• Title/Summary/Keyword: reliability growth analysis

검색결과 357건 처리시간 0.035초

Reliability Design Based on System Performance-Cost Trade-off for Manufacturing facility

  • Hwang, Heung-Suk;Hwang, Gyu-Wan
    • International Journal of Reliability and Applications
    • /
    • 제2권4호
    • /
    • pp.269-280
    • /
    • 2001
  • The objective of this paper is to provide a model for effective implementation of costing RAM management in the design and procurement of production facility considering the system cost-performance trade-off. This research proposes a two-step approach of costing RAM design and test of system RAM for production facility. In Step 1, a static model is proposed to find an initial system configuration to meet the required performance based on system RAM and LCC and analyzes the trade-off relationships between various factors of RAM and LCC. In the second Step, we developed time and failure truncated models for system reliability test and analysis. For the computational purpose, we developed computer programs and have shown the sample results. By the sample test run, the proposed model has shown the possibilities to provide a good method to analyze system performance evaluation for both design and operational phase, This model can be applied to a wide variety of systems not only for costing RAM of the production facilities but also for the other kinds of equipment.

  • PDF

응력집중부를 갖는 표면균열재의 균열길이 변화에 따른 피로거동 (The Fatigue Behavior by Variety of Crack Length of Surface Cracked Plate with Stress Concentration Part)

  • 남기우;김선진
    • 한국해양공학회지
    • /
    • 제9권1호
    • /
    • pp.83-91
    • /
    • 1995
  • Surface defects in structural members are apt to be origins of fatigue cracks growth, which may cause serious failure of whole structures. Most structure has a part where stress concentrates such as welded joints, corner parts, etc. And then, analysis on crack growth and penetration from these defects, therefore, is one of the most important subjects for the reliability of LBB design. The present paper has performed an experimental and analysis on the fatigue crack propagation by variety in crack length of surface cracked plate with stress concentration part. The crack growth behavior can be explained quantitatively by using Newman-Raju equation and the stress partitioning method proposed by ASME B&P Code Sec. XI. The stress concentration factor $K_t$ has affected on the crack growth. The crack growth after penetration depends upon the initial front side crack length.

  • PDF

피로균열전파저항의 변동성에 의한 균열전파율의 해석 (An Analysis of Crack Growth Rate Due to Variation of Fatigue Crack Growth Resistance)

  • 김선진
    • 대한기계학회논문집A
    • /
    • 제23권7호
    • /
    • pp.1139-1146
    • /
    • 1999
  • Reliability analysis of structures based on fracture mechanics requires knowledge on statistical characteristics of the parameter C and m in the fatigue crack growth law, $da/dN=C({\Delta}K)^m$. The purpose of the present study is to investigate if it is possible to predict fatigue crack growth rate by only the fluctuation of the parameter C. In this study, Paris-Erdogan law is adopted, where the author treat the parameter C as random and m as constant. The fluctuation of crack growth rate is assumed only due to the parameter C. The growth resistance coefficient of material to fatigue crack growth (Z=1/C) was treated as a spatial stochastic process, which varies randomly on the crack path. The theoretical crack growth rates at various stress intensity factor range are discussed. Constant ${\Delta}K$ fatigue crack growth tests were performed on the structural steel, SM45C. The experimental data were analyzed to determine the autocorrelation function and Weibull distributions of the fatigue crack growth resistance. And also, the effect of the parameter m of Paris' law due to variation of fatigue crack growth resistance was discussed.

모발에서 마약류 분석의 법과학적 고찰 - 마약류 범죄수사에서 모발 감정결과의 증거사용에 대해서 - (Forensic Study about Hair Analysis as Legal Evidence of Drug Abuse Crime)

  • 박용훈;한은영;이수연
    • 약학회지
    • /
    • 제52권6호
    • /
    • pp.452-465
    • /
    • 2008
  • Hair analysis for drugs of abuse offers the crucial potential advantage when compared to urine, such as the longer time window of drug intake, which makes retrospective investigation of chronic and/or past consumption. This paper reviews the physiological basis of hair growth, mechanism of drug incorporation, analytical methods, result interpretation and practical application of hair analysis. Moreover, to facilitate the court's decision regarding specific circumstances surrounding the crime, this review demonstrated that the results of hair analysis not only should be admitted as scientific evidence of drug use but also could legally improve reliability of the evidence.

