIC-NTL)이 제안되었다. 좌굴의 하중 분석은 각 플라이(Ply)별 응력 3축 특성을 통해 진행되었으며, 요소의 두께 방향으로 동일한 크기의 두 영역으로 나누어진 판단 영역 내에서 결정된 하중 유형을 통해 대표 하중 유형이 지정되었다. 학습 데이터의 특성 값은 참조 요소의 좌표, 라벨(Label)은 각 판단 영역의 대표 하중 유형으로 구성되었으며, 이 데이터를 통해 머신 러닝 모델이 학습되었다. 머신 러닝 모델의 성능에 영향을 미치는 하이퍼파라미터는 베이지안 알고리즘을 통하여 최적 값으로 튜닝되었다. 튜닝 된 머신 러닝 모델의 중 SVM 모델이 가장 높은 예측률과 ROC-AUC로 나타났으며, 해당 모델을 통해 예측된 데이터가 유한요소 모델에 매핑되었다. 기존에 제안된 PIC 설계 방법과 비교하기 위하여 사각관 형태의 모델을 압축시키는 유한요소해석이 진행되었으며, 본 연구에서 제안된 설계 방법이 강도와 에너지 흡수율에서 더 우수함이 검증되었다.

• 비교문화연구
• /
• 제27권
• /
• pp.167-195
• /
• 2012

A Chinese female writer Linhaiyin(林海音) and Chengnanjiushi(城南舊事), her representative work, have never been studied in Korea before although she and her literary works stand high and are well known in the history of the modern Chinese literature. Thus, in this paper, I analyze her and her novels included in Chengnanjiushi and study their literary value and meaning. To analyze and study them, I mainly consider novels Anhuiguan, Womenkanhaiqu, Lanyiniang, $L{\acute{\ddot{u}}}dagunr$, and Babadehuarluole included in Chengnanjiushi. Firstly, I look into her attitude and mode to observe children and women's life as a writer. Such attitude and mode succeeded to the spirit of the '5.4 literature'. Secondly, I evaluate Linhaiyin's 'Both sides complex' and its value in the history of literature. From this evaluation, the meaning of Linhaiyin's literature is highlighted. She was free from 'Both sides complex' occurred due to the circumstance of the times and played a role of a bridge so as not to break off literature of China and Taiwan. When her and her works are evaluated, this is one of the most important values. The characteristic of her writing mode is that she did not seek a compelling climax, a surprising reversal, or an exclusive plot or character in her works. In her works, plain description or unwitting conversation and story often imply deep meanings. Thus, at unexpected moment after reading her novels, readers truly listen to deep resonance for her attitude and mode to observe people's life. This is exactly her potential energy that makes readers sink into her literary world regardless of time and space.

• 공업화학
• /
• 제33권6호
• /
• pp.636-645
• /
• 2022

이 연구에서는 은행껍질기반 활성탄으로 음이온성 염료인 메틸오렌지(MO)의 흡착 특성을 조사하였다. 이를 위해 은행껍질과 대표적인 화학활성화제인 수산화칼륨(KOH)을 이용하여 서로 다른 기공 특성을 지닌 다공성 활성탄(GS-1, GS-2, GS-4)을 제조하였다. 제조한 활성탄의 구조적 특성값과 KOH 혼합비율과의 상관관계는 질소 흡/탈착등온선으로 조사하였다. 활성탄에 대한 MO 흡착 평형 실험은 서로 다른 pH (pH 3~11) 및 온도(298~318 K) 조건에서 실시하였으며 그 결과를 Langmuir, Freundlich, Sips 및 온도 의존 Sips식으로 살펴보았다. 그리고 Langmuir 무차원 분리계수값으로 제조한 활성탄의 MO 흡착처리공정의 타당성을 조사하였다. 흡착에너지분포함수(AED)로 비교 분석한 활성탄에 대한 MO의 불균일 흡착 특성은 온도와 활성탄의 구조적 특성과 밀접한 관련이 있었다. 서로 다른 온도에서 수행한 회분식 흡착 속도 실험 결과는 외부물질전달, 입자 내 확산 및 활성사이트의 흡착을 고려한 균일표면확산모델(HSDM)로 만족스럽게 설명할 수 있었다. 또한 표면확산계수값을 Arrhenius 플롯으로 나타내어 구한 활성화에너지와 흡착에너지분포 함수값과의 상관관계를 살펴보았다. 그리고 Biot 수를 이용하여 제조한 활성탄에 대한 MO의 흡착 공정 메커니즘을 평가하였다.

