• Applied Chemistry for Engineering
• /
• v.31 no.5
• /
• pp.495-501
• /
• 2020

In this study, zirconium fumarate of metal-organic framework (MOF-801) was solvothermally synthesized at 130 ℃ and characterized through powder X-ray diffraction (PXRD) analyses and porosity measurements from N₂ sorption isotherms at 77 K. The ability of MOF-801 to act as an adsorbent for the phosphate removal from aqueous solutions at 25 ℃ was investigated. The phosphate removal efficiency (PRE) obtained by 0.05 g/L adsorbent dose at an initial phosphate concentration of 60 ppm after 3 h was 72.47%, whereas at 5 and 20 ppm, the PRE was determined to be 100% and 89.88%, respectively, after 30 min for the same adsorbent dose. Brunauer-Emmett-Teller (BET) surface area and pore volume of the bare MOF-801 sample were 478.25 ㎡/g and 0.52 ㎤/g, respectively, whereas after phosphate adsorption (at an initial concentration of 60 ppm, 3 h), the BET surface area and pore volume were reduced to 331.66 ㎡/g and 0.39 ㎤/g, respectively. The experimental data of kinetic (measured at initial concentrations of 5, 20 and 60 ppm) and isotherm measurements followed the pseudo-second-order kinetic equation and the Freundlich isotherm model, respectively. This study demonstrates that MOF-801 is a promising material for the removal of phosphate from aqueous solutions.

• Environmental Engineering Research
• /
• v.24 no.2
• /
• pp.339-346
• /
• 2019

In this research, applicability of electrochemical technology in removing nitrogenous compounds from solid waste landfill leachate was examined. Novel cathode material was developed at laboratory by introducing a Cu layer on Al substrate (Cu/Al). Al and mild steel (MS) anodes were investigated for the efficiency in removing nitrogenous compounds from actual leachate samples collected from two open dump sites. Al anode showed better performances due to the effect of better electrocoagulation at Al surface compared to that at MS anode surface. Efficiency studies were carried out at a current density of $20mA/cm^2$ and at reaction duration of 6 h. Efficiency of removing nitrate-N using Al anode and developed Cu/Al cathode was around 90%. However, for raw leachate, total nitrogen (TN) removal efficiency was only around 30%. This is due to low ammonium-N removal as a result of low oxidation ability of Al. In addition to the removal of nitrogenous compounds, reactor showed about 30% removal of total organic carbon. Subsequently, raw leachate was diluted four times, to simulate pre-treated leachate. The diluted leachate was treated and around 88% removal of TN was achieved. Therefore, it can be said that the reactor would be good as a secondary or tertiary treatment step in a leachate treatment plant.

• Journal of IKEEE
• /
• v.25 no.1
• /
• pp.83-87
• /
• 2021

In harsh environments such as fog or fine dust, the cameras' detection ability for object recognition may significantly decrease. In order to accurately obtain important information even in bad weather, fog removal algorithms are necessarily required. Research has been conducted in various ways, such as computer vision/data-based fog removal technology. In those techniques, estimating the amount of fog through the input image's depth information is an important procedure. In this paper, a linear model is presented under the assumption that the image dark channel dictionary, saturation ∗ value, and sharpness characteristics are linearly related to depth information. The proposed method of haze removal through a linear model shows the superiority of algorithm performance in quantitative numerical evaluation.

• Korean Journal of Materials Research
• /
• v.31 no.6
• /
• pp.345-352
• /
• 2021

In this study, Ni nanoparticle supported by graphene oxide (GO) (Ni-GO) is successfully synthesized through hydrothermal synthesis and calcination, and Cr(VI) is extracted from aqueous solution. The morphology and structure of Ni-GO composites are characterized by scanning electron microscopy (SEM), trans mission electron microscopy (TEM), X-ray diffraction (XRD) and X-ray photoelectron spectroscopy (XPS). High-resolution transmission electron microscopy (HRTEM) and XRD confirms the high dispersion of Ni nanoparticle after support by GO. Loading Ni on GO can obviously enhance the stability of Ni-GO composites. It can be calculated from TGA that the mass percentage of Ni is about 60.67 %. The effects of initial pH and reaction time on Cr(VI) removal ability of Ni-GO are investigated. The results indicate that the removal efficiency of Cr(VI) is greater than that of bared GO. Ni-GO shows fast removal capacity for Cr(VI) (<25 min) with high removal efficiency. Dynamic experiments show that the removal process conforms to the quasi-second order model of adsorption, which indicates that the rate control step of the removal process is chemical adsorption. The removal capacity increases with the increase of temperature, indicating that the reaction of Cr(VI) on Ni-GO composites is endothermic and spontaneous. Combined with tests and characterization, the mechanism of Cr(VI) removal by rapidly adsorption on the surface of Ni-GO and reduction by Ni nanoparticle is investigated. The above results show that Ni-GO can be used as a potential remediation agent for Cr(VI)-contaminated groundwater.

