• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2006년도 하계학술대회 논문집 Vol.7
• /
• pp.290-291
• /
• 2006

The effect of praseodymium substitution on the ferroelectric properties of $Bi_4Ti_3O_{12}$ thin films have been investigated. Ferroelectric Pr-substituted $Bi_4Ti_3O_{12}$ thin films were fabricated by chemical solution deposition onto Pt/Ti/$SiO_2$/Si substrates. The structure and morphology of the films were analyzed using Xray diffraction, and scanning electron microscopy, respectively. About 200-nm-thick BPT films grown at $720^{\circ}C$ exhibited a polycrystalline structure and showed excellent ferroelectric properties with a remanent polarization ($2P_r$) of $28.21\;{\mu}C/cm^2$ at an applied voltage of 5 V. The films a1so demonstrate fatigue-free behavior up to $10^{11}$ read/write switching cycles with 1 MHz bipolar pulses at an electric field of ${\pm}5\;V$.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2006년도 하계학술대회 논문집 Vol.7
• /
• pp.382-383
• /
• 2006

The tungsten bronze type of strontium barium niobate(SBN) thin film was synthesized by metal organic decomposion method for SBN stock solution and the SBN thin film process were deposited by spin-coating process on Pt-deposited si-wafer(100) by magnetron sputtering system. The thickness of SBN thin film was 150~200 nm and were optimized for rpm of spin-coater system. The structural variation of SBN thin film was studied by TG-DTA and XRD. The deposited SBN stock solution on annealing at $400{\sim}800^{\circ}C$ a pure tungsten bronze SBN phase and the corresponding. average grain size about 500~1000 nm influenced by annealing temperature. The piezoelectric properties of prepared SBN thin film, the remanent polarization value(2Pr) and coercive field was $1.2{\mu}C/cm^2$ and 2.15V/cm, respectively.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2006년도 하계학술대회 논문집 Vol.7
• /
• pp.276-277
• /
• 2006

1mm-thick BLT ceramics were sintered in accordance with a bulk ceramic fabrication process. AII XRD peaks detected in the sintered ceramics were indexed as the Bi-layered perovskite structure without secondary phases. Density was increased with increasing the sintering temperature up to $1050^{\circ}C$ and the maximum value was about 98% of the theoretical density. The remanent polarization (2Pr) value of BLT ceramic sintered at $1050^{\circ}C$ was approximately $6.5\;{\mu}C/cm^2$ at the applied voltage of 4.5 kV. The calculated electromechanical coupling factor ($k_t$) of it was about 5% and the mechanical quality factor (Qm) was about 2200. From these results, a BLT ceramic target for pulsed laser deposition (PLD) system was successfully fabricated.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2007년도 하계학술대회 논문집 Vol.8
• /
• pp.171-171
• /
• 2007

Dysprosium-doped bismuth titanate (BDT) thin films were successfully deposited on Pt(111)/Ti/$SiO_2$/Si(100) substrates by liquid delivery MOCVD process and their structural and ferroelectric properties were characterized. Fabricated BDT thin films were found to be random orientations, which were confirmed by X-ray diffraction experiment and scanning electron microscope analysis. The crystallinity of the BDT films was improved and the average grain size increased as the crystallization temperature increased from 600 to $720^{\circ}C$ at an interval of $40^{\circ}C$. The BDT thin film annealed at $720^{\circ}C$ showed a large remanent polarization (2Pr) of $52.27\;{\mu}C/cm^2$ at an applied voltage of 5V. The BDT thin film exhibits a good fatigue resistance up to $1.0{\times}10^{11}$ switching cycles at a frequency of 1 MHz with applied pulse of ${\pm}5\;V$. These results indicate that the randomly oriented BDT thin film is a promising candidate among ferroelectric materials useti비 in lead-free nonvolatile ferroelectric random access memory applications.

• 한국진공학회지
• /
• 제8권3A호
• /
• pp.238-244
• /
• 1999

Pt/SBT/Pt capacitors were fabricated using the MOD-derived $SrBi_{2x}Ta_2O_9$ (SBT) films and their ferroelectic and leakage current characteristics were investigated with post annealing at 400~$800^{\circ}C$. Although the MOD-derived SBT film exhibited the hysteresis loop typical for the leaky film, the well-saturated ferroelectric hysteresis loop could be obtained by post annealing the Pt/SBT/Pt capacitors at $550^{\circ}C$~$800^{\circ}C$. The remanent polarization $2P_r$ of the SBT film exhibited a maximum value of 9.72$\mu\textrm{cm}^2$ with post annealing at $600^{\circ}C$, and then decreased with increasing the post annealing temperature above $600^{\circ}C$. The MOD-derived SBT films exhibited the high leakage current density of ~$10^{-3} \textrm{A/cm}^2$ at 75kV/cm. With post annealing the Pt/SBT/Pt capacitor at 600~$800^{\circ}C$, however, the leakage current density decreased remarkably to less than $10^{-6}\textrm{A/cm}^2$ at 75kV/cm.