• 한국근적외분광분석학회:학술대회논문집
• /
• 한국근적외분광분석학회 2001년도 NIR-2001
• /
• pp.1610-1610
• /
• 2001

Microbiological examination of silage is of little value in gauging the outcome of silage, and so chemical analysis is more reliable and meaningful indicator of quality. On the other hand chemical assessments of the principal fermentation products provide an unequivocal basis on which to judge quality. Livestock require energy, protein, minerals and vitamins from their food. While fresh forages provide these essential items, conserved forages on the other hand may be deficient in one or more of them. The aim of the conservation process is to preserve as many of the original nutrients as possible, particularly energy and protein components (Woolford, 1984). Silage fermentation is important to preservation of forage with respect of feeding value and animal performance. Chemical and bacteriological changes in the silo during the fermentation process can affect adversely nutrient yield and quality (Moe and Carr, 1984). Many of the important chemical components of silage must be assayed in fresh or by extraction of the fresh material, since drying either by heat or lyophilisation, volatilises components such as acids or nitrogenous components, or effects conversion to other compounds (Abrams et al., 1987). Maize silage dorms the basis of winter rations for the vast majority of dairy and beef cattle production in Uruguay. Since nutrient intake, particularly energy, from forages is influenced by both voluntary dry matter intake and digestibility; there is a need for a rapid technique for predicting these parameters in farm advisory systems. Near Infrared Reflectance Spectroscopy (NIRS) is increasingly used as a rapid, accurate method of evaluating chemical constituents in cereals and dried forages. For many years NIRS was applied to assess chemical composition in dry materials (Norris et al., 1976, Flinn et al., 1992; Murray, 1993, De Boever et al., 1996, De la Roza et al., 1998). The objectives of this study were (1) to determine the potential of NIRS to assess the chemical composition of dried maize samples and (2) to attempt calibrations on undried samples either for farm advisory systems or for animal nutrition research purposes in Uruguay. NIRS were used to assess the chemical composition of whole - plant maize silage samples (Zea mays, L). A representative population of samples (n = 350) covering a wide distribution in chemical characteristics were used. Samples were scanned at 2 nm intervals over the wavelength range 400-2500 nm in a NIRS 6500 (NIRSystems, Silver Spring, MD, USA) in reflectance mode. Cross validation was used to avoid overfitting of the equations. The optimum calibrations were selected on the basis of minimizing the standard error of cross validation (SECV). The calibration statistics were R$^2$ 0. 86 (SECV: 11.4), 0.90 (SECV: 5.7), 0.90 (SECV: 16.9) for dry matter (DM), crude protein (CP), acid detergent fiber (ADF) in g kg$\^$-1/ on dry matter, respectively for maize silage samples. This work demonstrates the potential of NIRS to analyse whole - maize silage in a wide range of chemical characteristics for both advisory farm and nutritive evaluation.

• 신재생에너지
• /
• 제4권2호
• /
• pp.68-73
• /
• 2008

It is very important that constitution of good hetero-junction interface with a high quality amorphous silicon thin films on very cleaned c-Si wafer for making high efficiency hetero-junction solar cells. For achieving the high efficiency solar cells, the inspection and management of c-Si wafer surface conditions are essential subjects. In this experiment, we analyzed the c-Si wafer surface very sensitively using Spectroscopic Ellipsometer for < ${\varepsilon}2$ > and u-PCD for effective carrier life time, so we accomplished < ${\varepsilon}2$ > value 43.02 at 4.25eV by optimizing the cleaning process which is representative of c-Si wafer surface conditions very well. We carried out that the deposition of high quality hydrogenated silicon amorphous thin films by RF-PECVD systems having high density and low crystallinity which are results of effective medium approximation modeling and fitting using spectroscopic ellipsometer. We reached the cell efficiency 12.67% and 14.30% on flat and textured CZ c-Si wafer each under AM1.5G irradiation, adopting the optimized cleaning and deposition conditions that we made. As a result, we confirmed that spectroscopic ellipsometry is very useful analyzing methode for hetero-junction solar cells which need to very thin and high quality multi layer structure.