• 제어로봇시스템학회:학술대회논문집
• /
• 1996.10a
• /
• pp.177-180
• /
• 1996

The purpose of this paper is to design a robust adaptive control algorithm for a class of systems having continuous relay nonlinearity. This continuous relay nonlinearity can be defined as an analytic nonlinear function having unknown parameters and bounded unmodeling part. By this mathematical modeling, the whole system can be considered as a nonlinear system having unknown parameters and bounded perturbation. The control algorithm of this paper, RALC, can be constructed by robust adaptive law, feedback linearization, and indirect robust adaptive control. By this RALC, we can obtain that the output of given system can follow that of a stable reference linear model made by designer and the boundedness of all signals in closed-loop system can be maintained. Therefore, we can confirm a robust adaptive control for a class of systems having continuous relay nonlinearity.

• Journal of Broadcast Engineering
• /
• v.15 no.2
• /
• pp.157-162
• /
• 2010

In this paper, We propose that the adaptive cooperative relay transmission technique using closed-loop MIMO scheme for duplex communication system. As the mobility between relay and base station is little, closed-loop MIMO is better diversity gain than open-loop MIMO. At this time, more than one relaying terminals are included in one cooperative group to share their transmission and take precoding weight feedback. For minimization of throughput reduction caused by increasing feedback bits, we use codebook-based MRT that limit the number of feedback bits. Among the cooperative relay group, the best relays are selected from the base stataion and get the feedback. A protocol senarios are also proposed for this relay system.

• Proceedings of the KIEE Conference
• /
• 1999.07b
• /
• pp.609-611
• /
• 1999

The purpose of this research is on figuring out the optimal PID parameter using critical gain and critical frequency that are obtained by relay feedback. The operating has been done under the condition that the least information about the object plant is given and also the operating is processed within the limit which dose not give rise to bad influence on the object plant. For simulation auto-tuning PID controller using relay feedback which also works on on-line at the same time is developed by the upper procedure. This algorithm is tried to apply to level-temperature control plant on a real time with PC Interface Card.

• 제어로봇시스템학회:학술대회논문집
• /
• 2001.10a
• /
• pp.124.3-124
• /
• 2001

The nonlinearity of several chemical processes is usually approximated by a series of the nonlinear static element and the linear subsystem. In the case of the model that the nonlinear static element precedes the linear subsystem, it is called a Hammerstein model. It is a Wiener model when the order is reserved. Here we investigate a relay feedback identification method for Hammerstein type nonlinear processes. The proposed method separates the identification of the nonlinear static function from that of the linear subsystem by using a relay feedback method. From two times activation of nonlinear processes, we identify he whole range of the nonlinear static function as well as the ultimate information of the linear subsystem.

• Proceedings of the KIEE Conference
• /
• 2000.07d
• /
• pp.2636-2638
• /
• 2000

In this paper, we show the simple methods of designing the Smith predictor for the long dead time processes. We are using the relay feedback to model the processes in the second-order plus dead time structure. The model is able to represent a various class of processes dynamics including low- or high-order, and monotonic or oscillatory process. A PID type controller is proposed for the main controller in the Smith controller, which insure the stability of overall system. Simulation Examples are also provided to illustrate the effectiveness and applicability of the proposed controller.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.48 no.3
• /
• pp.28-35
• /
• 2011

Cooperative ARQ scheme is effective for better QoS guarantee for the next generation mobile communication systems where multimedia data transmission highly increases. In this paper, we propose a cooperative ARQ strategy in ad hoc cognitive relays for mobile multimedia communication for supporting instantaneous cooperation in MANET environment. In the proposed strategy, to support real time, delay-sensitive services, whenever a frame is transmitted from the source, each relay actively senses the SINR of the signal transmitted from the source, and determine whether to propose retransmission or not before the destination transmits feedback signal. To minimize the false retransmission decision or needless retransmission, we propose an adaptive sensing threshold optimization algorithm to maintain suboptimal sensing thresholds for each relay. By computer simulation, it is shown that the proposed cooperative ARQ retransmission scheme outperforms the conventional schemes with respect to frame transmission delay and frame loss probability in real time multimedia data transmission system.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.22 no.3
• /
• pp.31-42
• /
• 1985

Thig paper used two feedback sensors, that is, potentiometer and tachometer in order to control DC motor. Also, the state feedback and kalman regular type in the linear system or the state feedback and on-off relay type in the non-linear system are used as control meth-ods for optimal control values. This compared and analyzed the control estimate of tracking angles by the estimate of three branches of methods of position and speed measured, position and speed by PD and position, speed and covariance by an observer.

• Journal of Communications and Networks
• /
• v.13 no.4
• /
• pp.377-384
• /
• 2011

Cooperative beamforming has previously been proven to be an efficient way to improve the cooperative diversity. This method generally requires all relay nodes to participate in beamforming, which can be seen as "all participate" cooperative beamforming. However, not all relay nodes have constructive impacts on the end-to-end bit error rate (BER) performance. Based on this observation, we propose a new cooperative scheme which only selects those "appropriate" relay nodes to perform cooperative beamforming. Such relay nodes can be simply determined with mean channel gains. Therefore, the selection complexity is significantly reduced as global instantaneous channel state information is not required. This scheme guarantees that energy is only allocated to the "appropriate" relay nodes, and hence provides superior diversity. We also prove that power allocation among source and selected relay nodes is a convex problem, and can be resolved with lower computational complexity. Simulation results demonstrate that our scheme achieves an essential improvement in terms of BER performance for both optimal and limited feedback scenarios, as well as high energy-efficiency for the energy-constrained networks.

• Journal of Electrical Engineering and Technology
• /
• v.10 no.1
• /
• pp.395-400
• /
• 2015

Obtaining the parameters for PID controllers based on limit cycle information for the process in a relay controlled feedback loop has become an accepted practical procedure. If the form of the plant transfer function is known, exact expressions for the limit cycle frequency and amplitude can be derived so that their measurements, assumed error free, can be used to calculate the true parameter value. In the literature, parameter estimation for an assumed form of the plant transfer function has generally been considered for disturbance free cases, except a recently published work of the author. In this paper additional simulation results are reported on exact parameter estimation from relay autotuning under static load disturbances.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.9 no.5
• /
• pp.1682-1701
• /
• 2015

In this paper, we propose an intergraded unified imperfect CSI model and investigate the joined effects of feedback delay and channel estimation errors (CEE) for two-hop relaying systems with transmit beamforming and relay selection. We derived closed-form expressions for important performance measures including the exact analysis and lower bounds of outage probability as well as error performance. The ergodic capacity is also included with closed-form results. Furthermore, diversity and coding gains based on the asymptotic analysis at high SNRs are also presented, which are simple and concise and provide new analytical insights into the corresponding power allocation scheme. The analysis indicates that delay effect results in the coding gain loss and the diversity order loss, while CEE will merely cause the coding gain loss. Numerical results verify the theoretical analysis and illustrate the system is more sensitive to transmit beamforming delay compared with relay selection delay and also verify the superiority of optimum power allocation. We further investigate the outage loss due to the CEE and feedback delays, which indicates that the effect of the CEE is more influential at low-to-medium SNR, and then it will hand over the dominate role to the feedback delay.