FRACTIONAL POLYNOMIAL METHOD FOR SOLVING FRACTIONAL ORDER POPULATION GROWTH MODEL

  • Krishnarajulu, Krishnaveni;Krithivasan, Kannan;Sevugan, Raja Balachandar
    • 대한수학회논문집
    • /
    • 제31권4호
    • /
    • pp.869-878
    • /
    • 2016
  • This paper presents an ecient fractional shifted Legendre polynomial method to solve the fractional Volterra's model for population growth model. The fractional derivatives are described based on the Caputo sense by using Riemann-Liouville fractional integral operator. The theoretical analysis, such as convergence analysis and error bound for the proposed technique has been demonstrated. In applications, the reliability of the technique is demonstrated by the error function based on the accuracy of the approximate solution. The numerical applications have provided the eciency of the method with dierent coecients of the population growth model. Finally, the obtained results reveal that the proposed technique is very convenient and quite accurate to such considered problems.

코팅지 박리파손에 대한 근본원인분석 (Root Cause Analysis on Delamination Failure between Coating Film and Paper)

  • 이덕보
    • 동력기계공학회지
    • /
    • 제9권1호
    • /
    • pp.57-63
    • /
    • 2005
  • In the calendar and the advertising catalog, the surface is usually coated by coating polypropylene film. The delamination failure of coating film depends on surface roughness and quality of the substrate paper. In this paper, the mechanisms of delamination failure between the coating film and the paper is investigated by using the root cause analysis as one of techniques of reliability evaluation. The papers used in failure analysis are three kind products made by two domestic and one foreign companies. It found that the main causes of delamination failure between the coating film and the paper were the creation of microvoids caused by shape of filler and their growth caused by contraction of paper.

  • PDF

아스팔트 鋪裝道路의 確率論的 表層設計 (Pobabilistic Design of Asphalt Pavement Surface Courae)

  • 김광우;연규석
    • 한국농공학회지
    • /
    • 제34권1호
    • /
    • pp.66-77
    • /
    • 1992
  • A prototype probabilistic approach to thickness design for asphalt pavement surface course was developed using first-order second moment probability model. The tensile strain (load effect) developing at the bottom of surface layer due to the wheel load and the critical strain (resistance) of asphalt concrete were used as random variables for pavement reliability analysis. Based on the parameters for load effect and resistance data collected from reference and field, simulated data were generated by Monte Carlo method for reliability evaluation of the pavement for a typical rural highway. Thickness of pavement surface course was defined in terms of target reliability of the pavement, growth factor of traffic, design life of pavement and resistance of the asphalt concrete to be placed on the pavement. According to these rationales, prototype thickness design chrats were sugested through example studies. From these, similar design charts can be developed for many pavements if appropriate data and target reliability are determined.

  • PDF

Crack growth life model for fatigue susceptible structural components in aging aircraft

  • Chou, Karen C.;Cox, Glenn C.;Lockwood, Allison M.
    • Structural Engineering and Mechanics
    • /
    • 제17권1호
    • /
    • pp.29-50
    • /
    • 2004
  • A total life model was developed to assess the service life of aging aircraft. The primary focus of this paper is the development of crack growth life projection using the response surface method. Crack growth life projection is a necessary component of the total life model. The study showed that the number of load cycles N needed for a crack to propagate to a specified size can be linearly related to the geometric parameter, material, and stress level of the component considered when all the variables are transformed to logarithmic values. By the Central Limit theorem, the ln N was approximated by Gaussian distribution. This Gaussian model compared well with the histograms of the number of load cycles generated from simulated crack growth curves. The outcome of this study will aid engineers in designing their crack growth experiments to develop the stochastic crack growth models for service life assessments.