• The Korean Journal of Food And Nutrition
• /
• v.30 no.6
• /
• pp.1286-1291
• /
• 2017

In this study, Pyracantha angustifolia (Franch.) C. K. Schneid was extracted with 70% methanol at room temperature for 48 hrs and concentrated under reduced pressure to measure its total polyphenol contents; furthermore, the effect of electron donating ability was examined. Methylene chloride, ethyl acetate, and methanol were used to fractionate the extract to testify total polyphenol contents, electron donating abilities, the removal abilities of superoxide radical as well as hydrogen peroxide. The total polyphenol contents were $2007.30{\pm}109.28{\mu}g\;GAE/mL$ in 70% methanol extract, $273.39{\pm}10.19{\mu}g\;GAE/mL$ in methylene chloride fraction, $80.57{\pm}0.64{\mu}g\;GAE/mL$ in ethyl acetate fraction, and $1,160.87{\pm}44.71{\mu}g\;GAE/mL$ in methanol fraction. The total polyphenol contents showed significant differences (p<0.05) between the solvents. The electron donating ability was $79.07{\pm}7.31%$ for 70% methanol extract, $22.34{\pm}0.64%$ for methylene chloride fraction, $5.33{\pm}0.28%$ for ethyl acetate fraction, and $32.26{\pm}1.10%$ for methanol fraction. The electron donating abilities were significantly different(p<0.05) between the solvents. The removal ability of superoxide radical was $0.018{\pm}0.003$ for 70% methanol extract, $0.007{\pm}0.002$ for methylene chloride fraction, $0.0147{\pm}0.003$ for ethyl acetate fraction, and nothing for methanol fraction. The measurement of hydrogen peroxide decomposition was $0.022{\pm}0.0046$ for 70% methanol extract, $0.0027{\pm}0.0015$ for methylene chloride fraction, $0.0037{\pm}0.0012$ for ethyl acetate fraction, and $0.0009{\pm}0.0001$ for methanol fraction.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.29 no.4
• /
• pp.25-31
• /
• 2021

In this research, in order to effectively utilize the petroleum residue pitch, it was used as an adsorbent for removal of cesium ion. In this experiment, acid modification (hydrochloric acid, sulfuric acid) treatment was performed on the adsorbent to improve the ability to remove low-concentration cesium ions dissolved in water. As a result, when the reaction was performed with 9 M sulfuric acid at 25 ℃ and for 240 min, the removal efficiencies of 1.0 and 2.5 mg/L cesium ions were 66 and 51%, respectively. In addition, as the adsorption time increased in the batch experiment, the removal capacity of 1.0 and 2.5 mg/L cesium ions was improved, and when the adsorption reached for 32 hr, the removal efficiencies were 72 and 68%, respectively. Also, in order to increase the ability to remove the remaining cesium ions, an experiment was performed by temperature change (25, 37, 49 ℃), and 1.0 and 2.5 mg/L cesium ions contained in water under the operating conditions of 49 ℃ and 32 hr showed removal efficiencies of 90 and 81%, respectively. Consequently, these experimental results were intended to be used as an adsorption technology that can economically treat low-concentration cesium ions contained in water.

• Journal of Environmental Impact Assessment
• /
• v.18 no.2
• /
• pp.79-87
• /
• 2009

This study was performed for the application of porous concrete blocks and aquatic plants for the water purification in small urban stream. This study investigated the ability of water purification according to various environments, algae and aquatic plants. When the porous concrete was used as contact media, the average removal efficiencies of SS, BOD and COD were 85~95%, 50~60% and 65~75%, respectively. Also, when the porous concrete and aquatic plants was used the average removal efficiency of SS, BOD and COD were 90~95%, 60~70% and 70~80%, respectively. As the results, average removal efficiency of total nitrogen, at the condition of the porous concrete and aquatic plants, was about 40-50%, then, that of total phosphorus was about 60-70%.

• Korean Journal of Microbiology
• /
• v.29 no.2
• /
• pp.117-122
• /
• 1991

In order to improve the removal ability of phosphate, Spheroplast fusions were performed among auxotrophic mutants of Aeromonas hydrophila isolated from waste water, named A13 and A14, Aci37 auxotrophic mutant of Acinetobactercalcoaceticus, and auxotrophic E. coli HR262/pCE27 carring pit gene. Eight fusants obtained from this experiment showed different biochemical characteristics. When the rate of phosphate uptake among fusants (F1-F8) was investigated in Phosphate Uptake Medium (PUM), F8 strain showed the highest rate for phosphate removal, 7 times as much as control after two hours incubation. The role of cations ($Mg^{++}$ ,$Ca^{++}$ , $K^{+}$ in phosphate uptade by F8 was also investigated in PUM without each salt. $K^{+}$ seemed to be crucial. Being compared with phosphate untake rate in PUM, that in PUM without $K^{+}$ was reduced 1.5 times. Therefore, by applying F8 strain and $K^{+}$ in practical environmental system, the increased efficiency in phosphate removal can be derived.

• 한국생물공학회:학술대회논문집
• /
• 2000.11a
• /
• pp.553-556
• /
• 2000

Possibility of biological nitrogen treatment was tested in wastewaters with low C/N ratio. Chlorella kessleri was inoculated at $10^6\;cell/mL$ of initial density in two different artificial wastewaters: one that contained glucose for organic carbon source and the other without carbon source. Nitrate could be successfully reduced below 10 mg $NO_3/mL$ from initial nitrate concentration of 560 mg $NO_3/mL$ in 10 days even in the wastewater without carbon source, This 98% removal of nitrate without extra organic carbon source lights up the future of biological wastewater treatment, where the insufficient ability of nitrogen removal is a major problem.

• Biotechnology and Bioprocess Engineering:BBE
• /
• v.11 no.5
• /
• pp.462-465
• /
• 2006

An important issue in the oxidation of pentachlorophenol (PCP) by the enzyme horseradish peroxidase (HRP) is enzyme inactivation during the reaction. This study was initiated to investigate the ability of two nonionic surfactants (Tween 20 and Tween 80) to mitigate HRP inactivation. The surfactants were tested at concentrations below and above their critical micelle concentrations (CMCs). Enhancement of PCP oxidation was observed at sub-CMCs, indicating effective protection of HRP by the two surfactants. Maximum levels of PCP removal were observed when the concentrations of Tween 20 and Tween 80 were 40 and 50% of the CMCs, respectively At supra-CMCs, both surfactants caused a noticeable reduction in the extent of PCP removal.