• The Journal of the Korean Society for Microbiology
• /
• v.22 no.3
• /
• pp.267-273
• /
• 1987

In the analysis of plasmid profile obtained by agarose gel electrophoresis, the strain harvoring multiple reference plasmids of known molecular weight were needed to estimate the size of unknown molecular weight plasmids. Six strains of E. coli isolated from clinical specimens carried multiple plasmids and these strains could be available as a reference plasmids harvoring strain. These E. coli strains showed 4 to 9 plasmids of various size ranging 2.5 to 94.3 megadalton (Mdal). The correlation coefficients of linear regression between the relative mobility and molecular weight were 0.99966 to 1.00000. Among them, E. coli KE327 from throat which contained 7 plasm ids as follows: 79 Mdal, 46 Mdal, 33 Mdal(pKY3027 C), 4.9Mdal, 3.8Mdal(pKY3027 E), 3.5Mdal, and 2.7 Mdal. Relative amount of the pKY3027 C was the smallest(7.09%) and that of the pKY3027 E was the largest (24.24%) among the plasmid fractions of E. coli KE327.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.27 no.5
• /
• pp.457-462
• /
• 2005

The aim of this study is to evaluate the relative signal intensity of TMJ retrodiscal tissue in T2-weighted MRI as diagnostic marker of temporomandibular disorder(TMD). 58 temporomandibular joints from 29 TMD patients (14 men & 15 women) were evaluated. The relative signal intensity of retrodiscal tissue in T2-weighted MRI was referenced to brain gray matter same size of the region of interest(ROI). The collected data was compared to disc positions (normal, anterior disc displacement with reduction, anterior disc displacement without reduction), the presence of joint effusion. The relative signal intensity of retrodiscal tissue was significantly increased when the disc was displaced without reduction. And the relative signal intensity of retrodiscal tissue was significantly increased when joint effusion was present. The results suggest that evaluating the relative signal intensity of TMJ retrodiscal tissue using a T2-weighted MRI is valuable as a non-invasive tool for diagnosing the procession of TMD.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.15 no.1
• /
• pp.27-33
• /
• 2005

In this study, the process parameters in ceramics powder compaction are optimized for getting high relative densities of ceramic products. To find optimized parameters, the analytic models of powder compaction are firstly prepared by 2-dimensional rod arrays with random green densities using a quasi-random multiparticle array. Then, using finite element method, the changes in relative densities are analyzed by varying the size of Al₂O₃ particle, the amplitude of cyclic compaction, and the coefficient of friction, which influence the relative density in cyclic compactions. After the analytic function of relative density associated process parameters are formulated by aid of the response surface method, the optimal conditions in powder compaction process are found by the grid search method. When the particle size of Al₂O₃ is 22.5 ㎛, the optimal parameters for the amplitude of cyclic compaction and the coefficient of friction are 75 MPa and 0.1103, respectively. The maximum relative density is 0.9390.

• Geomechanics and Engineering
• /
• v.28 no.5
• /
• pp.521-529
• /
• 2022

This research work deals with the development of air pluviation method for preparing uniform sand specimens for conducting large scale laboratory testing. Simulating real field conditions and to get reliable results, air pluviation method is highly desirable. This paper presents a special technique called air pluviation or sand raining technique for achieving uniform relative density. The apparatus is accompanied by a hopper, shutters with different orifice sizes and numbers and set of sieves. Before using this apparatus, calibration curves are drawn for relative density against different height of fall (H) and shutter sizes. From these calibration curves, corresponding to the desired relative density of 60%, the shutter size of 13mm and height of fall of 457.2 mm, are selected and maintained throughout the pluviation process. The density obtained from the mobile pluviator is then verified using the Dynamic Cone Penetrometer (DCP) test where the soil is poured in the box using defined shutter size and fall height. The results obtained from the DCP test are averaged as 60±0.5 which was desirable. The mobile pluviator used in this research is also capable of obtaining relative densities up to 90%. The instrument is validated using experimental and numerical approach. In numerical study, Plaxis 3D software is used in which the soil mass is defined by 10-Node tetrahedral elements and 6-Node plate is used to simulate plate behavior in the validation phase. The results obtained from numerical approach were compared with that of experimental one which showed very close correlation.

• Computers and Concrete
• /
• v.9 no.1
• /
• pp.1-19
• /
• 2012

The size-effect study of various fracture parameters obtained from two parameter fracture model, effective crack model, double-K fracture model and double-G fracture model is presented in the paper. Fictitious crack model (FCM) for three-point bend test geometry for cracked concrete beam of laboratory size range 100-400 mm is developed and the different fracture parameters from size effect model, effective crack model, double-K fracture model and double-G fracture model are evaluated using the input data obtained from FCM. In addition, the fracture parameters of two parameter fracture model are obtained using the mathematical coefficients available in literature. From the study it is concluded that the fracture parameters obtained from various nonlinear fracture models including the double-K and double-G fracture models are influenced by the specimen size. These fracture parameters maintain some definite interrelationship depending upon the specimen size and relative size of initial notch length.