• 한국세라믹학회지
• /
• 제41권5호
• /
• pp.401-405
• /
• 2004

순수한 SrB $i_2$T $a_2$$O_{9}$ 세라믹스와 도너와 억셉터가 치환된 S $r_{0.99}$B $i_2$(T $a_{0.99}$ $W_{0.01}$)$_2$$O_{9}$ 와 SrB $i_2$(T $a_{0.99}$ $Ti_{0.01}$)$_2$ $O_{8.99}$ 세라믹스를 제조하고 미세구조, 강유전 P-E 이력특성, 상전이 온도를 조사하였다. 입자크기는 SrB $i_2$T $a_2$$O_{9}$ 세라믹스의 강유전 이력곡선에는 영향을 주지 않았다. 도너를 치환한 S $r_{0.99}$B $i_2$(T $a_{0.99}$ $W_{0.01}$)$_2$$O_{9}$ 세라믹스는 순수한 SrB $i_2$T $a_2$$O_{9}$ 세라믹스보다 잔류 분극이 크고 더욱 포화된 강유전 P-E 이력곡선을 보였으며, 억셉터가 치환된 SrB $i_2$(T $a_{0.99}$ $Ti_{0.01}$)$_2$ $O_{8.99}$ 세라믹스는 잔류분극이 크게 감소하여 가운데가 잘록한 모양을 보였다. 도너가 치환된 S $r_{0.99}$B $i_2$(T $a_{0.99}$ $W_{0.01}$)$_2$$O_{9}$ 세라믹스의 강유전 분극이 순수한 SrB $i_2$T $a_2$$O_{9}$ 세라믹스보다 더 큰 것은 Sr 공공의 생성에 의하여 분역벽 이동이 용이해졌기 때문이다.동이 용이해졌기 때문이다.동이 용이해졌기 때문이다.동이 용이해졌기 때문이다.

• 센서학회지
• /
• 제6권1호
• /
• pp.56-62
• /
• 1997

고주파 마그네트론 스펏터링법을 이용하여 La 성분비에 따른 PLT 박막을 제조하였다. 낮은 분위기압력하에서 PLT 박막은 높은 C 축 배향성을 보였다. PLT 박막의 C축 배향성은 분위기 압력과 La 성분비가 증가할수록 XRD 와 SEM 분석에서 감소함을 확인하였다. La의 성분비가 증가할수록 PLT 박막의 비유전율은 증가하였으며 잔류분극은 감소하였다.

• 한국결정성장학회지
• /
• 제30권5호
• /
• pp.183-188
• /
• 2020

에어로졸 증착법에 의해서 상온에서 5~10 ㎛ 두께의 PZN-PZT(0 %, 20 %, 40 %) 복합체의 막을 실리콘/사파이어 기판 위에서 제조하였다. PZN의 농도는 0 %, 20 % 및 40 %까지 첨가하였다. 실리콘기판 및 사파이어 기판 위에서 증착된 막은 전기로에서 700℃ 및 900℃에서 각각 어닐링처리 하였으며 900℃에서 어닐링한 경우의 잔류분극 및 유전 상수 등의 전기적 특성이 700℃에서의 특성보다 우수하였다. 특히 900℃에서 어닐링한 2PZN-8PZT 막의 경우 1200℃에서 소결한 같은 조성의 벌크재에서 얻은 값과 상호 비교하였다. 열처리 온도가 높아짐에 따라 유전상수가 증가하는 경향을 보이는데 이는 후열처리에 따른 막의 결정성의 향상과 입자 성장으로 기인한다.

• 센서학회지
• /
• 제6권3호
• /
• pp.188-193
• /
• 1997

La 조성이 $5{\sim}15%$이고 PbO과잉인 PLT 타겟을 이용하여 MgO(100) 단결정 기판위에 고주파 마그네트론 스펏터링법으로 PLT 박막을 제조하였으며, 고온 XRD 분석을 하였다. 제조조건은 기판온도를 $580^{\circ}C$, 분위기압을 10mTorr, 고주파 전력밀도를 $1.7W/cm^{2}$ 및 $Ar/O_{2}$를 10/1로 하였을 때 PLT 박막들은 La 농도가 증가할수록 c-축 성장율과 정방정형성(c/a)이 감소하였고 확산형 상전이 특성을 나타내었다. 이러한 PLT 박막을 이용하여 초전형 적외선 센서를 제조하였으며, 이력특성과 광특성을 측정하였다. 제조된 적외선 센서는 $1.71{\mu}C/cm^{2}$ 이상의 잔류 분극도를 보였고 500 mV이상의 초전전압을 보였으며 신호대 잡음비는 10:1 이하로 낮았다.

• 한국세라믹학회지
• /
• 제43권2호
• /
• pp.106-113
• /
• 2006

PMN-PZT films with thickness of $5\;{\mu}m$ were deposited on $Pt/Ti/SiO_2/Si$ substrate at room temperature using aerosol deposition process. The films showed fairly dense microstructure without any crack. XRD and TEM analysis revealed that the films consisted of randomly oriented nanocrystalline and amorphous phases. Post-annealing process was employed to induce crystallization and grain growth of the as-deposited films and to improve the electrical properties. The annealed film showed markedly improved electrical properties in comparison with as-deposited film. The film after annealing at $700^{\circ}C$ for 1h exhibited the best electrical properties. Dielectric constant $(\varepsilon_r)$, remanent polarization $(P_r)$ and piezoelectric constant $(d_{33})$ were 1050, $13\;{\mu}C/cm^2$ and 120 pC/N, respectively.