기후변화에 따른 농업용수공급패턴의 변화로 인한 이수안전도변화분석 (Water Supply Reliability Revaluation For Agricultural Water Supply Pattern Changes Considering Climate Changes)

  • 최영돈;안종서;신현석;차형선
    • 한국수자원학회:학술대회논문집
    • /
    • 한국수자원학회 2010년도 학술발표회
    • /
    • pp.273-277
    • /
    • 2010
  • This research was performed to examine changes in the timing of the growth of crops along with changes in temperatures due tochanges and to analyze the change of water-supply-reliability by adding an analysis of the change of agricultural water supply patterns in the basin area of Miryang dam in Korea. Had-CM3 model from U.K. was the tool adopted for the GCM model, a stochastic, daily-meteorology-generation-model called LARS-WG was alsoused for downscaling and for the climate change scenario (A1B) which represents Korea's circumstances best. First of all, to calculate changes in the timing of the growth of crops during this period, the theory of GDD was applied. Except for the period of transplanting and irrigation, there was no choice but to find the proper accumulated temperature by comparing actual temperature data and the supply pattern of agricultural use due to limited temperature data. As a result, proper temperatures were found for each period. $400^{\circ}C$ for the preparation period of a nursery bed, $704^{\circ}C$ for a nursery bed's period, $1,295^{\circ}C$ for the rice-transplanting period, $1,744^{\circ}C$ for starting irrigation, and $3,972^{\circ}C$ for finishing irrigation. To analyze future agricultural supply patter changes, the A1B scenario of Had-CM3 model was adopted, and then Downscaling was conducted adopting LARS-WG. To conduct a stochastical analysis of LARS-WG, climate scenarios were generated for the periods 2011~2030, 2046~2065, 2080~2099 using the data of precipitation andMax/Min temperatures collected from the Miryang gauging station. Upon reviewing the result of the analysis of accumulated temperatures from 2011~2030, the supply of agricultural water was 10 days earlier, and in the next periods-2046~2065, 2080~2099 it also was 10 days earlier. With these results, it is assumed that the supply of agricultural water should be about 1 month ahead of the existing schedule to meet the proper growth conditions of crops. From the results of the agricultural water supply patterns should be altered, but the reliability of water supply becomes more favorable, which is caused from the high precipitation change. Furthermore, since the unique characteristics of precipitation in Korea, which has high precipitation in the summer, water-supply-reliability has a pattern that the precipitation in September could significantly affect the chances of drought the following winter and spring. It could be more risky to make changes to the constant supply pattern under these conditions due to the high uncertainty of future precipitation. Although, several researches have been conducted concerning climate changes, in the field of water-industry, those researches have been solely dependent on precipitation. Even so, with the high uncertainty of precipitation, it is difficult for it to be reflected in government policy. Therefore, research in the field of water-supply-patterns or evapotranspiration according to the temperature or other diverse effects, which has higher reliability on anticipation, could obtain more reliable results in the future and that could result in water-resource maintenance to be safer and a more advantageous environment.

  • PDF

테스트 단계를 고려한 소프트웨어 신뢰성 평가에 관한 연구 (A Study on an Evaluation of Software Reliability with Test)

  • 유창열;권대고
    • 한국컴퓨터정보학회논문지
    • /
    • 제3권2호
    • /
    • pp.1-6
    • /
    • 1998
  • 소프트웨어 개발 과정에서 신뢰성 평가는 대단히 중요하다. 테스트 단계를 구분하지 않은 소프트웨어의 신뢰도 평가˙분석의 결과는 신뢰성이 결여될 수 있다. 따라서 본 논문에서는 이러한 문제점을 해결하기 위해 테스트 단계를 구분하여 신뢰성 평가에 관한 연구를 하였다. 이를 위해 단위 테스트(Unit Test), 통합 테스트(Integration Test), 확인 테스트(Validation Test), 시스템 테스트(System Test)에서 발견된 결함 데이터를 이용하여 소프트웨어 신뢰도 성장 모델(Software Reliability Growth Model : SRGM)인 지수형, 지연 S자형, 습숙 S자형 SRGM에 적용하였다. 그 결과 단위 테스트에서는 습숙 S자형, 통합 테스트에서는 지연 S자형, 확인테스트에서는 지연 S자형, 시스템 테스트에서는 지수형 SRGM이 가장 적합한 것임을 입증하였으며, 신뢰성 평가 척도인 파라미터 추정, 편차 자승합, 기대잔존 결함수 등에서 본 연구의 결과가 기존의 방법보다 우수함을 보였다.

  • PDF