• Korean Journal of Poultry Science
• /
• v.13 no.2
• /
• pp.167-172
• /
• 1986

Chromosome size, number and shape were studied by the centromeric index, the arm ratio and the relative length of chromosome. The chromosomes of 50 early chick embryos which were derived from a pure line of Single Comb White Leghorns were examined. Using a colchicine, hypotonic treatment, fixation and air-drying technique, the clear prometaphase figures were obtained from the whole embryo. The results of the present investigation of chromosome pairs were as follows, 1. Pair 1 and 2; metacentric and submetacentric chromosomes which could be clearly distinguished from each other by size. 2. Pair 3 and 4: acrocentric chromosomes of similar length but the 4th pair had a distinct short arm which was not present in the 3rd. 3, Pair 5; metacentric sex chromosomes, 2 chromosome had relative 5th length but the W chromosome had slightly shorter length than 7th pair of chromosomes. 4. Pair 6; acrocentric chromosomes similar in shape to pair 3 but of little more than half the size. 5, Pair 7 and 8; acrocentric chrocentric but the 7th pairs had a definite short arm. 6. Pair 9; similar length to the 7, 8 pairs but had a medially placed centromere. 7. microchromosomes of 30 pairs ; nearly all acrocentric chromosomes which appeared as paired dots. The total number of diploid was appeared to 72-78. But a number of observations presented the total diploid number in 78 (58%). The inconstancy in number observed in this study was presumably due to the minute size of the microchromosomes. Thus, the modal numbers for the diploid chromosome was at least 78.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.9 no.2
• /
• pp.77-81
• /
• 1989

This experiment was conducted to elucidate the changes of dry matter production in permanent pasture and its relation with relative yield of the 1st cutting, regrowth capacity, and persistance of orchardgrass sward, based on the data of preceeding The results were summarized as follows; 1. Relationship between relative yield of the 1st cutting and regrowth capacity were changed by the times of established pasture. Thus, the relative yield of the 1st cutting have negative significant correlation (P < -0.001) with regrowth capacity. 2. Regrowth capacity(RC) was positively significant correlations with the dry weight of plant (DW/pl.), number of tillers per plant (NT/pl.), plant size(PS) and distance between adjacent plants (DIS) of the 1st cutting. Also, regrowth capacity(RC) was positively correlations with the dry weight of plant (DW/pl.), number of tillers per plant (NT/pl.), stubble diameter(DIA), stubble area(SB), plant size(PS) and distance between adjacent plants(D1S) of the 2nd cutting. 3. The coefficients of regression of the 1st cutting showed a tendency to slightly decrease, on the other hand, the 2nd cutting and total yield were tended to increase by the times of established pasture. 4, Between the regrowth capacity and persistency were may deeply concerned to the changes of dry matter production in permanent pasture. 5. The process of dry matter production in permanent pasture can be shown in following diagrams.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2000.10a
• /
• pp.124-127
• /
• 2000

The finite element analyses of the wrinkling initiation and growth in the sheet metal forming process provide the detailed information about the wrinkling behavior of sheet metal. The direct analyses of the wrinkling initiation and growth, however, bring about a little difficulty in complex industrial problems because it needs large memory size and long computation time. For the description of wrinkling growth, the mesh elements should be sufficiently small and the size of finite element matrix becomes large. In the static implicit finite element method therefore, the direct analysis of wrinkling growth in a complex sheet metal forming process is rather difficult. From the industrial viewpoint of tooling design, the readily available information of possibility and location of wrinkling is sometimes more preferable to the detailed time-consuming information. In the present study, therefore, the wrinkling factor that shows locations and relative possibility of wrinkling initiation is proposed as a convenient tool of relative wrinkling estimation based on the energy criterion. The location and relative possibility of wrinkling initiation are predicted by calculating the wrinkling factor in various sheet metal forming processes such as cylindrical cup deep drawing, spherical cup deep drawing, and elliptical cup deep drawing. The wrinkling factor is also implemented in the analysis of the door inner stamping process to predict wrinkling.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.21 no.9
• /
• pp.1030-1036
• /
• 2010

This paper proposes a simulation design for feeding probe with the CMM(Cylindrical Magneto Material) structure for broad bandwidth of a dipole type antenna. In order to ensure low frequency bandwidth, the magnetic material with high relative permeability was considered in design calculation. It was confirmed that the broad bandwidth was independent on the relative permeability value and depended on the control of distance($r_m$) between magnetic material and feeding probe, and of magnetic material thickness($t_m$). Furthermore, an antenna size with the CMM was miniaturized about 18 % comparison with its size without the CMM.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.13 no.2
• /
• pp.243-251
• /
• 1989

Assuming plastic zones spreading out on each slip plane of the two materials under out-of-plane shear loading, the size of each plastic zone is computed. The effect of the different frictional shear stresses in the two materials on the size of each plastic zone and the relative displacement at the crack tip are investigated. The relation between the J-integral in this model and the relative displacement at the crack tip is also obtained.